而且传送精度较高，减少了人为误差。
In addition, the conveyance precision is high, and the personal error is reduced.
消除了人为误差，因此测量分辨率大大提高。
The artificial error is avoided, thus greatly improve the measurement resolution.
这些是由人为误差或者故意导致的误差类型。
These are the types of errors caused by human error or fraud.
它使数据的测量和分析实现自动化，从而减少人为误差。
It can make the measurement and analysis of date automated that can reduce human error.
该方法可实现对行车的实时测量，还能避免人为误差。
This method can not only offer an on-line monitor for crane, but also avoids artificial errors.
传统的袋装化肥计数系统，存在漏计和人为误差的问题。
Wrong counts of fertilizer pokes sometimes occurs in old fertilizer poke count system.
这意味着，虽然车辆可以驾驶，人为误差的幅度可以从方程。
This means that though the vehicle can be piloted, a significant margin of human error can be removed from the equation.
尺寸检测条件：依据图纸，使用计量卡尺，注意检测人为误差。
Size check condition: Use the measure ruler based on the product drawing for check, and need note that the tolerance make by operator.
测井数据误差来源归纳起来有四种：方法误差、环境误差、装置误差和人为误差。
There are four kinds of error sources for logging data: method error, environment error, instrument error and error caused by negligence of operators.
针对传统手工校准频谱分析仪存在校准时间久、效率低、容易引入人为误差等问题。
For the problem of the traditional manual calibration spectrum analyzer calibration need long time, low efficiency, easy to introduce human error.
但成像干板的判读系统也存在着许多问题，判读效率低、人为误差大、处理周期长。
But there are also some problems about the photo-plate image reading system such as low precision, big artificial error, long processing period, ect.
自动化测试系统方法能提高测试效率，减少人为误差和人为因数，规范测试方法和标准。
Online auto-testing can improve the efficiency, reduce artificial transmutation and standardize the testing methods.
提出了DRAM逻辑的激励波形生成等算法，减少了逻辑参数提取过程中引入的人为误差。
The DRAM logic parameter stimulate wave algorithm was proposed, which generated automatically the stimulate wave according to the circuit function and avoided personal error.
本文建立了羊肚菌液体发酵确定接种菌龄的量化方法，经验证，此方法避免了人为误差，结果比较准确。
The quantified method of judging inoculating age of Morchella were established, which has avoided human error and the result was satisfactory.
这个思路非常新颖，国内只有我们公司有这项专利，免去手动调平的各种繁杂以及人为误差，节约了时间，真正做到了一劳永逸。
This idea is very novel and only our company has the patent. It was avoid human error in manual leveling, save the time and really did it once and for all.
针对坐标机测量车体孔位时目视孔位中心所造成的人为误差，提出了消除这种误差的几种方法。并分析了它们各自的原理及特点。
As to the visual error caused by personal factors in measuring holes of metal car body, several ways to eliminating it were presented and each way's feature and principle were analyzed.
目前国内外评判大理石花纹的方法，基本上是采用感官评定人员对照大理石花纹图谱进行感官评判，这样的评判结果必然会带来不同程度的人为误差。
Now it adopts the sensory estimate expert according the marbling picture to estimate marbling in home and overseas, but the result of this method has contrived error in some degrees.
实验结果表明，本算法有利于提高骨龄的计算精度和速度，减少人为评价误差对骨成熟度评价结果的影响。
Through experiments, the algorithm is proved effective in enhancing the precision and speed of calculation of skeletal age and decreasing the impact of man-made evaluation error.
用程序计算器进行天然气流量计算，可减少人为的查表和计算误差，操作也十分简便。
The calculation of natural gas flowrate with a programmable calculator can reduce human errors from consulting tables and calculation and its operation is very convenient.
轴承是故障发生率比较高的部件，用简易诊断法难免会出现人为的判断误差。
The bearings are the parts with higher malfunction occurrence rate, and it is hard to avoid appearance of the man-made judgment errors to utilize the simple diagnosis method.
所以在做现场地层对比的工作时，如何提高地层对比的准确性，减少录井人员在现场对比层位时因人为因素所带来的误差就显得很有必要。
So it is very necessary to improve the accuracy of formation contrast and reduce the error caused by the workers of log when we do formation contrast in logging site.
采用自动加卸试验力方法，保荷时间稳定，消除了人为操作误差，示值精度高。
The adoption adds to unload automatically to experiment the dint method, protecting time of stable, dissolves artificial operation error margin, show the worth accuracy high.
结果表明，所提出的方法在相当大程度上滤去了测量过程中的误差，减少了人为因素的影响，增加了摩阻力计算的可靠性。
It is shown that the errors in the measuring process are filtered to a large extent, and the reliability of the calculated friction forces is increased by using this method.
中心偏的自动化测量避免了人为测量误差，提高了测量精度，为提高仪器的光学质量提供了依据。
The automatic measurement of optical lens avoids man-made measurement errors, enhances the measurement precision, and provides a warrant for improving the quality of optical equipment.
通过对以上问题的研究，希望能够使疾病诊断中由于人为因素所造成的诊断误差有所降低，同时也希望本文会对某些疾病基于语义网络的诊断方法研究有些许帮助。
I hope that the diagnosis error will be reduced through the research and the paper can help the peoples in research on the method to diagnose based on semantic network too.
实际应用表明，这种方法不仅能够提高计量工作的效率，还可以杜绝人为的操作误差，有效防止各种作弊行为。
Practical application shows that it can improve work efficiency, put an end to factitious operation error, and prevent various of cheat behaviors.
常规的原油凝点分析是定义凝点为一范围温度，其测试过程复杂，人为因素的影响致使误差较大。
Crude oil's freezing point defined by the routine freezing point analysis is an interval of temperature. The testing process is complicated, with an obvious error influenced by artificial factors.
常规的原油凝点分析是定义凝点为一范围温度，其测试过程复杂，人为因素的影响致使误差较大。
Crude oil's freezing point defined by the routine freezing point analysis is an interval of temperature. The testing process is complicated, with an obvious error influenced by artificial factors.
应用推荐