介绍了两种线切割夹具的特点。
Introduced the characteristics of two kinds of wire cut clamps.
线切割等专业技术和多年工作经验。
磨床，铣床，车床，线切割等机械加工。
Grinders, milling machines, lathes, wire cutting, and other mechanical processing.
现在用手术刀依照之前所画的线切割表皮。
The skin is now incised with the scalpel along the previously-drawn lines.
对四轴联动数控线切割加工进行轨迹合成研究。
The paper studies the profile synthesis in the four axes simultaneous control wire EDM.
简述了线切割的加工原理、编程过程及3b代码。
The programming steps, together with 3b code, were also referred to.
看不见的射线切割翻转着我的内脏，找有没有金属。
The invisible rays sliced and diced my entrails in search of metal.
慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。
Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.
方法96例消化道重建手术运用管状吻合器及直线切割缝合器。
Methods In 96 cases undergoing surgical reconstruction of digestive tract, anastomat and stapler were used.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
与生产车间相关的涂层，热处理，线切割，刻字等供应商的联系事宜。
To contact the suppliers with the coating, heat treatment, cutting, marking processes related with production.
因此该系统的推广应用对普遍提高线切割的使用水平有重要的意义。
So that, the wide application of this system has important significance to widely rise the WEDM operating level.
线切割存在加工效率低、加工成本高、兜孔表面光度不理想等缺点。
This way exist the feature of a low production rate and surface finish and high cost.
为此，公司计划购置高速冲床、模具加工中心、线切割等工装加工设备。
Therefore, the Company plans to add some advanced equipments like high-speed stamping machine, mold processing, wire cutting.
主要介绍了当前慢走丝电火花线切割脉冲电源的研究现状和新的发展趋势。
The paper introduces the research status and the new trend in development of pulse generator for LSWEDM.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
本文进行了电加工中的磁力电解抛光和干式电火花线切割两方面内容的研究。
WE study two areas of the electro-machining: the magnetic force electrolysis polishing and the dry-type WEDM.
用光学显微镜观测和分析电火花线切割硅表面沿纵向分层择优腐蚀后的形貌；
The surface morphology after preferential corrosion along the vertical orientation was observed via an optical microscope.
在此基础上，用水平射线切割有向环所形成的出入点对，实现对区域的填充。
Horizontal rays are used to cut the loops to form pairs of in points and out points, thus realizing the filling of region.
以一个椭圆齿轮为例，进行设计和线切割加工，得到由图形所确定的齿轮轮廓。
As an example, an elliptical gear was designed and processed in the linear cutting machine, the gear contour determined by graphics was obtained.
气中电火花线切割加工技术是近几年出现的一种新技术，它采用气体作为介质。
WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.
研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
可实现在计算机上模拟显示线切割加工轨迹，从而可验证所编3B程序的正确性等。
Which can be used to display the cutting path of WEDM, so that the 3B mode program can be verified.
金属电化学线切割加工技术是利用电化学加工原理进行金属切割的一种新加工工艺。
Metal wire cut electrochemical machining (MWEM) technology is a new metal cutting machining method that based on the principles of electrochemical machining.
探讨在电火花线切割得到广泛应用的背景下，电火花线切割数控编程的手段和方法。
The article discusses the means and method of numerical control programming under the background that spark erosion wire cutting is applied extensively.
方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点，始终采用线切割加工方兜孔。
The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.
本品配成的乳化液具有较小的导电率用于线切割加工不易断丝，能保证加工正常进行。
This product is prepared from emulsion with smaller conductivity for wire cutting is not easy to break the wire processing, can guarantee the normal.
电火花线切割加工精度，主要指尺寸精度、形状精度、位置精度以及加工表面粗糙度。
The machining accuracy of WEDM means mainly the dimensional accuracy, accuracy of form, accuracy of position, and the surface roughness of cut surfaces.
介绍了基于细化算法的位图矢量化技术，使得自动排料与线切割系统能够运用于制鞋工业。
This paper proposes a bitmap vectorization technique based on a thinning algorithm, which makes the layout automation and wire-cutting machine applicable to the shoes manufacturing.
而国产或引进的线切割数控编程软件也分别存在技术滞后、操作不便和通用性不好等缺陷。
On the other hand, the CNC software made in China for WEDM has defects of tech hysteresis and inconvenience, and the import software has poor universality and is hard to use.
应用推荐