是自动浇注机、自动浇包还是人工浇包浇注？
县挂行走式浇注机是一种新型的适用于铸造车间熔化工部浇注生产线上的专用机械浇注机，可大大减轻工人劳动强度，提高劳动生产力。
The hanging and stepping run machine is a new and special run machine adapted for the run line in the melt work of the foundry workshop, and it can greatly reduce work force and increase productivity.
涵管机在浇注涵管的过程中要注意管座、截水环混凝土采用C20的混凝土浇注。
He slipped end-over-end machine in the process of casting he slipped end-over-end should pay attention to the seat, cut water ring with the concrete pouring concrete C20.
在检测浇注温度、铸型温度和铸型转速的基础上，用微机实现了对离心铸管机的过程控制。
Based upon the detection of the pouring temperature, and the mould temperature and speed, the process control for centrifugal pipe casting machines is realized by using a microcomputer.
倾炉机构由2台减速机从电炉两侧电动倾炉浇注钢水之用。
Leaning furnace machine electrically lean furnace and pour molten steel by 2 speed reducers from the both sides of electric furnace.
确定了分型面、浇注系统等，选择了注射机，计算了成型零部件的尺寸。
Had determined a minute profile, the casting system and so on, has chosen the injection machine, has calculated the formation spare part size.
除渣机械手控制系统能够和上位机控制系统进行通信，从而保证整个自动浇注生产线在预定的生产流程控制下进行生产。
Slag manipulator control system can communicate with PC control system and can ensure the automatic casting production line work under the control of the production process.
主要产品有：鼓风机、冲天炉、浇注设备、减速机、铁饼机、清理设备、混砂设备、除尘设备。
The main products are: Blower, the Cupola, pouring equipment, reducer, discus machine, cleaning equipment, Mixer equipment, dust removal equipment.
同时，从压铸机选择、工艺参数设置、浇注系统设计角度探讨了压铸模设计关键技术。
The key technologies for die casting die were approached from some aspects of selecting die casting machine, setting processing parameters, designing gating system.
铸坯内产生针孔气泡缺陷的原因是钢液脱氧不良，产生大体积气泡缺陷的原因是铸机浇注过程中氩气流量过高。
The defects on pinhole bubble formed in slabs result from badness deoxidization, and the defects on large volume bubbles formed in slabs result from the high flux of argon during casting.
注射模的浇注系统是指从注塑机喷嘴开始到型腔为止的塑料流动通道，它是模具的一部分，一般分为普通流道浇注系统和无流道浇注系统两大类。
The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.
倾炉机构由2台减速机从电炉两侧电动倾炉浇注钢水之用。
Dumping bodies from the furnace 2-reducer from the furnace on both sides of the dumping electric furnace steel casting purposes.
垫层应先加以潮湿，铺一层厚2～3cm的水泥砂浆，涵管机然后于水泥砂浆凝聚前浇注第一层混凝土。
Mat layer shall first be wet, put a layer of thick 2 ~ 3 cm of cement mortar, he slipped end-over-end machine and then in cement mortar before the first layer of concrete pouring agglomerate.
对中心及两边材料进行除锈及去杂质；通过模具的中注管浇注钢水；以及抛丸清理机和其它设备除锈除杂质等过程。
The pouring process comprises making the center and both sides material of the compound steel, derusting and decontamination, pouring steel melt, derusting for relevant equipments.
如果布料机臂旋转180度从前面旋转到后面，软管末端能伸到要浇注混凝土路面板的任一处。
If the placing Boom is swiveled 180 degrees from the Basic position to the rear, the end hose can reach every point of the roadway surface being concreted.
如果布料机臂旋转180度从前面旋转到后面，软管末端能伸到要浇注混凝土路面板的任一处。
If the placing Boom is swiveled 180 degrees from the Basic position to the rear, the end hose can reach every point of the roadway surface being concreted.
应用推荐