分析了影响纠偏控制系统纠偏精度的主要环节和关键因素。
The key elements and factors influencing the guide accuracy in a web guide system were analyzed.
简述了由单片微机控制的经济型多层复合机的自动纠偏控制系统。
This article gives a brief recount of the automatic deviation-rectifying control system of economic-type multilayer complex machine controlled by single micro-computer.
本实用新型成本低，效率高，纠偏控制信号连续，抗干扰能力强。
The utility model has the advantages of low cost, high efficiency, continuous offset correcting control signals and strong anti-interference capability.
介绍了一种新型的微机纠偏控制系统，介绍了系统功能、硬件构成和软件构成。
This paper describes a new type of strip deviation rectification system controled by single chip microcomputer. The system function, hardware and software structure are presented.
实例设计表明，滑跑纠偏控制方案和控制结构合理可行，控制律设计方法快捷有效。
The illustration for X-UAV verifies the validity of the scheme and structure of lateral deviation control, and shows the efficiency of the design procedure of control law.
电感式纠偏检测方法以其独特的优点已广泛应用于各种导磁性带钢纠偏控制系统中。
Inductive measurement method has been widely used in strip guiding system due to its particular advantage.
最后，通过在光电纠偏控制器上的实际应用及其实测的控制过程曲线证明了其实用性。
In the end of the paper, practicality of the method and photoelectric controller that is devel- oped by the method and used in rec…
本文针对造纸机的卷取跑偏问题，提出一种具有超前控制规律的电液伺服纠偏控制系统。
A electrohydraulic servo rectify deviation control system, which possesses derivative control law for the web deviation on the winder of paper making machine, is proposed.
本文介绍一种采用多调整因子模糊控制方法实现的新型多功能全自动光电分条机纠偏控制系统。
A new multi - function and automatic control system for photoelectric slitter is introduced. The sys - tem is implemented by means of fuzzy control with multi - regulating factors.
采用规则自调整模糊控制器进行焊缝纠偏控制，以克服常规模糊控制器的不足，使其具有良好性能。
Use rule auto-adjusting fuzzy controller for the correction of welding path deviation to conquer the shortage of general fuzzy controller and make the system having perfect capability.
系统能很快适应起重机运行状况的变化，对参数和负载变化有较强的适应性，保持了良好的纠偏控制性能。
The control system can keep the crane operating organization straightening by adapt commendably to the change of the crane operating organization and the change of parameters and the load.
采用荆门导轨控制刀具调节，令刀具调节轻松简便，有自动计数及自动纠偏等功能。
Precise track to control the adjust of blades is much more easier. Have automatic meter counting and automatic rectification functions.
本课题研究对象是彩色套印及制袋分切系统的自动控制，内容主要是纠偏系统与加工的协调控制。
The object of this study is controlling automatically for color printing and making bags by cutting, the main content is to correct the excursion and to control processing in phase.
该纠偏机的特点是控制系统简单，只有一级运算放大器和一级功率放大器，故障机遇少，维修极为方便。
The correction character of this machine is simple for its controlling system. It has only one grade calculating amplifer, one grade power complifer, and so less accidents and easy maintenance.
该机具有光电自动跟踪、纠偏、磁粉制动器和离合器控制张力，自动计数和预置计数等功能。
This machine has many functions of photo - electricity auto tracking, deviation , magnetic powder brake and clutch to control tension, as well as auto, count and preset count etc.
该机具有光电自动跟踪、纠偏、磁粉制动器和离合器控制张力，自动计数和预置计数等功能。
This machine has many functions of photo - electricity auto tracking, deviation, magnetic powder brake and clutch to control tension, as well as auto, count and preset count etc.
介绍岩滩水电站大坝倒垂线观测系统的倒垂线孔钻孔的孔斜控制、孔斜测量、孔斜纠偏等施工技术及廊道内遇长岩芯的处理方法。
This paper introduced construction technique of the inverted vertical line survey system, boring, hole slope measuring, slope correcting, etc. of the Yantan hydropower station.
文章介绍了钢板沉井的施工方法及顶管过程中的测量控制和纠偏措施。
This paper describes construction method of steel open caisson as well as measurement control and measure of rectifying deviation.
本文根据已经建立的数学模型探讨了十吨级龙门吊起升定位系统及自动纠偏系统的控制策略。
This paper has been discussed 10-ton gantry crane hoist positioning system and automatic correction system of control strategies based on the mathematical model.
执行机构由伺服控制装置推动纠偏辊进行纠偏。
The executing system pushes the roller by servocontrol device to rectify deviation.
该系统是由单片微机将传感器获得的检测信号进行转换、分析、处理，控制低速同步电机以实现自动纠偏。
It achieves in the way that the single micro-computer transforms, analyzes and processes the signals received from sensor, controls the low-velocity synchronous electrical machine.
本课题的研究目标是设计出精度高、纠偏速度快、自适应性强、能动态显示加工状况并具备良好稳定性的智能化彩印制袋控制系统。
The target is to design a intellective color printing and cutting system with high precision, work quickly, well self-adaptability, dynamic showing the work state and having good stability as well.
详细分析了掘进模式、土压力选择、壁后注浆、盾构纠偏等施工控制手段，用来减小盾构施工对周边环境的影响。
Such as operation program, selection of earth pressure, wall-back grouting, rectification of shield machine, which are used to reduce the effect of construction on environment, are analyzed in detail.
带料纠偏试验结果已经证明了FNN预测控制的有效性。
The experimental results of tape rectification have shown the effectiveness of the FNN predictive control.
带料纠偏试验结果已经证明了FNN预测控制的有效性。
The experimental results of tape rectification have shown the effectiveness of the FNN predictive control.
应用推荐