常被用作环氧树脂固化剂的化合物。
胺。常被用作环氧树脂固化剂的化合物。
一种双极板，由包含至少一种环氧树脂、石墨填充物以及作为环氧树脂固化剂的金属胺络合物的组合物制成。
The bipolar plate is made from a composition containing at least epoxy resin, graphite filler and a metal amine complex compound taken as an epoxy resin curing agent.
阻燃型胺类环氧树脂固化剂主要包括含磷、舍氮杂环、含硅胺类固化剂，以及舍氮磷杂环和含硅一磷胺类固化剂。
The flame retarded curing agents' mainly included phosphorus-containing, nitrogen - containing, silicon-containing, phosphorus-nitrogen and silicon-phosphorus amines curing agents.
有机耐磨防腐涂料该涂料是由几种耐腐蚀，耐磨损的陶瓷骨料，环氧树脂，改性的聚氨脂树脂，固化剂，及少量添加剂配制而成。
Organic Anticorrosive coating The coating are preparation with a series ceramic powders, epoxy resin, modified polyurethane resin, solidification agent and a few additive.
利用IR、SEM等手段，较详细地研究了铜粉—环氧树脂体系中固化剂与铜粉的相互作用，并探讨了铜粉用量、形状对涂料导电性能的影响规律。
In the preparation of conductive paints of epoxy resin filled with copper powders the reaction between the curing agent and copper was studied in detail by means of SEM and IR.
合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。
The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent.
研究了涂料中颜基比、固化剂与环氧树脂的当量比等对涂膜性能的影响。
The influence of pigment to varnish base ratio and the ratio of epoxy resin to curing agent on film's performance were studied.
本文研究了固化剂和预聚物用量对环氧树脂性能的影响。
The effect of the amounts of curing agent and prepolymer on the properties of cured epoxy resins were investigated.
初步固化实验结果表明，这种环氧树脂潜伏性固化剂具有较好的固化性能。
The results showed that the new curing agent has good stability at room temperature and improved curing performance.
通过改性环氧树脂及固化剂，实验研究了浸渍胶的粘度、韧性及耐冷热冲击性、浸渍性。
A sort of modified epoxy resin and curing agent in terms of its viscosity, tenacity, cold-proof and heat-proof impinge and dipping properties were described.
本文比较详细地介绍了环氧树脂两类固化剂。
This paper introduced detailed two kinds of hardener of epoxy resin.
本发明属固化剂技术领域，具体为一种新型环氧树脂组合物。
This invention is a neotype ethoxyline resin compounds, and it's belongs to curing agent technological field.
采用二步法，研制成重防腐粉末涂料用的环氧树脂及固化剂，其主要性能指标达到国外同类产品水平。
By use of two-step process, an epoxy resin and hardener for heavy duty powder coatings have been developed, the main technical specifications reached the similar standard of products abroad.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。
Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.
研究了DCPD酚环氧树脂与酸酐及胺类固化剂的固化反应活性。
It was studied on the curing activity of DCPD phenol epoxy resin with anhydrides and amines.
讨论了聚硫橡胶与环氧树脂的配比和固化剂用量对涂层性能的影响。
The influence of the ratio of polysulfide rubber and epoxy resin, and amount of hardener on the properties of coating film are discussed.
介绍了该体系中水性环氧树脂的制备方法、水性固化剂的种类以及助剂和颜填料的选择方法。
The preparation methods of waterborne epoxy resin, the kinds of waterborne curing agents and the methods for choosing auxiliary, pigments and fillings in the system were introduced.
通过选用低黏度液体酸酐为环氧树脂的固化剂，制得了一种用于rtm的高性能树脂体系。
A high performance resin matrix for resin transfer moulding (RTM) was prepared by applying low viscosity anhydride to cure epoxy resin.
采用均苯四甲酸酐（PMDA）和过氧化二苯甲酰（BPO）双固化剂固化聚丁二烯环氧树脂（ELPB），制备了ELPB/PMDA/BPO耐高温胶粘剂。
The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).
同时创新性的发现并采用硫磺作为该环氧树脂的固化剂，并对该体系的双固化特性、固化机理及硫磺与其它固化剂的复配效果进行了深入的研究。
And innovatively adopting sulfur as the curing agent of epoxy and deeply studying on the double-curing behavior, curing mechanism and the cooperating effect of sulfur and other curing agent.
研究了不同种类固化剂、增韧剂、填料及用量变化对环氧树脂综合性能的影响。运用正交实验总结出了一组最佳配方。
This paper describes the influences of some curing agents, plasticizers, filling materials on epoxy resin properties. An ideal compounding is obtained by orthogonal test method.
通过添加不同填料并与固化剂反应制得了不同环氧树脂试样。
The different epoxy resin test samples were prepared by using different fillers and by the reaction of curing agent.
采用间苯二酚环氧树脂和含巯基的固化剂制成了室温快固金属修补剂。
The fast curing polymer alloy putty at room temperature was developed by applying of Resorcinol epoxy resin and mercapto contained curing agent.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
本文介绍以TDE- 85环氧树脂作为基体，以间苯二胺(MPD)、间苯二甲胺(A -50)作为固化剂，制备高模量树脂基体的方法。
The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, a 50 and MPD were used as curing agents.
以环氧树脂为基体，间苯二胺和氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the con-ducting filler.
以环氧树脂为基体，间苯二胺和氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the con-ducting filler.
应用推荐