引入了焊缝超声波探伤的一般程序。
This paper introduces and discusses a supersonic flaw detection method.
焊缝均匀整齐密实，焊缝用超声波探伤。
研究汽轮机低压转子焊缝狭窄部位超声波探伤工艺。
Ultrasonic inspection technology for the narrow section of a weld in low-pressure rotor of steam turbine is studied.
介绍了日本原有超声波探伤设备存在的问题及改进措施。
The problems existing in the original supersonic flaw detection equipment has in Japan and the improvement measures are described.
在一定的尺寸范围内，通过超声波探伤可检测到此类缺陷。
From a certain size, defects of this type can be detected by ultrasonic inspection before delivery.
在超声波探伤信号耦合的理论和方法上，填补了国内空白。
The theory and method of ultrasonic inspection signal coupling have filled the country blank.
当吊卡主要承载零件为锻件时，必须进行超声波探伤检测。
If the main load parts of elevators are forged, it must be detected by ultrasonic method.
指出对空间钢网架球管焊缝进行超声波探伤，检测结果表明；
This text deals with ultrasonic detection of welding seams on ball and tube of space frame.
本实用新型提供一种高压支柱瓷绝缘子超声波探伤对比试块。
The utility model provides an ultrasonic fault detection comparing test block for a high-voltage pillar porcelain insulator, consisting of a test block body and arc grooves.
从理论和实践两方面探讨了薄板焊缝超声波探伤探头的选择方法。
The probe choices for ultrasonic crack detection of welding line of light sheet are discussed from two aspects of theory and practice.
本系统实现了车轮、轮箍两条超声波探伤生产线智能化检测功能。
The system realized intelligent inspection function of the wheel and ring ultrasonic testing in two on-lines.
通过对在役风机叶柄断裂原因的分析，给出了超声波探伤的方法。
The paper anslyses reason of fan blade handle and gives out methods of ultrasonic flaw detection.
超声波探伤中的缺陷精确定位问题是超声波探伤的主要任务之一。
Accurate flaw positioning is one of the important tasks of ultrasonic flaw detecting.
供货方应向用户提交一份涡流与超声波探伤规程，并要得到订购方认可。
The supplier shall furnish the Eddy Current and Ultrasonic Test Procedure to the purchaser for approved.
本实用新型涉及一种超声波探伤专用试块，涉及超声波探伤技术领域。
The utility model relates to a special test block for ultrasonic flaw detection, which belongs to the technical field of the ultrasonic flaw detection.
分析了汽轮机厚断面球铁件轴承座的设计特点、铸造技术和超声波探伤。
The design characteristics, foundry technology and ultrasonic test method of heavy section ductile iron bearings for steam turbines was described and analyzed.
本发明提供了一种超声波探伤专用斜探头，涉及超声波探伤技术领域。
The invention provides a special ultrasonic flaw detection angle probe, relating to the ultrasonic flaw detection technical field.
焊缝须进行超声波探伤检查并清除缺陷，焊后对焊缝余高进行铲除并磨平。
Ultrasonic defect detection inspection shall be carried out for welding seams and defects shall be removed. the excess weld metal of welding seam must be eradicated and abraded after welding.
应用声散射原理描述了钛合金中方形轮廓线低倍组织对超声波探伤的影响。
Effect of "square line" structure of titanium alloys on ultrasonic testing is analysed by the principle of sound scattering.
在高温状态下，超声波探伤实施的关键在于声耦合、声衰减和声路径的控制。
The linchpin of undertaking high temperature ultrasonic testing is the control of the coupling, attenuation and route of the sound.
介绍了全焊透t型角焊缝超声波探伤的两种方法：单直探头法和单斜探头法。
Two methods for ultrasonic flaw detection of T-fillet welds with complete fusion are presented, i. e. Single straight probe and single tilting probe techniques.
超声波探伤技术是超声波特性与现代电子技术以及微电脑技术相结合的产物。
Ultrasonic flaw detection technology combines the characteristic of ultrasonic with modern electronic technology as well as microcomputer technology.
本文分析了超声波探伤纵波检测的误差来源，评定了在探伤过程中的不确定度。
This paper deduces the errors sources from the process of ultrasonic longitudinal wave testing and evaluates its uncertainty.
在回顾机车车轴超声波探伤方法的基础上，分析了超声波探伤的工艺参数选择。
Based on the reviewing of the method of ultrasonic detection for locomotive axle, the choice of process parameters of ultrasonic detection was analyzed.
介绍t 91钢小径管焊接接头的超声波探伤工艺，并就工艺的可行性进行探讨。
This paper introduces the ultrasonic inspection technics in the butt welded-joints of T91 small diameter tubes, and discusses its technical feasibility.
结合检测实践，对螺栓球网架焊缝超声波探伤技术应用中的若干问题进行了探讨。
Problems in ultrasonic inspection of the welds in the steel space grid structures with bolted joints are analyzed in combination with practical inspection.
在焊缝超声波探伤中应用断裂力学分析缺陷危害程度，以提高探伤结果的可靠性。
Fracture mechanics has been applied for harmfulness analysis of flaws in ultrasonic testing of welds in order to improve the reliability of testing results.
主要介绍超声波探伤设备中，以单片机为核心实现超声波探伤中的声程补偿问题。
This paper introduces the chip microprocessor achieves the problem of compensation for acoustic distance of the ultrasonic flaw detection in the ultrasonic flaw detection device.
探讨了斜面焊接接头超声波探伤中缺陷定位的方法，可供现场施工实际探伤时采用。
This paper introduces the method to the defect location in the scarf welding joint by ultrasonic test, which can be adopted in the construction site.
探讨了斜面焊接接头超声波探伤中缺陷定位的方法，可供现场施工实际探伤时采用。
This paper introduces the method to the defect location in the scarf welding joint by ultrasonic test, which can be adopted in the construction site.
应用推荐