Stability welding process, welding spatter small.
焊接过程稳定，焊接飞溅小。
Tack weld shall be the same with welding process of formal welding.
定位焊应与正式焊接的焊接工艺相同。
It studied some problems about the welding process monitoring system.
对焊接过程检测系统的一些相关问题进行了研究。
Numerical simulation is an important method for investigating of resistance spot welding process.
数值模拟是研究电阻点焊过程和机理的重要手段。
The advantages of all-position automatic welding process in pipeline construction are introduced.
介绍了管道全位置自动焊接施工过程和全位置自动焊接的优点。
Welding process factors consist of welding electric current, electric arc voltage, welding speed, etc.
焊接工艺因素包括焊接电流、电弧电压、焊接速度等。
The new welding process has made possible the wide application of stainless steel in petroleum industry.
新的焊接工艺使不锈钢有可能广泛应用在石油工业中。
The loop circuit controlling of current, voltage and speed of welding can be realized in welding process.
在焊接过程中，对电弧电压、焊接电流、焊接速度实现闭环控制。
In addition, the choice of the weld shape strongly affects the welding process and the manufacturing costs.
另外焊缝形状的选择对焊接工艺及制造成本有着重要的影响。
In the multilayer welding process, the method of symmetry welding gets the minimum residual tensile stress.
在多层焊的过程中，采用对称施焊的方法得到的焊接残余拉应力峰值是最小的。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
焊接过程对被焊工件来说，是局部的不均匀加热过程和不均匀冷却过程。
The optimum prescription was finally determined by the property tests of the welding process and weld metal.
经过焊接工艺性能和焊缝金属力学性能测试，最终确定最优配方。
The demand to welding process of high-frequency welding pipe is introduced, some related parameters proposed.
介绍了高频焊管对焊接工艺的要求，提出了有关工艺及技术参数。
These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.
这些夹具是必不可少的，以确保最优质的焊接变形和焊接过程中最低。
The stability of welding process and the quality of welding seam are decisively affected by the welding current wave.
焊接电流波形对焊接过程稳定性和焊缝质量起着决定性的作用。
Therefore, it is a reliable service for your soldering and welding process to provide full responsibility for the support.
因此，有可靠的服务为您的钎焊及焊接加工提供全面负责的支持。
Through the acquisition of welding currents and voltages during welding, the arc behavior of welding process was analyzed.
对焊接过程的电流及电压波形进行采集，分析焊接过程的电弧行为。
The purpose of weld guide bending test is to detect plasticity of welding joint, welding process and surface defects of materials.
焊缝导向弯曲试验的目的是检查焊接接头的完好性和塑性以及材料的焊接工艺和表面缺陷。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
The article discussed the welding parameter, surfacing position and magnetic control to affect welding process and overlay properties.
讨论了焊接参数，堆焊位置、磁场控制等对堆焊工艺及堆焊层性能的影响。
Secondly, the new expert system can design welding procedures for not only single welding process but combined welding processes as well.
其次，不仅可以进行单一焊接方法的工艺设计，而且可以进行组合焊接方法的工艺设计。
We also present effective control measures for the problems such as flammability and big transformation in magnesium alloy welding process.
对镁合金焊接过程中易燃烧、焊接变形大等问题提出了有效的控制措施。
The reasonable joint shape and welding process are obtained, whi ch is to provide better reference for the welding technology of this seam.
通过分析得出其合理的T型接头形式和施焊方法，为压力容器中此类焊缝的焊接提供参考作用。
Adopting movable vertical rib plate welding process can not only prevent welding deformation but also enhance working efficiency evidently.
提出的采用活动式立筋板焊接操作工艺不仅可以防止焊接变形，而且明显提高工效。
Because of the complexity of welding process, the research of weld process produce hot and stress through method of experiment is very difficulty.
因为焊接过程的复杂性，所以很难通过实验的方法对焊接过程产热和应力分布进行研究。
The acquired data can reflect the factual welding process rightly, furthermore, the welding process can be well repeated by using the welding parameters.
采集的数据能正确反映焊接实际过程，焊接参数经还原后可实现焊接过程参数的可追溯性。
The application of Ar-CO2 mixed gas in the welding of low-carbon steel could improve welding process, increase welding quality and decrease welding cost.
CO2混合气应用在低碳钢焊接上，可以改进焊接工艺，提高焊接质量，降低焊接成本。
The application of Ar-CO2 mixed gas in the welding of low-carbon steel could improve welding process, increase welding quality and decrease welding cost.
CO2混合气应用在低碳钢焊接上，可以改进焊接工艺，提高焊接质量，降低焊接成本。
应用推荐