设计了本文的柔性结构二维微位移器。
The micro-displacement machine of two dimensions was designed.
机器人微操作手设计采用压电伸缩陶瓷微位移器。
Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.
压电陶瓷驱动电源是压电陶瓷微位移器的关键部件。
Power supply is the key component in micro piezoelectric actuator's application.
压电陶瓷驱动电源是压电陶瓷微位移器应用中关键部件。
Power supply is the key component in micro piezoelectric actuator "s application."
在一些实施例中，所述电平位移电路包括时钟电平位移器。
In some embodiments, the level shifting circuit includes a clocked level shifter.
为今后利用此类检测设备进行微位移器性能的研究奠定了基础。
Those work established groundwork for using this kind of equipment to study micro-displacement machine character for the future.
线性位移器将检测到的卷径增大所移动距离信号反馈给伺服电 机。
The movement distance single detected by the linear shifter and caused by the increasing of the roll diameter is fed back to the actuating motor.
系统控制方面，通过单片机系统产生四路信号，经驱动电源直流放大后加载到压电陶瓷微位移器上。
As to controlling system, the four-channel signals from MCU are output to DC amplifier to be amplified and then loaded to PZT platform.
压电陶瓷驱动电源是压电陶瓷微位移器的关键部件，国内外已有大量研究，多采用分立器件，电路复杂。
The power supply is the key components of piezoelectric ceramic actuators. There are a lot of researches about its power supply, most of which has a complex circuit.
第三章对压电陶瓷微位移器的驱动机理和特性进行了理论分析，实验测试了WSYD型和WTDS型压电陶瓷驱动器的特性。
In chapter 3, based on theoretical research of the actuation mechanism, the characteristic of the WSYD and WTDS actuators are tested.
实际应用结果表明，以优化参数制作的压电陶瓷微位移器，在其伸长量、轴向刚度及频响范围等性能指标上可提高约20～30%。
Practical application results show that the actuator which is made up by optimum parameter is improved by about 20%—30% in its deforming length, axial stiffness and bandwidth.
如果生命存在，科学家们希望这个行星上的光线能够嵌入大气层分子的化学指纹位移指示器，像氧气、甲烷一类的气体。
If life exists, scientists expect the planet's rays to be embedded with tell-tale chemical fingerprints of atmospheric molecules, such as oxygen and methane.
该文应用傅里叶光学原理对扩展光源照明下光栅的成象特性作了分析，并由此设计出一种新型的光栅成象型位移传感器。
Basedg on Fourier optical principle, the imaging property of grating illuminated by expansion source is analysed in this paper. Hence an innovative grating imaging displacement sensor is designed.
本文将讨论微型CMOS电视摄像机作为图像传感器在实时光电位移测量时的处理电路及性能分析。
This paper discusses the processing circuit and features of the CMOS miniature camera used as a graphic sensor in the real time photoelectric displacement measurement.
这些位移传感器是由粗糙的不锈钢构造而成，且能够承受高温或振动等恶劣的环境。
These displacement transducers are ruggedly constructed of stainless steel and able to withstand harsh environments where high ambient temperature or vibration is present.
测量中使用了光纤位移传感器，对衰减与位移的关系进行了动态测量。
A displacement optical fiber sensor was used for dynamic measuring the relationship between attenuation and displacement.
因此，传统栅式位移传感器制造工艺复杂，加工要求很高，相应地制造成本也很高。
Therefore, machining technics is complex and requirement is high, which cause the cost of machining is high.
所设计的传感器稍作改动，也可以用来测量其他形式的线位移或角位移。
And the designed sensor can also be used to measure some other types of linear displacement or rotation Angle.
通过对某电涡流位移传感器位移、电压用多项式拟合曲线的特点进行分析，经过试探发现该传感器曲线可转化为直线。
The curve of an eddy current displace sensor can be converted into a line by analysing the character of the curve obtained by polynomial fitting.
运用双位移传感器构成的系统可有效地测量塑料与金属配副时塑料的磨损量。
The twin displacement transducer system can measure effectively the wear of plastic against metal pairs.
针对二相混合式步进电机固有的特点，对其作为连续角位移测量传感器进行了深入的研究。
In this paper, the study for the two-phase hybrid stepper motor as a position sensor is investigated.
介绍了一个设计性实验—利用反射式光强位移传感器工作特性曲线上升沿的线性区测量纸张厚度。
The thickness of paper is measured using the linear area of the characteristic curve of an optic-filter sensor.
提出一种通过时间来测量位移的方法和原理，依此原理研制了新型的位移传感器。
A new method to the measurement of displacement by using a time interval is presented, and a new type of sensor is made on the basis of these principles.
本文探讨了位移传感器几种不同的安装方式，并通过六辊轧机位移传感器的安装结构说明了内装位移传感器的优越性。
This article approaches the different installing methods of the position transducers and explains the advantages of the inner-installation of position transducer.
目的研究位置敏感传感器在位移测试中的优化应用。
Aim To research the optimization of the application of PSD in displacement measurement.
介绍了一种新型的电感式位移传感器。
A new type of inductance displacement transducer is introduced.
针对板材剪切与冲裁加工的特点，设计了一种应变片式位移传感器。
A displacement sensor of strain foil is designed aiming at the sheet shearing and blanking processes.
给出了几种运用光位移传感器对线性位移检测的基本原理和方法，并通过实验对传感器测试性能、应用进行分析。
Several basic principles and methods of using the optical sensor to measure the displacement are presented, and the property and application of sensor is analyzed by experiment.
其中电感式传感器是目前动态测量中用途较广的一种位移传感器。
And the inductance sensor is one kind of position transmitter widely used in the present dynamic measurement.
其中电感式传感器是目前动态测量中用途较广的一种位移传感器。
And the inductance sensor is one kind of position transmitter widely used in the present dynamic measurement.
应用推荐