安全帽注塑模具设计及模腔三维造型CAD/CAM_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词：安全帽；注塑模；CAD/CAM。 [gap=722]Key Words: safety helmet; injection mould; CAD/CAM.
基于1438个网页-相关网页
塑料挂钩座注射模具设计-注塑模具类-木哥机械资料商城[机械毕业设计|论文] 关键词：挂钩座；注塑模具；计算机辅助设计 [gap=467]Key words: plastic pothook; injection mould; CAD
基于1259个网页-相关网页
洗衣机水管接口塑料模具的设计_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词：注射模;侧向抽芯;管接头 [gap=1300]Keywords : injection mould;core-pulling;union.
基于740个网页-相关网页
卡通饮水机底座产品完善及注射成形模具设计-机械设计制造及自动化论文-收费论文 关键词：注射模具；UG软件；模具设计；饮水机； [gap=1104]Key words：injection mould；UG software；mould design；drinking fountains；
基于74个网页-相关网页
plastic injection mould 注塑模 ; 注塑模具 ; 塑料注塑模具 ; 塑料
injection mould for thermoses 热固性塑料注射模
injection mould for thermoplastics 热塑性塑料注射模
plastic injection mould machine 注塑机 ; 注射机
injection mould design 注塑模具设计 ; 注射模设计 ; 模具设计 ; 注塑模设计
injection mould engineer 注塑工程师
Insert Injection Mould 带五金件塑料模具
By the use of Pro/E software,the injection mould for automobile locked-lid was designed reasonably.
合理地设计了汽车内饰件锁扣盖注塑模具。
参考来源 - 汽车锁扣盖注塑模具设计The process of injection mould design and analysis with CAD/CAE software was stated by an example. Feed route of side cavity in processing was designed based on MasterCAM,and its manufacture process was simulated.
通过实例,阐述了采用CAD/CAE软件进行注射模设计和分析的过程,并运用MasterCAM对该结构件侧型腔模进行了加工刀路设计,模拟其加工过程。
参考来源 - 基于Pro/EThe structure and working process of an injection mould for moulding a centralized piping port and a cover lid were stated after an analysis on the forming process and technological characteristics of the products.
通过对中心管件与盖件2个塑件的工艺分析,介绍了注射成型模具的结构及工作过程。
参考来源 - 基于UG的中心管件与盖件注射模设计The injection mould standard part, common part and standard injection mould base libraries were designated with parametrical modeling technology to reduce the repetitive work time and shorten design cycle.
通过参数化建模,进行标准零件库、常用件库及标准模架库的开发,减少花费在重复性工作上的时间,从而达到缩短注塑模具设计周期的目的。
参考来源 - 基于混合优化算法的注射模具参数优化研究·2,447,543篇论文数据，部分数据来源于NoteExpress
应用推荐