介绍了近年来水性氯化聚丙烯的研究进展。
The recent development of waterborne chlorinated polypropylene was reviewed.
介绍了氯化聚丙烯的特性、制造方法及应用。
Detailed description of properties, production processes and application of chlorinated polypropylene is given in the paper.
氯化聚丙烯(CPP)是聚丙烯氯化改性的产物，其应用广泛。
Polypropylene is modified by chlorine to obtain the chlorinated polypropylene (CPP) which is used widely in industries.
氯化聚丙烯(CPP)是用于聚丙烯制品涂饰过程的附着力促进剂。
As an adhesion promoter, the chlorinated polypropylene (CPP) is used in the coated process for polypropylene products.
介绍了氯化聚丙烯的性能、用途、制备方法和国内外生产与市场状况。
The properties, uses, markets and recent development of chlorinated polypropylene and production processes are reviewed in this paper.
以氯化聚丙烯为主要原料，制备了一种环保型的聚丙烯塑料底材表面处理剂。
A kind of environment friendly finishing chemicals for treating polypropylene plastic surface is developed with chlorined polypropylene as main material.
人们发现，将聚丙烯制成氯化聚丙烯(CPP)，与聚丙烯有比较好的附着力。
It is found that chlorinated polypropylene (CPP) which is made from polypropylene has good adhesion between PP.
本文对氯化聚丙烯的特点以及近年来氯化聚丙烯的接枝改性的研究作了较详细的综述。
The characteristics and research development on grafting and modification of chlorinated polypropylene in recent years are summarized in this paper.
详细介绍了氯化聚丙烯的性能特征、用途及制备方法。我国在氯化聚丙烯的开发应用方面前景广阔。
Detailed description of properties, USES and production processes of chlorinated polypropylene is given. There are bright prospects for China in the development of chlorinated polypropylene.
测定了氯化聚丙烯(CPP) -涂料树脂在甲苯溶液中的粘度，发现体系的粘度主要是南cpp含量决定的。
The solution viscosity of chlorinated polypropylene (CPP) as coating resin in toluene was measured. It was found out that the viscosity of the system was primarily dependant on the content of CPP.
氯化聚丙烯是一种聚丙烯的化学改性物，它有许多优点，而对氯化聚丙烯进行接枝改性又可使其具有更多的新功能。
Chlorinated polypropylene is kind of modified polypropylene, it has much virtue, and if it is grafted and modified, it will have much more new properties and function.
氯化聚丙烯是一种聚丙烯的化学改性物，它有许多优点，为了进一步提高其性能，通常需对氯化聚丙烯进行接枝改性。
Chlorinated polypropylene is a kind of chemically modified polypropylene and has many virtues. In order to improve its performances, it should further be modified by grafting.
用稀溶液粘度法测定了几种不同氯化聚丙烯粘均分子量，并且将稀溶液测定的特性粘数与一般工业使用浓度的粘度联系起来。
The viscosity average molecular weighs of several different CPPs were determined by dilute solution viscometry and the intrinsic viscosity was related to the viscosity of industry concentration.
测定了接枝物的分子量，计算了接枝物的结构单元数，认为每个氯化聚丙烯链上接上的马来酸酐基团个数在30～67之间；
Construction unit number was calculated by determining molecular weight. About 30-67 MAH units are grafted to a CPP chain.
以氯化聚乙烯接枝马来酸酐的接枝物为基料，制得性能优良，使用方便的聚丙烯发泡材料用粘合剂。
The convenient adhesive with good properties for polypropylene foam material was prepared here, based on graft polymer from chlorinated polyethylene and maleic anhydride.
该氯化等规聚丙烯可代替过氯乙烯、氯化橡胶用于各种防腐涂料，所得防腐蚀涂料具有良好的性能。
The obtained CIPP can be used to replace chlorinated polyvinyl chloride and chlorinated rubber for various corrosion protection coatings with excellent corrosion protective performance.
通过对高岭土配制的浊度水投加磁粉、聚合氯化铁和聚丙烯酰胺进行磁絮凝反应，研究了形成含磁絮体的最佳工艺参数及机理。
By putting magnetic particles, PFC and PAM into turbid water made up by kaoline to carry on magnetic flocculating, optimum parameters and mechanism of forming magnetic composite flocs were studied.
探讨了等规聚丙烯原料性质对氯化反应的影响，同时研究了氯化反应的基本特征。
The effect of properties of isotactic polypropylene on Chloridizing reaction and Basic Characteristic of Chloridizing reaction are discussed.
介绍了采用酸析絮凝、聚合氯化铝与聚丙烯酰胺（PAC-CPAM）絮凝、聚硫氯化铝与聚丙烯酰胺（PACS-CPAM）絮凝处理双螺旋挤压法制浆废液。
Three flocculation systems, acid precipitation, PAC-CPAM, and PACS-CPAM were introduced to treat the waste liquor from twin-screw extrusion pulping respectively.
将组氨酸以共价键连接到酰氯化的聚丙烯酸分子网络上，设计合成作为智能高分子催化剂的聚丙烯酰胺支载咪唑基化合物。
A polyacrylate supported imidazole group, as an intelligent polymer catalyst, was designed and synthesized by linking of polyacrylate chloride with histidine in covalent bond.
以聚合氯化铝（PAC）、阴离子聚丙烯酰胺（PAM）为混凝剂，以H2O2-O3为氧化剂，采用混凝—催化氧化法处理对丁苯橡胶生产废水。
Styrene butadiene rubber production wastewater was treated by the coagulation-catalytic oxidation process with PAC and PAM as coagulants and H2O2-O3 as oxidants.
本文利用聚合氯化铝(PAC)和聚丙烯酰胺(PAM)作复合混凝剂，对其进行进一步除磷研究。
Polyaluminum chloride (PAC) and polyacrylamide (PAM) were used as complex flocculent to further remove phosphorus.
以熔融氯化锌作为热载体，对聚丙烯(PP)的热解液化进行研究。
Pyrolysis and liquification of polypropylene (PP) were studied by using molten ZnCl2 as heat carrier.
研究了羟基氯化铝和改性聚丙烯酰胺的制法，然后与一种天然物质复配，制成了一种复合水处理混凝剂。
Preparation of hydroxy-aluminum trichloride and modified polyacrylic amide was discussed. Together with a natural material, high-efficiency water treatment coagulant was made.
塑料填料材质包括：聚乙烯（PE）、聚丙烯（PP）、增强聚丙烯（RPP）、聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）及聚偏氟乙烯（PVDF）等。
Plastic packing material include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and PVDF (PVDF), etc.
塑料填料材质包括：聚乙烯（PE）、聚丙烯（PP）、增强聚丙烯（RPP）、聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）及聚偏氟乙烯（PVDF）等。
Plastic packing material include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and PVDF (PVDF), etc.
应用推荐