采用FLUENT计算流体力学软件对糖化锅内的流场进行了模拟。
The inside field of the mash kettle is imitated with FLUENT software.
采用计算流体力学软件CFX对超临界水冷堆主容器出口管的温度分布进行数值分析。
The numerical analysis was performed on temperature distribution of the outlet nozzles in main vessel of SCWR(supercritical water reactor) by using computational fluid dynamics software CFX.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。
The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.
本文使用计算流体力学软件FLUENT对二维平面上转子对壁面液膜的刮擦过程进行模拟。
Thirdly, CFD software FLUENT was applied to simulate the wiping process by rotor on the evaporating wall in two-dimension plane.
建立了顺序输送高差混油模型，通过计算流体力学软件PHOENI CS对它进行了模拟。
An intermixing model of elevation difference batching transportation is established. A numerical simulation is conduced on it by using PHOENICS.
利用计算流体力学软件对煤油在所设计的双模态超声速燃烧室内的超声速喷雾燃烧进行了数值模拟。
Numerical analysis of the kerosene spray supersonic combustion was carried out in the dual-mode supersonic combustor with the CFD software.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
为了预报毂帽鳍的水动力性能，采用计算流体力学软件对粘性流场中毂帽鳍的敞水性能进行计算研究。
In order to predict the hydrodynamic performance of propeller with boss cap fins, CFD software was used to calculate the its open water performance.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
以现场数据为基础，利用计算流体力学软件FLUENT6.3为计算平台对焙烧炉进行了数值模拟研究。
Based on the field data, numerical simulation of the baking furnace is carried out using computational fluid dynamics software FLUENT6.3 for the computing platform.
基于经典波浪理论，以大型商业计算流体力学软件CFX为平台，可以实现数值造波及波物作用的模拟计算。
Based on the principle of wave, the simulation of wave generator and wave or wave-current forces on circular cylinder is presented by using CFX.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
在解决电池问题上，工程师们可以采用ANSYS的先进的计算流体力学软件FLUENT去检查电化学，研发先进的电池冷却方案。
In resolving battery problems, engineers apply the advanced CFD technology of ANSYS FLUENT software to examine electrochemistry and to develop advanced battery cooling solutions.
采用零方程模型和3点动量风口模型，应用计算流体力学软件PHOENICS模拟了某候机厅空调气流组织方案的速度场和温度场。
Simulates the air distribution in an air conditioned airport ball by PHOENICS using zero equation turbulent model and three point momentum draught model.
本文联合使用计算流体力学软件FLUENT和可以计算表面反应的化学反应动力学软件DETCHEM对有逆流换热的微尺度燃烧器进行了数值计算。
In this paper was preformed numerical simulation for micro-scale combustor with counterflow heat exchanger using both CFD FLUENT and surface chemistry subroutine DETCHEM.
本文用计算流体力学软件FLUENT6.2对燕山石化公司E-BA - 107乙烯裂解炉辐射段内的燃烧和裂解反应做了三维数值模拟研究。
In this paper three-dimensional combustion and pyrolysis reactions in the firebox of E-BA-107 ethylene cracking furnace of Yanshan Petrochemical Corporation were simulated by CFD software FLUENT6.2.
使用计算流体力学软件FLUENT，模拟均匀来流绕固定圆柱的流动，模拟雷诺数为20,40,100时的绕流流动，得到流场的流函数等值线图和速度矢量图。
Uniform flow around a mounting cylinder is simulated with the application of FLUENT software while Reynolds number is 20, 40,100. Stream function and velocity vector distributions are indicated.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
本文介绍了计算流体力学(CFD)以及CFX应用软件的特有模块、包含的数学模型和成功应用领域。
This paper describes the Computational Fluid Dynamics (CFD) and CFX software, as well as discusser it's special modules, mathematical models and successful application areas.
首先，本文说明了研制网格生成软件对于促进计算流体力学研究和应用的重要意义。
First, this paper shows that grid generation software has important significance for the research and application of computational fluid dynamics.
利用计算流体力学通用软件FLUENT对整体流场和定转子间隙区流场中周向流速度场进行了数值模拟，并对理论分析进行了补充。
The field of whole flow field and tangential velocity between stator and rotor were imitated based on FLUENT. The analysis in theory was replenished.
一款管道流体力学三维分析软件。支持点对点的压降计算。
Pipe Flow 3D is a professional tool that calculates pressure losses in single supply pipe work systems with known non-compressible fluid flows.
一款管道流体力学三维分析软件。支持点对点的压降计算。
Pipe Flow 3D is a professional tool that calculates pressure losses in single supply pipe work systems with known non-compressible fluid flows.
应用推荐