实验表明准热等静压可得到与等静压相同的结果。
The experiments showed that it achieved the same results as the hot isostatic compaction.
本设备属等静压设备，与现行的热等静压机原理基本一致。
This equipment is isopressing one. The principle is consistent with one of the present hot isostatic pressing machine.
研究了不同退火温度对热等静压纯钒组织和力学性能的影响。
Effects of annealing temperature on the microstructure and properties of pure vanadium manufactured by hot isostatic pressing were studied.
研究了合金在真空烧结和热等静压烧结条件下的显微组织和力学性能。
The microstructure and mechanical properties of the alloy under the conditions of vacuum sintering and hot isostatic pressing sintering were investigated.
其他一些工艺，如消失模铸造，模压铸造和热等静压铸造也会在本文涉及。
Other processes such as lost foam, squeeze casting, and hot isostatic pressing are also mentioned.
介绍了热等静压的优点和工艺技术及其在磁性材料、陶瓷等领域中的应用。
Advantages, and techniques of hot isostatic presses and its application in the field of magnetic material, and ceramics are introduced.
所述烧结包括保护气氛烧结、真空烧结、热压、热等静压、放电等离子体烧结。
The sintering treatment includes protective atmosphere sintering, vacuum sintering, hot pressing, hot isostatic pressing and spark plasma sintering.
实验表明，热等静压铁氧体具有很好的磁性和力学性能，是一种优良的磁头材料。
The results show that HIP ferrites have an improved mechanical properties and such ferrites are very good magnetic head materials for high density recording.
文摘：叙述了热等静压淬火方法的基本特点以及在减小零件变形方面的优良性能。
Abstract: The basic characteristics of hot_isostatic press quenching method and its excellent performances on decreasing part deformation are described in this paper.
就热等静压处理对镍基铸造高温合金的缺陷消除、组织和力学性能的改善作了研究。
The elimination of defects and the improvement in microstructure and mechanical properties of a east Ni-base superalloy treated with hot isostatic pressing (HIP) have been investigated.
结果指出：PPB碳化物在雾化过程中已开始形成，在热等静压过程中继续大量析出。
The results indicate that carbides begin to form on the powder surface while atomization and continue to precipitate and grow into continous networks during HIP-consolidation.
同时阐明，实验室型热等静压设备还可承担适当尺寸的多（?）类型材料HIP零件的生产。
The paper further explains that some parts in certain size and many kinds of materials can be produced by laboratory-scale HIP equipment.
文章共分四个部分，即热等静压技术在钛合金、高温合金、铍材以及难熔金属等方面的应用。
The paper is divided into 4 parts, describing the applications and development of HIP technology in the field of Titanium based materials, Superalloys, Beryllium materials and Refractory metals.
工程压力系统公司(EPSI)通过窑炉升级提高了旧式热等静压系统HIP的可靠性和生产率。
Engineered Pressure systems, inc. (EPSI) can increase the reliability and productivity of older hot isostatic press (HIP) systems with a furnace upgrade.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
国产氩气雾化粉末经热等静压或再经锻造的FGH95合金也出现多种夹杂，影响力学性能稳定。
The domestic alloy FGH95 made from argon atomized powder, then consolidated by HIP with or without forging, also contains various kinds of inclusions affecting the stability of mechanical properties.
采用热压、热等静压和真空、氢气中烧结工艺、可将上述材料制备成具有良好透明性的透明陶瓷。
The material can be prepared to transparent ceramic with excellent transparency with the processes of hot pressing, hot isostatic pressing and vacuum and hydrogen gas sintering.
描述了田口方法在钼材料性能研究中的应用，并详细给出了材料研究中热等静压工艺参数的设计过程。
The application of Taguchi Methods in the study of molybdenum property is described. And the processes of HIP parameter design are given in detail.
结果表明，热等静压处理可以闭合坯件内的疏松孔洞，提高合金致密度，进而提高合金的强度和塑性。
The results indicated that by HIPing porosities in the preforms can be closed and the densities can be increased, then the strength and ductility can be improved.
通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。
The microstructure and the phase composition of the alloy were analyzed through optical microscopy, SEM, EDAX and XRD techniques.
同时还发现，由于原始颗粒边界的原因，MGH754合金热等静压态的塑性要比热挤压态的低很多。
Additionally, the ductility of HIP state of MGH754 alloy is much lower than HEX's because of existence of prior particle boundary.
用热等静压扩散连接法获得了硬质合金与球墨铸铁的直接连接接头和以镍箔为中间夹层的间接连接接头。
The direct bonding joint between cemented carbide and nodular cast iron and the indirect bonding joint by using nickel foil as intermediate layer were obtained by HIP diffusion bonding process.
本文介绍了用扫描电子显微镜和俄歇电子谱仪观察和分析雾化态和热等静压态高温合金粉末颗粒的表面。
An investigation of the surface of Ni-base superalloy powder particles in both as-atomized and as-HIP' ed conditions has been presented in the paper.
建立了硬质合金烧结-热等静压炉内传热的三维非稳态数值仿真模型，对炉内的温度场进行仿真与优化。
A three dimensional unsteady numerical model of cemented carbide sinter-HIP furnace was established. The temperature field was simulated and optimized with this model.
主要探索采用双合金热等静压扩散连接工艺实现高温合金粉末和DD 3单晶合金间可靠连接的可行性。
The development of HIP diffusion bonding of FGH95 superalloy powder and DD3 single crystal has been explored.
采用热等静压处理，消除了铸件的内部缺陷，满足了承受高工作压力的要求，铸件作为重要结构件已获得应用。
In order to meet the requirements of bearing the high working pressure, the internal defects are removed by hot isostatic pressing treatment. This titanium cast-ing. as an important struc...
结果表明，烧结-热等静压制作的硬质合金孔洞消除了，并且硬质合金的抗弯强度和弯曲疲劳寿命也大幅度提高。
The results showed that cemented carbide manufactured by sinter-HIP is free of porosity and transverse-rupture strength, bending fatigue life are also greatly increased.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
应用推荐