将地脚螺栓连接板用螺母紧固。
安装机床不需设置地脚螺栓与地面固定。
Installs the engine bed not to establish the foot bolt and the ground is fixed.
不错。地脚螺栓垂直。
灌浆在七天以后凝固，我们就将拧紧地脚螺栓。
After seven days, the grouted mortar will have concreted, then we shall tighten the anchor bolts.
泵、轴承座、电动机的基础地脚螺栓是否松动；
Pumps, bearing blocks, motor loose Whether or not the foundation anchor bolts;
文章对储罐及直立容器地脚螺栓计算分类作了介绍。
Vertical container and tank containers Bolt calculation and the classification introduced.
本发明适用于对钢柱地脚螺栓强度不够时进行加固。
The reinforcing structure is suitable for carrying out reinforcement when the intensity of the holding down bolt of the steel column is not enough.
将机组放在地脚螺栓的基础上，找正后拧紧地脚螺栓。
Unit on the basis of the anchor bolt, after looking for is tighten the anchor bolts.
安装地脚螺栓时其外露螺栓顶面的高度不的大于螺母的厚度。
When installing the foot bolt, the outside of the foot bolt top can not be bigger than the thickness of the nut.
本发明涉及一种大型破损地脚螺栓对接专用套筒及其对接方法。
The invention relates to a special butt joint sleeve for a large breakage anchor bolt and the butt joint method thereof.
六角螺栓，双头螺栓，地脚螺栓，膨胀螺栓，吊环螺栓，牙杆。
Hex Bolts, Stud Bolts, Anchor Bolts, Expansion Bolts, Eye Bolts, Threaded Rods.
地脚螺栓和预埋底板须根据图纸上的尺寸排布，且应是非常精确的。
Foundation bolts and insert plate must be arranged according to the drawings and must be very accurate.
本产品尤其适合作大型设备安装时的地脚螺栓，无须在安装前预埋。
The product is especially suitable for ground bolt when equipping a large-scale facility without pre-embedded before the equipment.
水准点的设立同样相当重要，它直接影响到地脚螺栓顶部标高的控制。
Considering its direct influence on controlling the top elevation of anchor bolts, the establishment of leveling point is also a very important procedure.
安装机床不需设置地脚螺栓与地而固定，节省安装费用，缩短安装周期。
Machine are stationary on the floor without anchors. Therefore the installation cost and time can be greatly saved.
底座通过地脚螺栓连接固定在基础上，承受升降机的自重和提升物品重量。
The base is fixed on the foundation by the foundation screw, it bears the self weight of the lift and the lifting articles' weight.
裙座上应有合适的、含地脚螺栓座的基础圈，业主另外书面认可时除外。？
Skirts shall be provided with a proper base ring which shall include anchor bolt chairs except when OWNER approves otherwise in writing.
介绍了地脚螺栓从设计到施工的变革，阐述了地脚螺栓施工的两种方法及其步骤。
This paper introduces the transformation of stone bolt from the design to the construction, and expounds two methods for stone bolt construction and its and steps.
该方法包括以下步骤：将破损地脚螺栓破损部分割断，并将割断处的毛刺打磨光滑；
The method comprises the following steps: cutting off the damaged part of the damaged foundation bolt; polishing the burr on the cutting part until the cutting part is smooth;
在电子天平使用地点调整地脚螺栓的高度，使水平仪内的空气泡正好位于圆环的中央。
At the place of installation, level the balance using the leveling feet so that the air bubble is centered within the circle of the level indicator.
对各标准中有关塔器裙座和地脚螺栓材料选用的内容进行了对比，并提出了自己的观点。
Some standards on the selection of skirt material and anchor bolt material in tower design were compared, and some Suggestions were put forward.
公司产品主要以出口为主，其中包括地脚螺栓，钢筋支架，地桩，以及各种冲压五金件。
Company products are mainly exported to, including the anchor bolts, reinforced support, to pile, and various stamping hardware.
地脚螺栓与螺母必须配套加工，配合使用。设备基础的预埋地脚螺栓采用定位模板安装固定。
The anchor bolts and nuts must be processed and used as a whole set. The embedded anchor bolts for equipment foundation shall be installed and fixed with positioning forms.
本文结合工业设备安装经验，介绍设备安装工程中三种常用的地脚螺栓安装技术及其纠偏措施。
This text combines industrial equipment installation experience, introduce three kinds of commonly used foundation bolt mounting techniques and rectify deviations.
对于不同内部介质接触的部件，如外表面、防护罩及支承凸缘等不需腐蚀余度，地脚螺栓除外。
No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.
安装平衡机的地基不符要求，底部结合面未垫实，地脚螺栓未紧固，或放在楼面上，引起共振。
5 installation of balancing machine foundation does not meet the requirements, combined with the bottom surface without pad, the anchor bolt is not fastened, or on the floor, causing resonance.
将底座安装在已打好的基础上，并用水平仪调平。拧好地脚螺栓上的螺母，将底座与基础固定联接。
Install the base on the ground, and adjust even using the level. Fix the screw, and connect the base and ground.
将三根附墙杆起吊到适当高度，首先用销轴将杆与标准节一端连接，然后安装到地脚螺栓连接板上。
Lift the 3 shaft adhered to wall to the suitable height, firstly, connect the shaft with one end of the standard section, then install on the connection plate of foundation bolt.
化学锚栓，地脚螺栓，丝杆，膨胀螺丝。各类垫片以及冲压件，轴承，车加工件，液压总成，连接件。
Various kinds of washers, stamping parts, bearings, machine processing parts, hydraulic pressure assemblies and connecting fittings.
化学锚栓，地脚螺栓，丝杆，膨胀螺丝。各类垫片以及冲压件，轴承，车加工件，液压总成，连接件。
Various kinds of washers, stamping parts, bearings, machine processing parts, hydraulic pressure assemblies and connecting fittings.
应用推荐