泰斯拉跑车大量采用了碳纤维复合材料。
The Tesla Roadster makes significant use of carbon fiber composite materials.
本文对影响碳纤维复合材料性能的有关因素作了探讨。
In this paper, the factors affecting the properties of CFRP discussed in detail.
为采用快速成形方法制造连续纤维复合材料件进行的探索。
The process that makes the continuous fiber reinforced composite by RPM (Rapid-Prototyping and Manufacturing) process is investigated.
讨论了混杂纤维复合材料体积含量和质量含量的定义和作用；
The definition and function of the volume fraction and mass fraction for the hybrid fiber composite material was approached.
同时总结了大尺寸、轻质碳纤维复合材料天线一些设计经验。
At last, the author give some advice about how to design the light composite material antenna.
纤维复合材料的制造者往往旋转纤维层以防模量产生方向变化。
Fiber composite manufacturers often rotate layers of fibers to avoid directional variations in the modulus.
指出单一纤维复合材料(FRP)加固混凝土存在的若干问题。
Some problems existed in single type of fiber reinforced polymer (FRP) used for strengthening concrete are pointed out.
本文研究了混杂纤维复合材料参数设计与材料力学性能的关系。
The relationship between parameter design and mechanical properties of hybrid fiber composite materials is investigated.
介绍了碳纤维复合材料天线采用转移法进行表面金属化的技术。
This paper describes the technology of the carbon fiber antenna metalizing by transfer.
纤维复合材料的力学特性很大程度上依赖于纤维和基体的应力传递。
Mechanical propertys of fiber composites largely depend on stress transfer of fiber and matrix.
目前在俄罗斯制造的飞机中，碳纤维复合材料所占比例超过20%。
Now the proportion of carbon fiber parts in aircraft produced in Russia does not exceed 20 percent.
碳纤维复合材料的孔壁表面微观形态是孔加工质量的重要特征之一。
The microstructure on the hole surface of CFRP is a very important characteristic of the quality of hole drilling.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
本文介绍了天然纤维复合材料在国内外汽车工业上的应用现状及发展趋势。
The paper describes the application status and future trend of natural fiber composites in domestic and international auto industry.
颗粒复合材料具有各向同性、成本低等特点，对纤维复合材料是一种补充。
Particle composite is of isotropy and low cost, it is supplement to fiber composites.
主要论述制备碳纤维复合材料的先进工艺及碳纤维复合材料的应用新领域。
The paper introduces mainly the advanced preparation technology of carbon fiber composites and their new application areas.
波丽是一种玻璃纤维复合材料，波丽电镀制品在建筑装饰中的应用日渐广泛。
Polystone is a kind of glass fibre reinforced composite. Electroplated polystone articles are now increasingly used in architectural decoration.
研究由平头压痕蠕变试验来确定纤维复合材料界面影响区蠕变性能参数的可行性。
This paper discusses the possibility of determining the creep parameters oon the interlayer zone of reinforced composites by indentation test method.
由于碳纤维复合材料刚性好、脆性大，因而给装配工作带来了新的技术问题和困难。
High rigidity and brittleness of carbon-fibre composite bring new technical problems and difficulties in assembling.
以硅橡胶材料制作的芯模与钢模组合使用制备碳纤维复合材料制件，应用效果较好。
The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.
这种细长梁由质轻但坚韧的碳纤维复合材料制成，负责承载引擎、起落架和机翼结构。
The long, slender beams that carry engines, landing gear and wing structure are made from light but tough carbon-fibre composites.
粘贴钢板或其他纤维复合材料对梁的受拉薄弱区进行补强是桥梁加固的主要方式之一。
It is one of the main methods in bridge reinforcement that bonding steel plate or other fiber compound material is used to strengthen load-carrying capacity of weak member of Bridges.
采用空间回路网法计算得到填充吸波泡沫的碳纤维复合材料格栅结构的电磁散射性能。
The spatial network method is used to calculate the electromagnetic wave scattering characteristic of carbon fiber composite grid structures filled with Absorbing foams.
针对双频副反射器的结构特点和技术要求，研究了混杂纤维复合材料的性能和成型工艺。
According to structural features and technical requirements of the dual-frequency subreflector, the performance and shaping process technology of hybrid fibre composite are studied.
碳纤维复合材料管子是复合材料结构的基本元件，扭转变形是结构常见的基本变形形式。
Pipe of carbon composites is one of the basic components in composites structure, and torque deformation is one of the basic forms of the structure.
本文综述了聚合物基纤维复合材料界面残余应力的形成、测定方法和各种理论分析方法。
In this paper, an overview of the formation, determination and various theoretical analysis methods of residual stress at the fiber - polymer interface is presented.
文中以裂纹连续扩展的断裂力学方法，研究单向纤维复合材料的细观损伤演化与韧度计算。
The methodology of fracture mechanics based on continuous crack growth was applied to the investigation of the microscopic damage evolution and toughness calculation for fiber composites.
本文综述了聚合物基纤维复合材料界面残余热应力的形成、测定方法和各种理论分析方法。
In this paper an overview of the formation, determination and various theoretical analysis methods of residual stress on the fiber-polymer interface is presented.
本文综述了聚合物基纤维复合材料界面残余热应力的形成、测定方法和各种理论分析方法。
In this paper an overview of the formation, determination and various theoretical analysis methods of residual stress on the fiber-polymer interface is presented.
应用推荐