This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
As a numeric analysis method, the finite element method has been becoming a more and more important action in analysis of gear transmission system.
有限元方法作为一个强有力的数值分析工具，在齿轮传动系统的分析中起到了越来越大的作用。
Dynamic analysis of structure through combining the finite element method with the experimental mode is a practical reliable and effective modern method.
试验模态分析与有限元计算相结合的研究方法是一种实用、可靠的结构动态分析的现代方法。
Using the synthetic method of both finite element and modal analysis searches after a basic way of dynamic Safety design.
采用有限元数值模型与实验模态分析相结合的方法，寻求动力安全设计的基本方法。
This paper presents a direct finite element method for analysis of dynamic soil-structure interaction. It can be performed by use of the large general structure analysis software.
本文给出结构-地基动力相互作用分析的一种直接有限元方法，可以依托大型结构分析软件完成结构-地基动力相互作用研究工作。
In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.
为检验车架结构分析的有限元模型，通过一具体车架的刚度试验，总结出一套实用的车架刚度试验方法。
The finite element method is a very effective numerical analysis method to extremely complex engineering structure.
有限元法是分析复杂工程结构的一种非常有效的数值分析方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
The satisfactory results are obtained by using concrete calculative examples, A new method is provided to carry out finite element stress analysis for different modulus material.
经过实例分析计算，获得了满意的结果。为对这类材料的结构进行有限元应力分析提供了一种新方法。
The frame of a new style motorcycle named Sport Recreation Vehicle (SRV) was researched. Using the finite element mode analysis method, the vibration mode of motorcycle frame was analyzed.
以一新型运动型多功能休闲摩托车车架为研究对象，采用有限元模态分析的方法，对车架振动模态进行了分析。
This paper presents a effective method dealing with step elastic supports in structural finite element analysis by inducing elastic support stiffness and structural displacement support matrices.
本文通过引入弹性约束刚度矩阵和结构位移约束列阵，提出了结构有限元分析中处理阶跃型弹性约束的一种有效方法。
In this paper, Finite Element Method (FEM) is applied to the dynamical analysis on a three-axis turntable and a resonance model is built for bandwidth design purpose.
本文用有限元方法对三轴转台控制对象进行动力学分析，建立机械谐振的频域模型，为带宽设计提供了依据。
A hyper finite element method applied to the structural analysis of shear wall is presented which is a new numerical method used for analyzing large scale complicated structure.
提出了一种用于剪力墙结构分析的超级有限元方法。超级有限元法是一种用于分析大型复杂结构的新的数值方法。
Using a spatial composite finite element method, combining three-dimensional solid element and bar element, the mechanical analysis of a two-span curved PC continuous box girder bridge is conducted.
采用三维实体单元和杆单元相结合的空间组合有限元方法，对一座两跨曲线预应力混凝土箱形连续梁桥进行空间受力分析。
Based on image processing technology, a method of geometric modeling is presented for two dimensional finite element analysis of asphalt mixture.
提出了一种基于图像处理技术的沥青混合料二维有限单元分析的几何建模方法。
Authors suggest a practical method based on dynamic analysis of finite element for modifying natural frequencies of hull grillage beam, and its software is completed.
提出一种基于有限元结构动力分析的船体板架固有频率实用修改方法，并进行了软件设计。
In this paper, a composite grid method (CGM) for finite element (FE) analysis of an electromagnetic field with strong local interest is proposed.
本文描述了对有需要着重分析的局部区域的电磁场进行有限元分析的复合网格法。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
This provides a foundation for the analysis of the stochastic seepage with stochastic finite element method.
为应用随机有限元方法对随机渗流进行分析提供了理论依据。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.
采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。
This paper describes a finite element method analysis of an acoustically transparent planar PVDF hydrophone.
本文介绍了一种透声面元PVDF水听器的有限元分析方法。
Based on Gurtin type variational principle a finite element method for initial value problems is presented by functional analysis. It is used for problems of beams dynamics.
从卷积型变分原理的泛函出发，通过分析泛函中的各项，推导出求解动力响应问题的时-空有限元法，并将其应用于梁的动力问题中。
This paper introduces a numerical analysis of semi-conductor devices by using the finite-element method combining with the coupled approach and the design of a corresponding modelling program.
本文采用有限元分析与耦合法相结合的方法对半导体器件进行数值分析，设计了相应的模拟程序；
应用推荐