综述国内外电炉炼钢技术发展趋势。
Technical development trend of domestic and abroad steel making by electric furnace are expounded in this paper.
总结了宝钢电炉炼钢厂LF炉之温度行为。
The temperature behavior of the ladle furnace (LF) of EAF in Bao Steel is summarized.
本文介绍电炉炼钢开发应用碳化硅新型脱氧剂的情况。
The development and application of the new deoxidizer SiC in electric arc furnace steelmaking are studied in the paper.
全连铸电炉炼钢厂的多炉连浇问题实质是多工序的衔接匹配问题。
The essence of sequence continuous casting in EAF steel plant is the joining and matching of multiprocess of production and the key is to shorten tap to tap time on EAF.
直接还原铁质量，必须兼顾直接还原生产和电炉炼钢两个生产环节。
To thinking of the quality of DRI two parts, namely direct reduction and steelmaking on electric furnace must be considered.
详细介绍了电炉炼钢用石墨电极柱侧面防氧化涂层的特点及开发过程。
This article has described the characteristic of the anti-oxidization coating on the side of graphite electrode used for EAF melting and its development process.
简析了石钢电炉炼钢厂矩型坯内裂产生的原因，并提出了相应改造措施。
The reason for inner crack in rectangular billet is analyzed and some measures to improve presented.
进一步降低成本、节能降耗，将成为电炉炼钢企业增强竞争力的主要手段之一。
Further to reduce costs, save energy will become one of the principal means to increase competitiveness for the electric steelmaking business.
直接还原铁粉经冷固结成型后即为电炉炼钢的优质原料，而高纯铁粉的利用价值更高。
The direct reduced iron is a high-quality material after coldly bonding, and the utilizable value of high-purity iron powder is higher.
公司同时具备转炉、电炉炼钢系统全套功能耐材设计及现场施工服务的整体承包能力。
At the same time, we can undertake whole project from design of complete sets of functional refractories for converter and EAF steel-making system to in-site installation services.
本文介绍了利用微机进行电炉炼钢合金化优化计算及其决策分析的数学模型和应用实例。
In this paper the mathematical pattern and its application of the optimum calculation and decision analysis for Alloying of electric furnace steelmaking are presented with ex-samples.
在以前国内的电炉炼钢项目中，虽然采取了各种各样的噪声治理方案，但效果均不很理想。
In the domestic electricity stove steel-making project in the past, though adopted various noise control schemes, but the result is not very ideal.
在2020年前各国钢铁工业的主要对策是长流程节能减排，与扩大电炉炼钢为核心的短流程。
The countermeasures of iron and steel industry in many countries before 2020 are energy saving and emission reducing in BF-BOF process and expanding EAF process.
本文从电炉炼钢的技术经济指标和钢质量等方面，论述了直接还原铁及其它金属炉料的使用特点。
Based on the technical and economic index of EAF steel making and quality of steel, the characteristics of DRI and other scrap substitutes are reviewed in this paper.
在LD转炉炼钢取代了平炉炼钢的主导地位后，而今氧气转炉炼钢又面临电炉炼钢的竞争与挑战。
After taken the leading place of open-health furnace, oxygen LD converter is being faced with the challenge and competition of electric arc furnace.
康斯迪工艺提出了电炉炼钢新概念：即利用电弧炉排出的高温废气对送往炉中的炉料进行连续预热。
The CONSTEEL process introduces a new concept in electric steel -making. The process USES the furnace off-gas and fuel to preheat the scrap fed into the furnace.
本文介绍了计算机辅助电炉炼钢工艺设计的软件特点，程序框图配套技术等，对现场生产起着重要作用。
In this paper software characteristics, program frame mid conveyance technology of technological CAD in ElectricFumace steelmaking are studied. It is important to the production of the scene.
结合江阴兴澄钢铁有限公司电炉车间介绍了过程计算机对电炉炼钢控制的内容和过程，并对此提出改进的措施。
Structure and configuration of process control computer system for converter in the Second Steelmaking Plant of Baosteel Branch are introduced.
以电熔镁砂为主要原料，固体酚醛树脂作结合剂，研制成功与电炉炼钢配套使用的中间包工作层用镁质干式捣打料。
A magnesite dry refractory ramming material used in tundish lining of electric furnace is researched, with electrically fused magnesite as main raw material and solid phenolic resin as bonding agent.
在分析产生式系统组成的基础上，结合电炉炼钢厂的具体情况，编制出基于产生式规则的电炉炼钢厂计算机调度软件。
Based on the production system and the facts of the factory, the computer schedule software for EAF steelmaking plant is programmed.
本文简单介绍了贵阳特殊钢有限责任公司电炉炼钢车间的电炉—精炼炉—连铸机三位一体短流程工艺路线的设计特点。
This article gives a brief introduction of the design features of the mini-mill type process routine integrating EAF-LF-CCM of the EAF steelmaking shop of Guiyang Special steel Co. Ltd.
介绍日本钢铁生产中平炉炼钢法、转炉炼钢法、电炉炼钢法、炉外精炼法、不锈钢精炼法。着重论述了连铸生产技术。
Open hearth steelmaking, converter steelmaking, electric furnaces steelmaking, secondary steelmaking and stainless steelmaking in Japan are introduced.
提出了电弧炉炼钢比较优势分析框架，将电炉钢和转炉钢作为替代品进行比较，得出了电炉炼钢的优势及影响其应用的因素。
An analytical frame work is developed by treating the BOF steel as EAF steel's substitutes, Then the application potential and application potential are gotten using the framework.
本文介绍了炼钢电弧炉采用的煤氧喷吹系统及工艺，阐述了该技术在电炉炼钢生产中的节电效果，同时提出需要进一步改进技术和提高的方向。
The article introduces a coal powder and oxygen ejection system and technology on arc furnace steelmaking and states the effect on electricity saving, points out the improvement direction.
论述了现代炼钢流程冶炼工序即转炉冶炼和电炉冶炼的共性问题；
The sameness of smelting procedure in modern steelmaking process including BOG steelmaking and EAF steelmaking are discussed.
碳化铁作为一种优质废钢的替代物已开始应用于电弧炉炼钢。文中对在电炉中用碳化铁炼钢的有关问题试分析讨论。
Iron carbide is one of replacement materials of high quality scrap. Some problems of EAF steelmaking using iron carbide have been discussed.
电炉(EAF)、钢包精炼炉(LF)和VD炉是电弧炉炼钢的关键设备。
EAF (Electric Arc Furnace), LF and VD are key equipments of steel-making.
总结论述了炼钢电炉除尘系统的确定，以及电炉除尘系统设计应注意的几个问题。
The author sum and discuss the electric- arc furnaces dedust system in steelwoks, and some remarkabel problerns in electric- arc furnaces dedust system.
广泛用于电加热器、炼钢电弧炉、电石、铁合金、矿冶电炉等。
Widely used in electric heaters, electric arc furnace steel, calcium carbide, iron alloy, such as mining and metallurgy furnace.
广泛用于电加热器、炼钢电弧炉、电石、铁合金、矿冶电炉等。
Widely used in electric heaters, electric arc furnace steel, calcium carbide, iron alloy, such as mining and metallurgy furnace.
应用推荐