本文综合论述了多孔陶瓷材料微观结构表征及各种性能的测试技术，以及相关的仪器设备。
The article synthetically discusses the characterization of microstructure of porous materials and testing technologies about the properties of porous ceramics, and correlative testing apparatus.
本文综合论述了多孔陶瓷材料微观结构表征及各种性能的测试技术，以及相关的仪器设备。
The article synthetically discusses the characterization of the microstructure of porous materials and testing technologies about the properties of porous ceramics, and correlative testing apparatus.
采用XRD和SEM等测试手段对用铝厂废渣和高岭土合成的莫来石材料进行微观结构表征。
XRD and SEM techniques were used to characterize the mullite solid solution synthesized from waste aluminum slag and kaolin.
作为新一代微观结构表征技术，中子散射正广泛应用于材料科学、物质科学、生物科学等诸多学科领域。
As a new generation of crystallographic characterization technique, the neutron scattering is being widely applied to materials science, substance science, biology science and so on.
硬化层的特征通常由它的硬度、深度来表征。硬化层材料的微观结构又取决硬化过程。
The feature of hardening layer is usually expressed by its hardness and depth, and the micro-structure of its material is determined by the hardening process.
采用TEM和XRD对碳球的微观结构和晶体结构进行表征。
TEM and XRD were used to characterize the microstructure and crystal structure of carbon spheres.
利用压汞曲线计算出来的分数维来定量表征储集层微观孔隙结构的非均质性；
The fractal dimension calculated from mercury injection curves is used for quantitative characterization of heterogeneity in micro-porosity structure of reservoir.
通过扫描电镜(SEM)对涂膜和蒸发膜进行表征，从膜的微观形貌和分子结构两方面对敏感机理进行了分析。
The coating film and evaporated film were both characterized by SEM. From the two sides of the micro appearance and molecular structure, the sensitive mechanism was analyzed.
论文中采用了多种测试表征方法对SEBS／TPU共混材料的流变性能、低温性能、微观结构等进行了研究。
Various characterization methods were adopted to investigate rheological property and cryogenic property and microstructure of the blends of SEBS/TPU.
材料微观组织结构的三维重构和定量表征一直是国内外材料科学领域的焦点和难点。
Three-dimensional reconstruction and quantitative characterization of the microstructure of materials is the most important and difficult part of material science.
对陶瓷微球的微观结构和性能进行了表征。
The microstructure and characterization of ceramic microspheres were investigated.
通过TEM、SEM、TGA和DMA等对其微观结构、热性能和动态力学性能等进行表征和分析。
The microstructure and properties are characterized by means of TEM, SEM, TGA and DMA.
通过DTA、XRD、TEM、EDS及色度测试等对颜料的形成过程、微观结构及性能进行了表征和分析。
The preparation process, microstructure and properties of as prepared pigments were characterized by DTA, XRD, TEM, EDS and color measurement.
研究了纳米晶体铜材料的压制工艺条件对其相对密度和显微硬度的影响，并用正电子湮没寿命谱、扫描电镜和热重分析仪对其微观结构进行了表征。
The influence of relative density and microhardness on pressing parameter of nanocrystalline Cu was studied, and its microstructure was characterized by PAS, SEM and TG.
研究了磁性薄膜材料的微观结构以及宏观特性的表征方法和原理。
Study measure and principle of microstructure and macroscopic quality of magnetic films materials.
采用傅里叶红外光谱仪(FTIR)，扫描电子显微镜(SEM)表征了本征态和掺杂态聚苯胺的结构和微观形貌。
The process of electrochemical deposition and the morphology of obtained deposits of polyaniline film is studied in combination with SEM and FTIR characterization.
本文阐述了管壳式换热器中表征整体特性和反映微观行为的各项传热参数之间的关系并对几种典型的结构型式作了分析。
We describe in this article the relations between whole characteristics and various parameters of heat transfer representing microbehavior. We also analysed a few typical structure models.
通过SEM、HRTEM及SCXD等表征手段，对晶须的表面形貌和微观结构进行了分析，并确定其生长方向为晶须的方向。
Surface morphologies and microstructures of the whisker were characterized by using SEM, HRTEM and SCXD. The preferential growth orientation of the whisker was determined to be along its direction.
方法：应用共沉淀法制备纳米羟基磷灰石/壳聚糖复合材料，并采用TEM、SEM、XRD等手段对材料晶相组成、微观结构、晶粒大小进行分析表征。
Methods:Nano-hydroxyapatite/chitosan composites were prepared through a co-precipitation method. The properties of these composites were characterized by means of TEM , SEM, XRD test machine.
透射电子显微镜表征互穿共聚物乳胶膜的微观结构。
The characterization with transmission electron microscope (TEM) and infrared spectrometry (IR) has illustrated the copolymerization process.
研究了纳米银粒子的表面修饰与稳定分散技术，借助于TEM、XPS、XRD、FTIR等分析手段表征了表面修饰前后纳米银粒子的微观结构；
The surface modification and steady dispersion technology of silver nanoparticles were studied and their microstructure were characterized by TEM, XPS, XRD and FTIR.
采用扫描电镜对模板、复合物及聚合物的形貌和微观结构进行了观察和表征。
The structure and morphology of prepared materials were detected by scanning electron microscope.
以红外光谱、透射电子显微镜表征互穿共聚物乳胶膜的微观结构。
The microstructures of INP latex films were characterized by IR and transmission electron microscopy (TEM).
以红外光谱、透射电子显微镜表征互穿共聚物乳胶膜的微观结构。
The microstructures of INP latex films were characterized by IR and transmission electron microscopy (TEM).
应用推荐