剪切强度(Shear strength)：也称抗剪强度，溧阳生料带，是指单位粘接面积上能够承受平行于粘接面积的最大载荷，溧阳生料带批发，常用的单位为MPa。
基于12685个网页-相关网页
...等。其显着的特征就是同一零件厚度一致。通过钣金工业加工出的产品叫做钣金件。不同行业所指的钣金件一般不同，多用于组配时的称呼。钣金件常见的力学强度有： 1、抗剪强度(shear strength) 是指试样剪断前，受剪部位原横截面积上所承受的大负荷。
基于1712个网页-相关网页
torsional shear strength 扭转剪切强度
cyclic shear strength [力] 循环抗剪强度
intrinsic shear strength [力] 内禀抗剪强度
tensile shear strength 拉伸剪切强度
interlaminar shear strength 层间剪切强度 ; 剪切强度
dynamic shear strength 动抗剪强度
longitudinal shear strength 拉伸剪切强度 ; 纵向剪切强度
( Lime fly ash is light in unit weight; high in shear strength and pull out coefficient, so it is an ideal fill material.
( 石灰粉煤灰自重轻、抗剪强度和拉拔系数高，因此石灰粉煤灰是理想的土工合成材料加筋土工程的轻型填料。
参考来源 - 土工合成材料加筋的试验研究和有限元分析The test research of shear strength of steel reinfOrcement high-strength con-crete short columns is carry out.
研究钢骨高强混凝土框架短柱的抗剪承载力。
参考来源 - 钢骨高强混凝土短柱及高强混凝土短柱力学性能的研究The test results show that the shear strength is obviously increased and the ductility of these beams is also improved.
试验研究表明，采用碳纤维布加固对提高钢筋混凝土梁的受剪承载力有明显的效果，并可改善钢筋混凝土梁的变形性能，增强其变形能力。
参考来源 - 碳纤维布加固钢筋混凝土梁受剪性能试验研究The relationship between the shear strength of bonding layer and its normal stress was expatiated under low hydrostatic stress-state.
并从破坏机理上分析了影响粘结层剪切强度的因素；及对低静水应力状态下，粘结层剪切强度与其上作用的正应力关系进行了阐述。
参考来源 - 老化病害混凝土结构质量评估及粘结加固中的基础问题研究Through laboratory tests and large on-site shear tests, studied the shear strength characteristics of the structure plane.
通过室内试验和现场大剪试验,研究了红层软岩结构面抗剪强度特性。
参考来源 - 红层软岩开挖边坡致灾机理及防治技术研究According to the calculated results, the influence of the main factors to the shearstrength of box-girder bridges including the shear strength, principal compressivestress of concrete and deformation is analyzed.
根据有限元模型计算结果，详细分析剪跨比、配箍率、腹板厚度对箱形桥梁的抗剪承载力、混凝土主压应力、腹筋应力等的影响。
参考来源 - 箱形桥梁抗剪性能数值分析及简化计算The data was statistically dealed with by SPSS 11.5 to analyze the difference of groups and the correlation of loading time and shear strength.
所得各组数据采用SPSS 11.5统计软件比较各组间剪切力的差异有无显著性,并对愈合时间和剪切力进行相关性分析。
参考来源 - 微型支抗种植体加载时机的动物实验研究Through the study of mechanical experiment, the uniaxial compression strength indices and shear strength parameters are put forward, which indicate that several typical soft rocks have strong aeolotropy, and that strength parameters are all very low.
通过多项力学试验研究,给出单轴抗压强度指标及抗剪参数,得出坝区几种典型岩组具有强烈的各向异性,其变形及强度参数均较低。
参考来源 - 软岩特性研究及其对边坡影响的敏感性分析·2,447,543篇论文数据，部分数据来源于NoteExpress
以上来源于: WordNet
N the degree to which a material or bond is able to resist shear 抗剪强度
The shear strength is equal to the cohesion of substance.
剪切强度等于物质的内聚力。
Result: Isogradient HA-coated implants had a greater average interface shear strength than the uncoated ones at each time span.
结果：术后每一时间段涂层植入体界面抗剪强度均显著高于非涂层者。
The formula of reduced shear strength coefficient of RC beams with inclined cracks is put forward to according to the test data.
根据试验数据提出了存在斜裂缝钢筋混凝土梁的抗剪强度折减系数的计算公式。
应用推荐