Cell adhesion experiments have shown that titanium surface is more bioactive for initial bone bonding after anodic oxidation.
细胞黏附实验显示,经阳极氧化后的钛表面生物活性提高,骨结合能力增强。
TA2 pure titanium implant material could possess abundant color by anodic oxidation in sodium glucoheptonate electrolyte, which would enhance its decoration and functionality.
TA2型纯钛植入材料在葡萄糖酸钠电解液中阳极氧化可得到丰富的色彩,增强了钛植入体的美观性和功能性。
The anodic oxidation of lead sulphate is well known.
而硫酸铅的阳极氧化反应则是众所周知的。
Pulse current technique was adopted in hard anodic oxidation of aluminum alloys.
提出将脉冲技术应用于铝合金硬质阳极氧化。
So we have to improve the wear-resistance of the rotor by hard anodic oxidation.
聚氨酯鞋底与普通橡胶鞋底相比,它具有质量轻、耐磨性能好等特点。
Through the anodic oxidation, the porous coating on titanium materials has been achieved.
通过阳极氧化法,在钛合金表面制备了多孔形貌的涂层。
99% high purity aluminum reflector, anodic oxidation treatment, high reflection efficiency.
采用99.99%高纯铝反射器,阳极氧化处理,反射效率高。
The mechanism of photoresponse during the anodic oxidation of Pb electrode was investigated.
研究了铅电极在阳极氧化过程中光响应的产生机制。
Objectives: To study the oxide film of pure titanium implant material treated by anodic oxidation .
目的:研究阳极氧化对纯钛种植材料氧化膜的影响。
It is shown that the tip induced oxidation process can be considered as electrochemical anodic oxidation.
实验说明针尖诱导氧化过程可被认为是电化学阳极氧化过程。
The hardness of anodic oxidation layer is higher, the tribological property of composite coating is better.
阳极氧化层的硬度越大,复合膜摩擦学性能越好。
The anodic oxidation process of aluminum in sulfuric acid was investigated using constant voltage electrolysis method.
采用恒电压电解法研究了铝在硫酸中的阳极氧化过程。
The present paper Outlines that the surface area of sintered porous metal for valve can be measured by anodic oxidation.
本文提出了用阳极氧化法测定阀金属烧结多孔体的表面积。
Methods:The surface of pure titanium specimen was modified by a compound method of pre-anodic oxidation and hydro-deposition.
方法:采用预阳极氧化及水热沉积复合法对纯钛试件进行生物改性。
This series LED is used for indoor and outdoor lighting, the light body using high quality aluminum, surface anodic oxidation process.
此系列LED用于室内室外照明,灯体采用高质量铝材,表面阳极氧化处理。
The paper introduces the theory of the hard anodic oxidation and the technological process of the hard anodic oxidation of the rotor...
简单介绍了硬质阳极氧化的工艺原理及转杯硬质阳极氧化的工艺流程和工艺装备。
This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.
用电极电势、能斯特方程式和超电势等,论述了铝板的阳极氧化机理。
Meanwhile the mechanism of the anodic oxidation treatment to improve the interfacial property of composites is obtained by analyzing the results.
同时通过实验结果分析,阐明阳极氧化处理使复合材料界面性能改善的机理。
A hard anodic oxidation technique of forge aluminum alloy LD7 for piston was studied. The prescription and parameters of the technique were set up.
对铝合金LD 7硬质阳极氧化工艺进行了研究,提出了适合ld 7铝合金的工艺配方与工艺参数。
The influence of technology of anodic oxidation on the physicochemical properties of rare earth Al-Mn alloy electrolytic coloured membrane is recited.
本文叙述了阳极氧化工艺对稀土铝锰合金电解着色膜物理化学性能的影响。
This paper studied a new technique for gathering coloration and occlusion to one step on the surface of porcelain anodic oxidation of aluminium alloy.
研究了在铝合金瓷质阳极氧化膜层表面进行染色、封闭一步处理的新工艺。
The different degradation pathways of o-chlorophenol were revealed in the anodic oxidation and the cathodic reduction through chromatographic analysis.
通过色谱分析简单揭示了邻氯苯酚在阳极氧化和阴极还原中的不同降解路径。
Thus the anodic oxidation was performed at a constant voltage in an oxalic acid solution using highly pure al as the anode and platinum net as the cathode.
采用高纯铝作阳极,铂网作为阴极,在草酸溶液中进行恒压阳极氧化。
The anodic oxidation and electrolytic colouring of 6063 aluminum alloy containing rare earths in solutions of sulfuric acid and stannous sulfate are studied.
本文系在硫酸、硫酸亚锡溶液中对添加有稀土的6063变形铝合金进行了阳极氧化和电解着色。
This text expatiated the craft parameters, technique main points and matters needing attention of anodic oxidation and dye black for aluminium and its alloy.
本文主要阐述了铝及铝合金阳极氧化与染黑色工艺参数、技术要点及注意事项。
The hardened anodic oxidation coating on sewing machine components(2A12)was investigated in different sulfuric acid density solutions with special apparatus.
采用自制脉冲恒流电源,研究了缝纫机零部件(2A12)在低硫酸浓度下的脉冲恒流硬质阳极氧化工艺。
The hardened anodic oxidation coating on sewing machine components(2A12)was investigated in different sulfuric acid density solutions with special apparatus.
采用自制脉冲恒流电源,研究了缝纫机零部件(2A12)在低硫酸浓度下的脉冲恒流硬质阳极氧化工艺。
应用推荐