方法：三维有限元分析方法。
采用有限元分析方法，对传剑系统进行了动态分析。
By using finite element analytical method, dynamic analysis has been carried out on this model.
研究模糊桁架结构在模糊力作用下的有限元分析方法。
The analysis methods of the finite element for fuzzy truss structures under fuzzy loads action are studied.
采用有限元分析方法分析通道内的流型和剪切力分布。
The flow and the shear stress distribution of the channel were computed by limited volume method.
并用有限元分析方法进行了验证，比较了两种方法的差别。
The system model method is validated by comparing the frequencies with those obtained from finite element analysis method.
本文介绍了一种透声面元PVDF水听器的有限元分析方法。
This paper describes a finite element method analysis of an acoustically transparent planar PVDF hydrophone.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
本文提出了预应力混凝土桥梁结构弹性工作阶段的有限元分析方法。
This paper presents a finite element method of analyzing the secondary forces of prestressed concrete bridge.
利用显示动力学有限元分析方法，模拟了波纹轨腰钢轨的轧制过程。
The rolling process of corrugated waist rail is simulated by explicit dynamic FEM.
采用有限元分析方法分析了硬三角胶尺寸对轮胎静态力学性能的影响。
The influence of the dimension of hard bead filler on the static mechanical properties of tire was investigated by FEA.
本文将神经网络理论用于对利用有限元分析方法得到的系统模型进行修正。
In this paper, the model of the system established by the Finite Element Method will be updated by BP Neural Network theory.
用三维弹塑性有限元分析方法，全面分析了点焊搭接接头的应力分布情况。
Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.
目前，筏板基础的研究手段主要有：原型试验、模型试验和有限元分析方法。
At the present time, the researching methods for the raft foundation mainly contain prototype foundation testing, model test and finite element analysis.
本文研究了加劲壳的非线性有限元分析方法，提出了一种梁元素来模拟加筋。
The paper studies nonlinear F. E. analysis of stiffened shells, presenting beam element to simulate the stiffeners.
从本文实例中可以看出，有限元分析方法对提高锻造工艺设计水平具有显著作用。
It has been shown that finite element simulation can improve the forging process design level greatly.
以随机物理参数板梁组合结构为对象，研究了其在随机力作用下的有限元分析方法。
The finite element analysis methods for plate-beam composite structures with random physical parameters under the random loads action are studied.
首次采用有限元分析方法对靖边气田典型性腐蚀缺陷管道及设备进行了安全性评价。
Safety evaluation were carried out on the typical corrosion defect of Pipelines and facilities by finite element analysis method in Jingbian gas field for the first time.
基于滑面上应力分析法和强度折减法是边坡稳定有限元分析方法中两类主要的方法。
Stability method based on slip surface FE stress and shear strength reduction method are two principal methods for FEM slope stability analysis.
通过有限元分析方法模拟简单剪切橡胶件粘结处裂纹扩展时撕裂能与裂纹尺寸的关系。
The variation of tearing energy with crack size was calculated for the bonded crack of simple shear rubber using non-linear finite element analysis.
介绍了双向组合楼盖的有限元分析方法、试验、施工、节点构造以及现场实测挠度结果。
The finite element analysis method, the test, the construction, the joint connection and the actual deflection dat.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Considering characteristics of grotto relics the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Considering characteristics of grotto Relics, the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
采用角度细分逐次迭代的有限元分析方法解决了特殊圆弧三角形部件应力和位移分布问题。
In this paper, the distribution of stress and displacement of the special arc triangle components is solved by using the Angle division iteration method of finite element analysis.
应用有限元分析方法对步进型精密直线驱动器进行了力学分析，并进行了大量的试验研究。
Mechanical properties of the stepping linear sophisticated piezoelectric actuator are analysed with finite element method and a number of experiments were carried out.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
在分析挤胀波纹管受力的基础上，采用大变形弹塑有限元分析方法，结合实际数据进行计算。
On the basis of analyzing the force exerted on corrugated pipe, by means of the deforming finite element method, this paper conducts calculation by use of actual data.
在有限元分析方法基础上，基于稳定特征方程对随机参数压电桁架结构进行稳定可靠性分析。
The problem of achieving stable reliability analysis of piezoelectric trusses with random parameters was studied on the basis of the finite element analysis method and stable secular equation.
为了测斜仪技术检验监测结果的准确性，采用有限元分析方法计算静压桩与土的相互作用效果。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
为了测斜仪技术检验监测结果的准确性，采用有限元分析方法计算静压桩与土的相互作用效果。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
应用推荐