... 延性断裂ductile fracture 脆性断裂brittle fracture 应力腐蚀开裂stress corrosion cracking ...
基于2个网页-相关网页
... British standard section英国标准型钢 brittle fracture脆性裂口、脆性断裂 brittle fracture initiation脆性断裂源 ...
基于1个网页-相关网页
brittle fracture stress 脆性断裂应力
brittle fracture strength 脆断强度
low stress brittle fracture 低应力脆断 ; 翻译
brittle fracture test 脆性断裂试验
brittle fracture initiation 脆性断裂源
resistance to brittle fracture 抗脆裂性
brittle fracture resistance 抗脆断强度
semi-brittle fracture 半脆性断裂
Tensile Brittle Fracture 拉伸脆性断裂
The hardness of the alloy is 64.5HV,ultimate tensile strength,yield strength and elongation are about 113.5,86MPa and 4.1% respectively. The fracture forms of the alloy is quasi-cleavage brittle fracture.
铸态合金的硬度为64.5 HV,室温抗拉强度为113.5 MPa,屈服强度为86 MPa,伸长率为4.1%;拉伸断裂形式为准解理脆性断裂。
参考来源 - 铸态MgCurve can be seen from the skeleton, and almost no drop in displacement curve above, which is brittle fracture.8.
由骨架曲线可以看出,力和位移曲线几乎没有下降段,属脆性破坏。
参考来源 - 夹芯墙体平面外结构分析研究Brittle fracture accident and countermeasure of the high-strength bolt of post junction of roof beam of the steel structure.
5.钢结构梁柱连接处高强螺栓的脆性断裂事故及对策。
参考来源 - 山西首幢高层钢结构住宅施工过程中关键技术问题研究·2,447,543篇论文数据,部分数据来源于NoteExpress
应用推荐