浸润(Infiltration)即肿瘤细胞通过侵入和从血管中渗出并进入远隔器官的行为称为浸润。
基于6946个网页-相关网页
CeO2对2024铝合金显微组织和力学性能的影响 关键词:W70Cu;流动温压成形;形状复杂零件;熔渗 [gap=1381]Key words: W70Cu; warm flow compaction; complex shape part; infiltration
基于1728个网页-相关网页
浅谈化学实验教学中渗透德育教育--中国期刊网 关键词】化学实验教学;渗透;德育教育 [gap=414]Key words】Chemistry experiment; Infiltration; Moral Education
基于1431个网页-相关网页
...:物理;渗入;人类生活;各个领域;科学意识; 科学学习方法;科学 关键词 方思维式 [gap=380]Key words physics;infiltration;the life of man;filds;scientific consciousness;sencientific learning method;sci...
基于422个网页-相关网页
-
浸润
- 引用次数:1686
参考来源 - VCAM
侵袭
- 引用次数:52
In contrast,the expression of TIMP-1 and P-27 was in negative with tumor’s infiltration and metastasis and in positive with patients’ prognosis.
TIMP-1、P-27表达水平与肝门胆管癌侵袭转移能力呈负相关,与患者预后呈正相关。
参考来源 - MMP
-
入渗
- 引用次数:566
Averaged water infiltration rate of sandy soil is greater as compared with Lou Soil.
与嵝土相比,砂土水分入渗平均速率更快。
参考来源 - 土壤水汽热溶质耦合运移数值模拟研究
渗流
- 引用次数:6
Water soluble anionic polyacrylamide (PAM)has been used for various agricultural purposes due to its effects on minimization of surface water run-off, soil erosion, soil sealing, stabilization of soil structure, reduction of bacteria and nutrients in wastewater, and enhancing infiltration.
水溶性阴离子聚丙烯酰胺 (PAMs) ,因其影响土壤的分散、结絮和团聚作用 ,稳定土壤的结构和提高土壤的渗流 ,使得土壤地表水的径流、土壤侵蚀和板结程度降低到最小 ,已被应用于不同的农业目标来有效地控制土壤侵蚀、保护地下水水质和显著地降低动物废弃水中的细菌和养分含量。
参考来源 - 影响聚丙烯酰胺在土壤和水分管理应用的因素
-
浸渗
- 引用次数:98
The interfacial reactions enhance the wettability and promote the spontaneous infiltration process.
界面反应的存在提高了润湿性,促进了自发浸渗的进行。
参考来源 - 无压浸渗法制备Al
熔浸
-
渗滤
- 引用次数:73
Land infiltration systems have an effective treatment on pollutants.
8.土地毛管渗滤系统对生活污水具有较好的处理效果。
参考来源 - 复合填料床渗滤系统对城市生活污水处理效果的研究
渗漏
- 引用次数:6
When the precipitation is 180mm and soil nitrate content level is 55-206 N mg/kg, the nitrogen loss from infiltration is 13-49 times that from runoff.
对农田氮素流失而言,在降水量为180mm,土壤硝态氮含量水平为55-206N mg/kg的条件下,渗漏方式下氮素的流失量远高于地表径流方式下的氮素流失量,两者相差可达十倍到数十倍以上(13—49倍)。
参考来源 - 模拟降雨研究水网地区农田氮磷的流失
渗透
-
浸渗
- 引用次数:8
An infiltration technique is commonly used for the fabrication of B4C–Al composites. The wetting of molten B4C by molten Al is of crucial importance in producing the composites.
碳化硼-铝复合材料的制备通常采用浸渗法,而首先要解决的是一个关键问题是两者间较差的润湿性。
参考来源 - B
渗滤
- 引用次数:1
When the infiltration velocity increases from 0.159 m/h to 0.318 m/h, the leaching velocity coefficient increases from0.03132 h~(-1) to 0.04383 h~(-1). The result is according with the experimental data.
当渗滤速度为0.159m/h、0.318m/h时,浸出速率常数分别为0.03132h~(-1)和0.04383h~(-1),金属充分浸出开始到进入液所需的时间由297.528h降为218.997h。
参考来源 - 杂卤石溶采过程溶解平衡预测与柱浸模拟实验
-
下渗
- 引用次数:11
参考来源 - 期刊学术社区
渗入
- 引用次数:1
参考来源 - 杭州西溪湿地景观格局研究分析
渗透
入渗
渗滤
-
浸渍
- 引用次数:3
参考来源 - 模板法制备煤基管状C/C复合膜气体分离性能的研究
-
浸润
-
渗透战斗;渗透活动
渗透
-
熔渗
-
浸润
渗入
-
下渗
·2,447,543篇论文数据,部分数据来源于NoteExpress