气体和液体都是完全的弹性体。
介绍聚氨酯弹性体的注塑模具的设计。
This paper introduced the injection mold design of the Polyurethane elastomer.
有能力为客户解决弹性体方面的问题。
在化学工业中，聚合用于生产合成树脂和弹性体。
In chemical industry, polymerization is used to produce synthetic resins and elastomers.
在硫化，一系列的交叉环节引入弹性体给它的实力。
In vulcanization, a series of cross-links are introduced into an elastomer to give it strength.
木材不是完全弹性体，其力学性质具有明显的粘弹性。
Being not a perfect elastic substance, wood behaves some viscoelastic properties in many respects.
介绍了热塑性聚酯弹性体的合成、性能、加工和应用。
The synthesis, property, processing and application of thermoplastic polyester elastomer (TPEE) were introduced in this paper.
聚酯弹性体设计用于吹塑或处理技术要求高熔体粘度。
A thermoplastic polyester elastomer designed for blow molding or processing techniques requiring high melt viscosity.
涂刷后，涂膜水分挥发后即成为橡胶状弹性体的防水层。
Besmear after coating moisture volatilizes then becomes rubber shape of elastomer waterproof layer.
广泛应用于高回弹冷熟化，微孔弹性体及半硬质聚氨酯泡沫塑料制品。
They are widely used in high elastic resilient cold cure, microporous elastomer and semi-rigid polyurethane foam plastics.
实验结果表明，随着弹性体含量的增加，热变形温度降低。
The results showed that HDT of the elastomer-modified PP decreases with increasing the elastomer content.
介绍了聚氨酯弹性体微相分离的影响因素、研究手段和表征方法。
The influence factors, studying means, and characteristic methods of the polyurethane elastomers were elucidated.
热塑性聚酯弹性体的这种特殊等级包括热稳定，阻燃和吹塑成型。
Special grades of this thermoplastic polyester elastomer include heat stabilized, flame retardant and blow molding.
混凝土并非理想弹性体，不同测试方法中波的传播规律是不同的。
Concrete is not a ideal elastic material, and laws of wave propagation are not same with different wavelength.
对比例加载时弹性体压剪裂缝的变形及接触摩擦力问题进行了研究。
The deformation and contact frictional force of elastomer pressure shear break are studied in proportion loading .
通过研究聚氨酯弹性体的组成及配比，制备了低成本聚氨酯铺装材料。
A low cost polyurethane paving materials were produced by studying compositions and ratio of polyurethane elastomer admixture.
减震插片：拍柄内置热塑性橡胶内核同热塑性弹性体，有效减少球拍震动。
Shock eraser insert: thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.
讨论了母料的配比、用量和软化剂对热塑性弹性体SBS各种性能的影响。
The effects of combination ratio and dosage of masterbatch and softeners on the properties of SBS elastomer were investigated.
热塑性弹性体组合物，发泡产品，以及所述组合物或发泡产品的制备方法。
Thermoplastic elastomer composition, foam product, and process for production of the composition or foam product.
计算结果表明，传统的点偶极子模型高估了磁流变弹性体的磁致剪切模量；
Results show that, conventional point dipole model has overrated the magnetic-induced shear modulus of the magnetorheological elastomers.
与传统的弹性体和塑料相比，聚氨酯产品的强度，耐久度和多功能性更出众。
Compared with conventional elastomers and plastics, polyurethane products offer superior strength, durability and versatility.
聚醚醋嵌段共聚弹性体纤维（简称PEET）是针织工业用的新型化纤原料。
Polyether ester block copolymerized elastomer fibre (PEET) is a new type of man-made fibre for knitting industry.
聚四亚甲基醚二醇(PTMEG)是生产氨纶和聚氨酯弹性体的重要原料之一。
Polytetramethylene ether glycol (PTMEG) is one of important materials for production of spandex and thermoplastic polyurethanes elastomer (PU).
这里的根本问题是，人人都忘记了一个无约束系统具有弹性体模态以及刚体模态。
The basic problem here is that everyone forgot that an unconstrained system has flexible modes AND the rigid body modes.
本文用相似理论推导了线弹性体在自重体积力作用下原型与模型间的位移关系式。
The relation between displacement of prototype and that of model if derived for the linear elastic body at its body force condition of self-weight based on the similarity theory.
主要的类型有浇注型聚氨酯弹性体、混炼型聚氨酯弹性体和热塑性聚氨酯弹性体。
The main types are cast polyurethane elastomer, millable polyurethane elastomer and thermoplastic polyurethane elastomer.
利用有限元和冲击理论建立了SP压力调宽机含间隙的刚体和弹性体的动力学模型。
The SP mill dynamics model rigid and flexibility with clearance was built using finite element and impact theory.
结果表明，喷涂聚脲弹性体可有效地防止挡潮闸钢闸门的腐蚀，具有较长期的经济效益。
It was found that the sprayed polyurea elastomer could be used to efficiently prevent the steel gate from corrosion, and the technology could have enormous long-term economic benefit.
当支持弹簧刚度变得越来越大时，随着弹性体属性变得越来越突出，刚体模态属性将减少。
When the support spring stiffness gets larger and larger, the rigid body mode characteristic will diminish as the flexible characteristic becomes more pronounced.
当支持弹簧刚度变得越来越大时，随着弹性体属性变得越来越突出，刚体模态属性将减少。
When the support spring stiffness gets larger and larger, the rigid body mode characteristic will diminish as the flexible characteristic becomes more pronounced.
应用推荐