根据输出结果成功进行激光烧结工艺参数优化。
The laser sintering parameter was optimized successfully according to exported results.
该系统由工艺参数优化模块和缺陷诊断模块组成。
The system is composed of technical parameter optimization module and defect diagnosis module.
提出了数学模型的实验修正方法和工艺参数优化设计方法。
The modified method for the regression models and the optimization method for the technological parameters are proposed.
对此提出一种基于最大熵原理的平面研抛工艺参数优化方法。
A method based on maximum entropy principle was presented to optimize processing parameters in plane polishing.
本文针对黄磷生产的特点，对磷炉工艺参数优化进行了研究。
This paper studies phosphor furnace processing parameters optimization aiming at the trait of yellow phosphor production.
工艺参数优化后的激光无氧切割可获得基本无挂渣、无氧化的光滑切割断口。
The parameter - optimized laser fusion cutting can obtain smooth cut edges without dross and oxidation.
阐述了应用MATLAB优化函数对砂带磨削进行工艺参数优化的过程和方法。
It was described the process and methods of parameters optimization for the abrasive belt grinding by using MATLAB optimization function.
因此，论文主要研究面向批量生产时复合装甲制孔加工工艺和工艺参数优化问题。
Therefore, this thesis did thorough researches in allusion to the problems of making hole processing technology in the composite armor and optimizing craft parameters when it was in mass production.
本文在数控切削加工工艺参数优化方面主要进行了基于加工特征的刀具选择的研究。
In this paper, we mostly discussed the cutting tool choice based on the feature of cutting process as belongs to the optimization of NC machining process parameters.
根据最优化技术的原理，建立以提高丙烷收率和降低能耗为目标的工艺参数优化模型。
And by the principle of optimization technology, a optimization model was set up which aimed to improve the C_3 recovery rate and reduce the total energy consumptions.
实际应用表明，该系统解决了工艺参数优化设置问题，提高了铸铁型材的生产质量和效率。
The application result demonstrates that this system solves the question of drawing technics parameter optimization and advances quality and efficiency of cast iron production.
在DK903型梳棉机上利用NCT进行了工艺参数优化试验，有效控制了梳棉结杂数量。
Optimizing test of technology parameters was done in DK903 carding machine by using NCT, and the Numbers of carding trashes were controlled.
在此基础上，就所给的焊道尺寸要求值进行了焊接工艺参数优化，取得了较为满意的结果。
The welding parameters selected on the basis of the model may give fairly satisfactory results in the requisit…
为大型框锻件的工艺参数优化，锻后组织控制以及缺陷预测与消除等提供了必要的技术支持。
They provide necessary technical support for the optimization of process parameters and the implement of structure controlling after forging.
通过计算分析，在现有顶管机的基础上进行工艺参数优化，可扩大机组生产的产品规格和品种。
Based on the said calculation and related analysis, process parameter optimization is done to expand product mix in terms of size range and variety.
示例表明：建好后的网络模型可对乙烯生产装置进行快速工艺参数优化，获得较优的操作数据。
An example showed that the process parameters of the ethylene plant can be speedily optimized by the genetic network model, and higher ethylene yield can be obtained.
铣削加工有限元模拟研究为铝合金切削加工的工艺参数优化、刀具的优选和工艺规划奠定了基础。
The study has laid a base for material process parameter optimization, tool selection optimization and technics programming.
依据振动时效机理，应用模态分析技术，提出一种盘类铸件振动时效工艺参数优化设计的新方法。
The new method of the re-engineering VSR parameters of circle plate casting is figured out based on the modal Analysis technology.
首先给出了可拓关联的定义及计算方法，接着给出了基于可拓关联的注塑成型工艺参数优化方法。
The definition and calculation method of extensive correlation were given at first, and the optimum method on the craft parameters of plastic injection based on extensive correlation was given too.
提出并实现了铸铁型材水平连铸拉坯工艺参数优化专家系统，并对系统的关键技术进行了设计和讨论。
This paper presents and realizes drawing blank technics parameter expert system of iron continuous casing and discusses its key realizing technology.
论述了TC 201空气压缩机组性能运行状况和工艺参数优化。使之降低蒸汽消耗，降低生产成本。
The operation condition and technological parameters optimization and adjustment of TC201 air compressor units are introduced. The steam consumption is reduced, the production cost is decreased.
同时，规划采用遗传算法进行工艺路线和工艺参数优化的技术路线，确定各自目标函数及其物理意义。
Meanwhile, study on technical route of optimizing process parameters and process route using genetic algorithms. Determine each objective function and its physical meaning.
本文采用传统方法进行电火花线切割加工工艺参数优化，分别建立了加工速度和表面粗糙度的数学模型。
This article is about the processing parameter optimization achieved through the traditional method to set a mathematical model of the processing speed and surface roughness.
本文主要研究以冲压变形规律设计的预制孔管件一次成形特定高度的三通管是可行的，但需对工艺参数优化。
This paper proposes that: the deformation in stamping design prefabricated hole forming specific height fittings first tee is feasible, but needs to process parameter optimization.
传统的注塑模CAE分析可以事先发现注塑成型中的潜在问题，如翘曲等，但是不能实现注塑工艺参数优化。
The traditional CAE analysis of plastic injection molding can only reveal potential problems in plastic injection, such as warp, but it does not optimize the process parameters.
传统的注塑模CAE分析可以事先发现注塑成型中的潜在问题，如翘曲等，但是不能实现注塑工艺参数优化。
The traditional CAE analysis of plastic injection molding can only reveal potential problems in plastic injection, such as warp, but it does not optimize the process parameters.
应用推荐