Jinzhou welding rod factory (swan sign);
锦州电焊条厂（天鹅牌）；
Suitable for the welding of sour, alkalescence welding rod.
适用酸、碱性焊条的焊接。
With arc starting and push current, effectively prevent welding rod sticking.
具有引弧，推力电流，有效防止焊条粘结。
Suitable for acidic, alkalescent, refractory steel welding rod of diameter of 2 ~ 6.
适用于直径2 ~6的酸性、碱性、耐热钢等多种焊条焊接。
The choice of plan, welding rod and technology of mending the broken tooths of a roller are much discussed.
着重论述了冷焊修补压榨辊崩齿的方案选定、焊条选择和工艺。
Is familiar with all weld process equipment for example welding rod, welding torch and electric welding equipment.
熟悉所有的焊接工艺设备，如焊条，焊钳和电焊机等。
The smelting technology of H08A welding rod steel is analyzed, some measures against the problems existing proposed.
分析了宣钢炼铁厂H 08 A的冶炼工艺，对其存在的问题提出了改进措施。
Other alloy powder or mineral may be also added into the welding rod material to raise some performance of the welding rod.
为了增加焊条的某些性能，还可在其组分中添加其他合金粉或矿物质。
The welding rod has good wearing resistance and needn't warm before welding, which may be used to the surfacing of the roller.
该焊条耐磨性能好，焊前不预热，可用于轧辊的堆焊。
The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.
由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。
It points out that reasonable drug composition of welding rod can improve the low temperature properties of low carbon steel weld.
指出合理的焊条药皮组分可明显提高低碳钢焊缝的低温性能。
The design of the elements of composite pneumatic welding rod holders and the application of CAD for the composite design are presented.
介绍组合式气动焊钳各元件的设计及其采用CAD进行焊钳的组合设计和组合式设计的优点。
The machine is a special equipment for producing welding rod and this machine undertakes the coating procedure among the welding rod production.
本机是电焊条生产的专用设备，在焊条生产中该机承担涂粉工序。
By raising stress level in the condition of unchanging failure mechanism of combustion welding rod, failure data was acquired in very short time.
在不改变燃烧焊条失效机理的前提下，通过提高应力水平，在很短时间内得到焊条的失效数据。
Based on the fracture site investigation and macro-rod fracture analysis, the welding rod fracture occurred in the vicinity of the weld fusion line.
通过对最近的一次断裂拉杆现场调查和宏观断口分析，发现断裂发生在拉杆的补焊焊缝熔合线附近。
For those local surface defects on chrome steel and chrome-molybdenum steel, welding rod A402 may be used for repairing, no other treatment is necessary.
铬钢和铬钼钢表面局部缺陷焊补可采用A402焊条补焊，不需处理。
Both sealed surfaces of the seat and disc are overlaying welded with Fe base stainless steel welding rod so as to improve wear resistance and erosion resistance.
阀座、阀瓣密封面均由铁基铬镍不锈钢焊条堆焊而成，提高了耐磨性和抗冲蚀性。
But whether high chrome cast iron welding rod produces more crack in the overlaying process is with the relation of more horniness carbonization in its organization.
而高铬铸铁型焊条，在堆焊过程中出现较多裂纹，与其组织中有较多的硬质碳化物有关。
Forming process of combustion welding rod was studied and the best parameters of forming process are following: controllability of the burning with the density of the rod 2.
通过对燃烧型焊条成型过程实验研究，得出最佳成型工艺参数：药粉密度在2。
Comprehensive analysis shows that the welding rod material has poor welding performance, if the cooling rate after welding is too rapid, then the welding stress can be too large.
综合分析表明，拉杆材料焊接性能差，焊后冷却速度过快，以致焊接应力过大。
A new kind of the sintered wear-resisting and heat-resisting deposit welding rod which has perfect processing property is produced and studied by cold-cementing extrusion process.
采用冷粘结挤压法，研制了一种工艺性能良好的烧结型耐磨耐热堆焊焊条。
Industrial grade sodium alginate, the main reactive dyes for dyeing and printing and paper industry as sizing, welding rod coatings, thickening of cosmetics, detergents and so on.
工业级海藻酸钠，主要用于印染工业作为活性染料和造纸施胶、电焊条涂层、增稠化妆品、洗涤剂等。
The invention relates to a welding rod material for sulfur resisting dew point corrosion steel, in particular to an electrode covering for sulfur resisting dew point corrosion steel.
本发明涉及抗硫露点腐蚀钢的焊条材料，特别涉及一种用于抗硫露点腐蚀钢的焊条药皮。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
The design of the elements of composite pneumatic welding rod holders and the application of CAD for the composite design are presented. Discussed also is the advantages of composite design.
介绍组合式气动焊钳各元件的设计及其采用CAD进行焊钳的组合设计和组合式设计的优点。
Considering the characteristic of thermite and the concrete structure of the welding rod, the design scheme of special-purpose flame igniter is adopted, and the igniter is designed in detail.
针对焊接药剂的特点，并结合焊条的具体结构，采用专用火焰点火器点燃焊条的设计方案，并对点火器进行了详细设计。
The pressing means (36) is filled with a gaseous or liquid medium via the supply unit (39) in order to adjust the contact pressure applied to the welding rod (13) by the conveying means (28).
所述压力机构（36）通过供给单元（39）填充有气态或液态介质，以调节由输送机构（28）施加在焊线（13）上的接触压力。
The welding rod capable of forming pile-up welded graphite-steel metal consists of welding rod core of low-carbon steel and nickel or nickel-base alloy and coating outside the welding rod core.
本发明公开了一种可通过焊接形成石墨钢堆焊金属的焊条。它由低碳钢、镍或镍基合金制成的焊芯和压涂在焊芯外表面的焊条药皮构成；
The results show that adopting CO2 gas protective welding instead of electrode welding rod can increase the efficiency of ensuring welding quality, which can also bring better economical benefit.
经过实践证明，替代焊条电弧焊，而采用CO2气体保护焊可提高效率，保证焊接质量，带来较好的经济效益。
Welding Industry Co. , Ltd. Wuxi card is based on the production of stainless steel welding rod, welding electrodes, cast iron welding rod mainly three categories of professional production facility.
无锡王牌焊材工业有限公司是以生产不锈钢焊条、堆焊焊条、铸铁焊条三大类为主的专业生产工厂。
应用推荐