包晶凝固-学术百科-知网空间 研究不同的冷却方式炉冷(Furnace Cooling,FC)、空冷(Air Cooling,AC)和水淬(Water Quenching,WQ)对半固态 ... 详情>> 稀有金属材料与工程 2010年03期 Ti14钛合金
基于4个网页-相关网页
water quenching tank 淬火水槽
oil and water quenching tank 油水淬火槽
coke water quenching 湿法熄焦
solid-solution water-quenching 固溶淬火
Fine lath martensite can be obtained in the core part of the steel with diameters of 26 mm under 880℃(20℃water quenching)and 940℃(37℃water quenching).
淬火加热温度880℃(20℃水淬)及940℃(37℃水淬)热处理条件下,直径为26 mm的试验钢心部可获得细小的板条马氏体。
参考来源 - 新型大规格C级矿用圆环链用钢组织及性能研究Compared with 00Ni14Cr3Mo3Ti maraging steel, the Cr content of 00Ni13Cr9MoTi maraging steel increases from 3.19% to 8.92% so as to reduce Ms point to 60℃. So water quenching is needed before cold treatment 2h at -73℃.
和00Ni14Cr3Mo3Ti马氏体时效钢相比,00Ni13Cr9MoTi马氏体时效钢的Cr含量从3.19%增加到8.92%,使得Ms降到60℃,所以在770-1050℃固溶处理后水冷,并在-73℃冷处理2h,使γ→α转变时奥氏体尽可能多的转变成马氏体,以保证钢有足够高的强度。
参考来源 - 低Ni无Co马氏体时效钢强韧化研究·2,447,543篇论文数据，部分数据来源于NoteExpress
The performance and applying effect of the gelled material from the water quenching slag for backfilling are described.
介绍用于充填采矿的高性能水淬渣胶凝材料的性能及使用效果。
The processing technique of centrifugal grainy equipment and water quenching method for molten steel slag was studied in this paper.
本论文以液态钢渣为研究对象，研究液态钢渣的离心粒化设备水淬法处理技术。
Experiments for hot mold shell with isolated hot spot by local water quenching in investment casting before and after pouring were conducted.
对熔模铸件孤立热节热型壳进行了浇注前及浇注后局部水淬激冷试验。
应用推荐