Then, a numerical calculation method about installing positions of dampers on transmission lines by calculating the weighted amplitude ratio isp.
为更好地控制架空输电线的微风振动，研究防振锤安装位置的优化计算方法是非常必要的。
Based on the theory of cylindrical particle diffraction, a numerical calculation method that can be used to measure non spherical particles is presented.
以柱形颗粒的衍射理论为基础，提出了适用于非球形颗粒衍射模型的数值计算方法。
The paper presents an introduction to a numerical calculation method of the steam flow field and heat transfer performance ot condensers, accompanied by the analysis of a calculated example.
介绍凝汽器汽相流场与传热特性的数值计算方法及算例分析。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
A kind of direct numerical calculation method for the steady-state analysis of PWM inverter-fed induction motor drives was presented.
本文介绍一种脉宽调制型(PWM)逆变器异步电机变频调速系统稳态分析的直接数字计算方法。
So, numerical calculation technology of electromagnetic field and imploring a novel calculation method are great value subject.
因此，电磁场的数值计算技术，探索新的计算方法，是一个很有价值的课题。
In this study, a suit of formula for mining overburden bed separation volume calculation was developed based on numerical simulation using cube shape curve regression method.
文章的研究基于数值模拟，采用三次样条曲线回归方法，推导出一套计算采动覆岩离层量大小的公式。
The Boundary Element method (BEM) is a new method of numerical calculation.
边界元法是一种新的数值计算方法。
This paper presents the numerical simulation method and calculation results for the flow around a high lift devices of airplane.
本文给出了飞机增升装置气动力特性的数值计算方法和计算结果。
A method of design for the turbine alternator with side intake ducts based on numerical calculation of three-dimensional flow-filed was built.
提出并研究了基于三维流场数值计算的引信用侧进气涡轮发电机的设计方法。
A numerical matrix method for calculation of optical resonator modes with media inside is proposed.
提出了一种计算有源腔模式分布的有限元数值矩阵方法。
A numerical calculation of enhanced heat transfer efficiency of LFT is finished in this paper by the boundary element method.
本文运用边界单元法对低肋管的强化传热效能进行了数值计算。
Finite formulation method, also named after cell method, is a novel electromagnetic field numerical calculation method.
有限公式方法，又称元胞方法，是一种新型的电磁场数值计算方法。
This paper presents a numerical calculation with finite difference method for supersonic flow of ideal gas over bent cones.
本文给出了绕弯曲头锥理想气体超音速流动差分数值计算方法。
The paper presents an analysis and comparison on the resistance characteristics of a 2 000 TEU container ship by using the ways of experience method, spectrum method and numerical calculation.
本文分别采用经验法、图谱方法和数值计算方法对2 000TEU集装箱船阻力性能进行分析，并对结果进行了对比。
MC simulation method is a numerical calculation technique founded on probability and statistics theories.
MC方法是以概率和统计学的理论、方法为基础的一种数值计算方法。
Two typical numerical examples shoaled that the method is more general and requires much less calculation time to reach a desired accuracy.
两个典型的计算实例表明，本文提出的光线方程数值解法是一个较为普遍而节省计算时间的方法。
Iterative method is a basic method of numerical calculation, acceleration for iterate is a target.
迭代是数值计算中最基本的方法，迭代的加速一直是人们追求的目标。
The method for correction of singular points of wells and the calculation method of well row replaced by a ditch in the numerical FEM and FDM computations were proposed in this paper.
对有限元和有限差分的数值计算提出了井孔奇点修正和以沟代井列的计算方法，从而提高了离散化网络的计算精度，并可简化取代三维问题为二维。
To achieve the purpose, we have developed a calculation method of numerical simulation and the ways on how to use the method to simulate a model of the area source properly.
采用数值模拟计算的方法，对面源模式做了实际计算，并将其计算结果与虚点源后置法做了分析和比较。
The method is a numerical solution of multi-component chemical equilibrium flows with the elements distributing equations and thermodynamic calculation of chemical equilibrium.
首先引入了元素的分布方程，然后根据化学平衡的热力计算方法求解每一位置的组分及温度。
The BEM is a new method of numerical calculation compared with other methods. It has many advantages, such as smaller order of equation, less data input, less internal storage and faster velocity .
边界元法是一种新的数值计算方法，与已有的其它数值方法相比，具有方程组阶数低、输入数据少、占有内存少、速度快等优点。
This paper deals with a field modulated magnetic gear and its calculation with the finite element method, and provides a powerful numerical technique for designing magnetic gears.
在电机设计时，使用有限元方法对一种大力矩磁力齿轮——磁场调制式磁力齿轮进行了磁场计算，为设计该磁力齿轮提供了有力的工具。
Simulation examples of integral show the algorithm is a validated method with high precision and powerful self-adapting. The algorithm has value in numerical calculation and engineering practice.
数值积分算例表明，该算法得到的积分值精度高，自适应强，是一种有效的数值积分方法，在数值计算和工程实际应用中具有一定的参考和应用价值。
An improved numerical model and calculation method for stability simulation of a novel type of a pulse tube refrigerator.
第一部分给出了脉冲管制冷机数值模拟的基本方程和改进的数值计算方法。
Described in this paper is the calculation of hydrodynamic coefficients of submarine horizontal stabilizing fin -rudder assembly by a numerical method of finite elementary solution.
本文用有限基本解方法计算潜艇水平稳定翼与舵组合体的流体动力系数。
A new numerical method for the solution of multi-component chemical equilibrium flows by the elements distributing equations and thermodynamic calculation of chemical equilibrium was introduced.
提出了一种新的方法来计算多组分化学反应流场。它首先引入了元素的分布方程，然后根据化学平衡的热力计算方法求解每一位置的组分及温度。
A pulsed solenoid magnet, which is applied for direct measurement of magnetocaloric, is designed by classical electromagnetic method and finite element numerical value calculation method.
采用经典电磁场、有限元数值计算两种方法，设计了一种用于磁热效应直接测量的脉冲螺线管磁体。
Thus, the present study in the field, has become a mainstream method of numerical calculation, among which the finite element method is the method used most often.
因而，目前在该领域的研究中，数值计算成为了主流方法，其中又以有限单元法为使用得最多的方法。
Thus, the present study in the field, has become a mainstream method of numerical calculation, among which the finite element method is the method used most often.
因而，目前在该领域的研究中，数值计算成为了主流方法，其中又以有限单元法为使用得最多的方法。
应用推荐