应用有限元分析软件，对花键轴的齿形成形过程进行模拟。
The thesis simulates the process of the spline forming by the FEM software.
计算结果表明，用有限元分析软件解决工程实际问题是可行的。
The result indicates that solving engineering problem with FEM software is feasible.
并利用有限元分析软件Ansys进行辅助设计，对其结构进行优化。
Furthermore, the fixture structure is optimized by using the finite element analysis software ANSYS.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
运用有限元分析软件对盘式永磁同步发电机的空载静态磁场进行了分析。
Analysed this generator's unload static magnetic field by the software of FEA.
同时，提出了CAD造型软件与有限元分析软件相结合解决工程实际问题的方法。
Furthermore, a new method that combines CAD modeling software and finite analysis software to solve the engineering questions is set forth in the article.
为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。
This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.
文章利用ANSYS有限元分析软件，对螺旋布孔射孔套管的承载能力进行了分析。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
利用有限元分析软件ANSYS计算数控镗铣钻床主轴的静态变形与一阶固有频率。
Utilizing ANSYS, the static deformation and natural frequency for the spindle of the nc boring-milling machine are analyzed.
本文利用有限元分析软件LS - DYNA对金属板料渐进成形的过程进行了模拟。
In this thesis, by using FEM software-LS-DYNA, we simulate the process of sheet metal Incremental Forming.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
利用有限元分析软件ANSYS对新型铜-铝-铜三层复合板内部涡流场进行模拟计算。
The eddy current fields in three-layer copper and aluminum composite plates were analyzed using the software ANSYS.
应用有限元分析软件ANSYS，模拟功率载荷下叠层芯片封装中各层的温度和应力分布。
The finite element analysis (FET) software ANSYS have been used to simulate the temperature and stress distribution in stacked die package under power load.
采用ANSYS有限元分析软件对胎面双复合挤出机头流道内部的压力场进行模拟和分析。
The simulation and analysis of the pressure distribution in head runner of double plex tread extruder were made with ANSYS FEA software.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限元分析软件，对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布，并与均匀涂层进行了比较。
The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
应用有限元分析软件ANSYS计算了1045钢淬火时具有相变和非线性表面换热系数的温度场。
The temperature field with phase transformation and non-linear surface heat-transfer coefficient of steel 1045 during quenching is calculated with ANSYS program.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
结合工程实例，采用ANSYS有限元分析软件对某斜腿刚构桥在悬臂施工及运营阶段的屈曲特性进行分析。
This paper adopting finite element analysis software ANSYS to analyze the buckling property of slant-legged rigid-frame bridge in cantilever construction stage and service phase.
结合工程实例，采用ANSYS有限元分析软件对某斜腿刚构桥在悬臂施工及运营阶段的屈曲特性进行分析。
This paper adopting finite element analysis software ANSYS to analyze the buckling property of slant-legged rigid-frame bridge in cantilever construction stage and service phase.
应用推荐