泰斯拉跑车大量采用了碳纤维复合材料。
The Tesla Roadster makes significant use of carbon fiber composite materials.
从事与金属和碳纤维复合材料有关的工作。
Works with both metal and carbon fibre composite materials. Registration or licensing may be required.
开展碳纤维复合材料智能方面的研究非常必要。
So it is necessary to study and analysis carbon fiber reinforced smart composite material.
研究了高模量碳纤维复合材料结构的电磁铆接工艺。
We have to find out how to do EMR successfully without causing damage in high modulus carbon fiber composites structure.
本文对影响碳纤维复合材料性能的有关因素作了探讨。
In this paper, the factors affecting the properties of CFRP discussed in detail.
主要研究了碳纤维复合材料转移法金属化载体膜的制备。
The preparation of the carrier film which is used on CFRP metalizing by transfer is studied in this paper.
同时总结了大尺寸、轻质碳纤维复合材料天线一些设计经验。
At last, the author give some advice about how to design the light composite material antenna.
介绍了碳纤维复合材料天线采用转移法进行表面金属化的技术。
This paper describes the technology of the carbon fiber antenna metalizing by transfer.
为碳纤维复合材料构件的钻孔，研制出一种便携式旋转超声钻。
A portable and rotary type ultrasonic drilling machine is developed and designed for drilling of carbon fibre composition components.
目前在俄罗斯制造的飞机中，碳纤维复合材料所占比例超过20%。
Now the proportion of carbon fiber parts in aircraft produced in Russia does not exceed 20 percent.
叙述了制造高精度碳纤维复合材料天线用树脂基体的应用研究情况。
This paper described the application study for a resin matrix used to make carbon fiber composite materials antenna.
碳纤维复合材料的孔壁表面微观形态是孔加工质量的重要特征之一。
The microstructure on the hole surface of CFRP is a very important characteristic of the quality of hole drilling.
将碳纤维复合材料光纤光栅传感器用于某长江大桥的结构加固工程。
Fifth, carbon fiber composite materials FBG sensors were used on a reinforcement project of the Yangtze River Bridge.
碳纤维复合材料以其优异的综合性能成为当今世界材料学科研究的重点。
Today, carbon fiber reinforced composite has been a focus of material science, because of its excellent integrative properties.
主要论述制备碳纤维复合材料的先进工艺及碳纤维复合材料的应用新领域。
The paper introduces mainly the advanced preparation technology of carbon fiber composites and their new application areas.
树脂基碳纤维复合材料(CFRP)产品具有轻质、高强度、高刚度等特点。
Carbon Fiber Reinforced Polymer (CFRP) had the characteristics of light weight, high strength, high rigidity.
由于碳纤维复合材料刚性好、脆性大，因而给装配工作带来了新的技术问题和困难。
High rigidity and brittleness of carbon-fibre composite bring new technical problems and difficulties in assembling.
针对航空工业碳纤维复合材料板材的孔隙率检测，研制了便携式超声无损检测系统。
Aiming at the test of void content of carbon-fiber reinforced composite used in aeronautic industry, developed a portable ultrasonic non-destructive test system.
以硅橡胶材料制作的芯模与钢模组合使用制备碳纤维复合材料制件，应用效果较好。
The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.
伦琴卫星是一只X射线望远镜，同时拥有由加强型碳纤维复合材料制成的镜子系统。
Rosat was an X-ray telescope mission and had a mirror system made of a reinforced carbon composite material.
这种细长梁由质轻但坚韧的碳纤维复合材料制成，负责承载引擎、起落架和机翼结构。
The long, slender beams that carry engines, landing gear and wing structure are made from light but tough carbon-fibre composites.
采用空间回路网法计算得到填充吸波泡沫的碳纤维复合材料格栅结构的电磁散射性能。
The spatial network method is used to calculate the electromagnetic wave scattering characteristic of carbon fiber composite grid structures filled with Absorbing foams.
进行碳纤维复合材料切削加工时，易产生各种加工缺陷，刀具磨损快，尺寸控制困难。
It is easy to produce a lot of machining defects for carbon fibre composite material in cutting processing. Tools wear quickly and it is hard to control size.
碳纤维复合材料管子是复合材料结构的基本元件，扭转变形是结构常见的基本变形形式。
Pipe of carbon composites is one of the basic components in composites structure, and torque deformation is one of the basic forms of the structure.
该材料由碳纤维复合材料构成，在热、气压或其他环境因素发生变化时，可改变到多种形态。
Made of carbon fiber composites, the materials shift between two or more shapes in response to changes in heat, air pressure, or other environmental factors.
碳纤维复合材料近年来也日益增多的用于汽车上，主要用作车身外板、车门、进气路管和活门盖等。
As technologies develop, in recent years, carbon fiber composites are also used in automobile, mainly as body panels, roof, door and inlettake, etc.
碳纤维复合材料近年来也日益增多的用于汽车上，主要用作车身外板、车门、进气路管和活门盖等。
As technologies develop, in recent years, carbon fiber composites are also used in automobile, mainly as body panels, roof, door and inlettake, etc.
应用推荐