...烧结矿质量、烧结物料和热平衡及氧热利用、烧结过程的检测和自余控制及微机应用 铁矿石的处理方法_百科_搜搜钢4.烧结（sintering ）：到目前为止烧结仍是一种最重要而且是最经济的粉矿块状化方法；它不但有块状化的功能。而且有煅烧的作用。
基于4887个网页-相关网页
Selective Laser Sintering 选择性激光烧结 ; 选区激光烧结 ; 烧结技术 ; 技术
Selective heat sintering 选择性热烧结
direct metal laser sintering 直接金属激光烧结 ; 激光烧结 ; 直接金属粉末激光烧结 ; 烧结
sintering furnace [炉窑] 烧结炉 ; 烧结工艺设备 ; 加热使黏结炉
sintering of 铸砂烧贴 ; 烧结料 ; 铸砂烧掀
sintering machine 烧结机 ; 矿石烧结机 ; 带式烧结机
sintering temperature 烧结温度 ; 铌锑锆钛酸铅
sintering coal 炼焦煤 ; 粘结性煤 ; 焦煤 ; 烧结煤
Above 1450 ℃,liquid phase sintering became dominant and material shrank intensively.
高于1450℃,液相促进烧结起主导作用,材料大幅度收缩。
参考来源 - 南非红柱石细粉的烧结行为和莫来石化研究The results show the glaze surface has excellent metallic luster effect when the ratio of SiO2/Al2O3 is 10,the amount of nucleation agent is 5wt% and the amount of lead oxide is 40 wt%,and with the suitable sintering system.
实验结果表明:当SiO2/Al2O3比为10,析晶剂的含量为5wt%,PbO的含量为40wt%时,在合适的烧成制度下,釉面具有良好的金属光泽效果。
参考来源 - 配料组成对釉面金属光泽效果的影响Reuse of water purification sludge as silica material, with modulus (KH=0.91, IM=1.30, SM=2.37), the effect of the sludge on clinker sintering and properties of the clinker were studied.
1.利用杭州水业集团排放的污泥配料烧制水泥,KH=0.91,IM=1.30,SM=2.37,研究不同掺量对生料易烧性和熟料性能的影响。
参考来源 - 污泥替代硅质原料烧制水泥A series of experiments were carried out on Direct Metal Laser Sintering(DMLS) of 316 stainless steel powder.
采用直接金属激光烧结的方法,对316不锈钢粉末进行了一系列激光烧结实验。
参考来源 - 期刊学术社区The optimum preparation condition is as follows: reactant concentration is 0.25 ~0.3 mol-L"1, precipitator concentration is 0.2 ~ 0.4 mol-L'1, pH is 8~9, reacting temperature is 60~70癈, sintering temperature is 600癈.
反应适宜的条件为：反应物浓度为0.25～0.3mol·L~(-1)，沉淀剂浓度为0.2～0.4mol·L~(-1)，pH值为8～9，体系温度为60～70℃，焙烧温度为600℃。
参考来源 - 纳米CeOAdding trivalent transition metalions,reducing additives’ particle size and controlling the sintering schedule can significantly reduce the grain size,lower the porosity,increase the number of grain boundaries and enhance the grain boundary barrier,thus effectively improve the potential gradient of ZnO varistor.
采用三价过渡金属离子掺杂、减小添加剂粉料颗粒粒度以及控制合理的烧成制度,能明显减小晶粒尺寸,降低气孔率,增加晶界数目,提高晶界势垒,从而有效提高ZnO压敏电阻片的电位梯度。
参考来源 - 高电位梯度ZnO压敏电阻片的研究进展·2,447,543篇论文数据，部分数据来源于NoteExpress
以上来源于: WordNet
N a whitish porous incrustation, usually consisting of silica, that is deposited from hot springs 矿泉结石; 通常由温泉沉淀硅石构成
V to form large particles, lumps, or masses from (metal powders or powdery ores) by heating or pressure or both 烧结
Instead, "sintering" or "firing" is the process typically used.
作为替代，一般采用“烧结”或“焙烧”工艺。
His team at Loughborough University has invented a high-speed sintering system.
在Loughborough大学，他的团队已经创造了一套快速烧结系统。
Hot pressed sintering can shorten sintering time and be beneficial to attain nano grain size sintering materials.
热压烧结可以缩短烧结时间，有利于获得晶粒保持纳米尺度的烧结体材料。
词组短语
应用推荐