探讨了聚酰胺树脂对荷叶碱的吸附和洗脱工艺。
The technics of adsorption and elution of nuciferine with polyamide resins as adsorbent was studied.
聚酰胺树脂以其固化的环氧树脂具有柔韧性而被广泛应用。
Polyamides were widely used due to the flexibility of cross-linked polymers of epoxy resin cured with them.
15%玻璃纤维增强，热稳定，增韧，抗水解高性能聚酰胺树脂。
Glass reinforced, heat stabilized, toughened, hydrolysis resistant high performance polyamide resin.
其中工业油酸、二聚酸和聚酰胺树脂三大主导产品产销量均居中国行业之首。
Among them, the production and sales quantities of its three leading products of industrial oleic acid, dimer acid and polyamide resin take the lead in the national industries.
公司位于深圳龙岗，是全国最大的脂肪酸及二聚酸、聚酰胺树脂生产企业之一。
Company is located in Longgang, Shenzhen, is the country's largest fatty acid and 2-acid, one of polyamide resin manufacturing enterprises.
比较了五种大孔吸附树脂和聚酰胺树脂对阿尔泰狗哇花总皂苷的吸附与脱附性能。
The technics of adsorption and elution of nuciferine with polyamide resins as adsorbent was studied.
用本体聚合的方法，通过化学改性，使低分子二聚酸聚酰胺树脂的性能得到大幅度提高。
The properties of low molecule dimeric dibasic acid polyamide resin were improved by chemical modified in mass polymerization.
介绍了由二聚酸与二元胺为主要原料生产的聚酰胺树脂用于油墨的条件、国内外情况及发展趋势。
This paper introduces the requirements of polyamide resins derived by dimer acids and diamines as primary raw, ap-plied printing ink and the situation at home and abroad and the trend of development.
在静态下，考察了温度对聚酰胺树脂吸附水溶液中苦味酸的影响，探讨了吸附的热力学、动力学规律。
The thermodynamics and dynamics for adsorption of picric acid onto polyamide under static conditions were studied and the influence of temperature on the adsorption was also inspected.
该法简便、快速、灵敏且结果准确，可以作为聚酰胺树脂合成中控制其产品质量的主要质量中控方法。
This method was simple, quick, sensitive and accurate and useful for product quality control of polyamide resin synthesis.
应用溶解度参数理论，通过对环氧树脂、聚酰胺树脂均相溶液适当混合，研制出综合性能优良的溶剂型环氧-聚酰胺清漆。
With the solubility parameter theory and a proper mix of epoxy and polyamide resins, a solvent-based epoxy-polyamide varnish having excellent overall properties has been prepared.
在低分子聚酰胺树脂固化环氧树脂的体系中 ，通过添加一定量的酚醛胺固化剂 ，直接影响该体系的表观及固化物力学性能。
The aperance and the mechanic properties of epoxy resin and low molecular polyamide adhesive system would be affected by the addition of mannich amide.
本产品主要用于聚乙烯、聚酰胺、聚酯、聚氯乙烯、ABS树脂一级各种合成橡胶和石油产品中，对聚丙烯有卓效。
This product mainly used in polyethylene, polyamide, polyester, polyvinyl chloride, ABS resin and all kinds of synthetic rubber and petroleum products, is highly effective to polypropylene.
超级强韧，高性能，聚酰胺66树脂。这是部分紫外线稳定和适当的颜色时，提供有限的保护，以间接阳光照射。
Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure.
超级强韧，高性能聚酰胺66树脂。它提供了出色的成型注塑成型应用的性能。
Super Tough, high performance polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
两种最重要的合成聚酰胺是脲甲醛树脂和各种形式的尼龙。
The two most important synthetic polyamides are the urea-formaldehyde resins and the various forms of nylon.
热稳定，自润滑聚酰胺66树脂注塑。它是为快速周期和高效率。
Heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
通过宏观试验和AFM微观分析证明，改性酚醛胺固化环氧树脂体系的耐蒸馏水性能，优于低分子聚酰胺固化的环氧树脂体系。
The distilled water resistance of this system is better than low molecular weight polyamide cured epoxy resin system. This is proved by macroscopic examination and microcosmic AFM analysis.
它们通常同热塑性树脂如eva、EEA、聚乙烯、聚酰胺、聚酯等掺合。
They are often the same thermoplastic resin such as EVA, EEA, polyethylene, polyamide, polyester and other admixtures.
该破乳剂由酚胺树脂聚醚和聚酰胺-季铵盐两种组分组成。
Demulsifier TKQ comprises of phenol-amine resin block polyethers and quaternized polyamidoamine.
本实验采用环氧树脂、有机仲胺、聚酰胺和封闭异氰酸酯为主要原料，合成了固体分在70%的阳离子型环氧聚合物树脂；
An epoxy resin, an organic secondary amine, a polyamide and a blocked isocyanate are selected as main materials to synthesize polymer resin with solid content of 70%.
还公开了一种由这种聚酰胺类导电树脂组合物组成的燃料箱盖。
Also disclosed is a fuel tank cap composed of such a conductive polyamide resin composition.
以液体聚硫聚脲齐聚物来增韧环氧-聚酰胺体系，用DMTA和SEM研究了固化后环氧树脂的形态结构、相分离程度和增韧效果。
The measurement of DMTA and SEM was used to study the morphology and structure of the cured epoxy, identifying the degree of phase segregation and the effect of toughening in the cured epoxy.
方法：建立猕猴桃根多糖的含量测定方法，以脱色率为指标，采用单因素试验法，通过优化与比较聚酰胺和DA201型大孔吸附树脂对猕猴桃根粗多糖的脱色作用。
Methods:To determine RACP by HPLC; The index is decolorate rate and haplo-factor method is adopted through comparing and optimizing the polyamide with DA201 gum on the decolorization of RACP.
本文叙述的水性环氧树脂涂料是以环氧树脂为主体、水为分散剂、改性聚酰胺为固化剂的双组分涂料。
The so described water-base epoxy resin coating is a two-components coating with epoxy resin as the main component, modified polyamide as curing agent and water as dispersion medium.
最近对热塑性弹性体产品家族总体增长贡献最大的是商品名为PEBAX的嵌段聚醚酰胺树脂。PEBAX树脂结构由规则的线性聚酰胺链段嵌由柔软的聚醚链段构成。
Recently , a kind of block polyether acidamide resin with the trade name of PEBAX has made the greatest contribution to the general improvement of thermal - plastic elastomer family.
最近对热塑性弹性体产品家族总体增长贡献最大的是商品名为PEBAX的嵌段聚醚酰胺树脂。PEBAX树脂结构由规则的线性聚酰胺链段嵌由柔软的聚醚链段构成。
Recently , a kind of block polyether acidamide resin with the trade name of PEBAX has made the greatest contribution to the general improvement of thermal - plastic elastomer family.
应用推荐