从由曲线普通方程求平面图形面积的公式出发推出在各种情形下由曲线参数方程求平面图形面积的公式。
From commonly used equation of calculating plane figure quadrature, formulas of calculating plane figure quadrature by applying curve parametric equation can be deduced.
从由曲线普通方程求平面图形面积的公式出发推出在各种情形下由曲线参数方程求平面图形面积的公式。
The cube formed after cutting one part off the same planar graph in different ways of motion and its method of calculation are introduced.
我们主要还是关注，参数方程的运用，主要是一维的，比如直线、曲线等。
So, we have mostly focused on the use of parametric equations just for one dimensional objects, lines, and curves.
在此参数表示下，模糊数可直接视为二维度量空间r 2中的有界连续曲线，这给分析模糊微分方程带来了便利。
By the parametric representation, fuzzy number means a bounded continuous curve in the two-dimensional metric space R2, so that it is easy to analyze fuzzy differential equations.
通过水分特征曲线方程对试验数据的拟合，研究了拟合参数随干密度的变化情况。
A equation was used to fit the data of SWCC, and the relation between fitting parameters and dry density was studied.
参数编程在生产实践中有着广泛的应用，尤其在手工编写铣削方程曲线轮廓和球面时更为常用。
Parameter programming has been applied to extensive practice fields, especially for milling curve contour of equation or milling and sphere surface as manual programming.
凡是可以表示为矢量参数方程的正则曲线，都可以用该方法进行插补。
Any regular curve that can be expressed by the vector parameter equation may be interpolated by this method.
推进剂松弛模量主曲线及W.L.F。方程参数的拟合处理。
Fitting of relaxation modulus master curve for solid propellant and W. L. F. equation parameters.
给出了求解岩石冲击波初始参数的基本方程和极曲线方法。
The basic equations and the polar curve method to solve the initial parameters of shock wave in rock are also developed.
当单调函数的反函数不能显性表示时，连续型随机变量的分布密度曲线仍可通过参数方程的形式获得。
When a inverse function of monotone function can not show the explicit formula, the distribution density curve of continuous randon variable can be gained with a parametric equation.
同时，对具有参数方程形式表示的非圆曲线进行了等间距直线逼近的节点误差分析。
While there is the analysis of node tolerance with parameter equation on approaching along a straight line with equal step.
对于给定的等幅疲劳成组试验数据，利用三参数幂函数方程来描述P - S - N等幅曲线。
According to the given experimental constant amplitude fatigue life group data, the three parameter exponential function equation can be adopted to describe the constant fatigue P-S-N curve.
分析了用曲线拟合估计粘弹性材料线性本构方程模型参数的原理和方法。
The principle and method for fitting and estimation of constitutive equation model parameters are discussed.
结合双槽凸轮的参数设计和其曲线的基本走向，得出了内、外凸轮曲线的方程。
The curvilinear equations of the inner and outer cams are obtained based on the analysis on the parameter design and the curve shape of the double-slot CAM.
根据统一蠕变模型和该模型导出的蠕变方程，研究了分级加载条件下的岩石蠕变特性，并且通过曲线拟合得出了相应的蠕变参数。
Based on the unified creep model and the relevant creep equations, the creep properties of rock under step load is studied, and the corresponding creep parameters by fitting curves are obtained.
然后针对给定参数方程的曲线，提出一种圆弧拟和的实用算法。
And then, we provide an algorithm for approximating an arbitrary parametric curve by circular arcs.
对已有流体机械逆求其流道曲线，由于不知道性能参数无法直接用伯努里方程；
To find the passage curve for a given fluid machine, the parameters in the equation are unknown.
通过实验获得的蠕变曲线和岩石参数，回归出了盐岩的蠕变本构方程，结果表明该方程能较好的模拟实验结果。
Through the creep characteristic curves and parameters, the creep constitutive equation of rock salt is regressed and agrees with the experiment result.
用热释光一般级动力学方程拟合发光曲线，得到了峰参数和陷阱参数值。
The peak parameters and trap parameters were estimated by fitting these curves using the TL general kinetic order equation.
首先，我们运用流体力学的原理，分析推导出流曲线曲面的参数方程，实现了挤压型腔的数学建模。
First, we realize the mathematic model through getting the parameterized equation by analyzing the fluid mechanics and make use of Bezier curve to approximate stream curve.
本文讨论了参数方程和极坐标方程表示的曲线的对称性，给出了判定这两种曲线的对称性的充分条件。
In this paper, the symmetry of curved lined given by parametric equation and polar coordinates equation is discussed and the sufficient conditions are given.
本文论述曲线族的方程为关于参数的三次方程时，其包络曲线方程的初等求法。
This paper discussed an elementary solution to the envelope of a kind of family of curves of which the equation was one of the cubic equations in regard to a parameter.
本文推导出计算机绘图中的二次B一样条曲线的参数方程，介绍二次B一样条曲线的性质，并给出在逼近曲线时的特殊处理方法。
This paper infers the parametric equation of the quadric B-spline curve, introduces its character, and gives the special method of process when the curve is approximated.
结合柔度曲线方程，分析稳定性设计关键参数和控制方法。
With flexibility curve function, the key parameters and controlling methods for stability design are analyzed.
给出了多项式参数方程定义的参数曲线的有效隐式化算法，此算法主要是基于矩阵理论。
This paper presents an efficient algorithm for the implicitization of parametric curves defined by polynomial parametric equations, which is mainly based on the theory of matrices.
本文将分别对双曲线、抛物线的参数方程阐述几何意义(见例2、例3)。
This paper describes the geometric meaning for the parametric equation of hyperbola and parabola, respectively (see examples 2 and 3).
分别介绍了用分段多项式和朗培其一奥斯古特三参数方程拟合应力应变曲线并求切线模量和割线模量的方法。
By piecewise polynomials and the Ramberg-Osgood three-parameter equation fitting the stress-strain curve, the expressions of the tangent and secant modulus are derived.
文中导出了五次代数式缓和曲线的参数方程和曲线各元素的公式；
The parameter equation and the formula of each element of the curve are set up and compared with that of clothoid.
从测树学中对树干形状的描述出发，选择经典的孔兹干曲线式推导出可变参数的削度方程，理论依据可靠。
From the study of tree trunks described in Forest mensuration, the classic curve-derived were chosen to deduct the taper equation of variable parameters, which is reliable in theoretical basis.
前言： 空间三维曲线有两种数学表达形式：隐式方程曲线及参数方程曲线。
There are two kinds of curve definitions: implicit curve and parametric curve.
应用推荐