• The resulting increased bearing load shortens bearing service life.

    由此引起的轴承载荷的增加会缩短轴承的使用寿命。

    youdao

  • The ultimate bearing load of the pile is used to calculate its buried depth.

    根据桩的极限承载力来计算桩的入土深度。

    youdao

  • This class will be mainly used for withstanding radial bearing load, can withstand certain axial loads.

    该类轴承主要用以承受径向负荷,也可承受一定的轴向负荷。

    youdao

  • It is known that in plane finite element calculation the bearing load must be transformed into force of nodal.

    在平面有限元计算中,必须把轴承负荷转为节点力。

    youdao

  • If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated.

    如实际负荷为径向和轴向复合负荷,则必须计算当量轴承静负荷。

    youdao

  • Planar bearing load cell designed particularly is used to alarm for travelling crane overload.

    特殊设计的平面承载式传感器,专用于天车过载报警。

    youdao

  • The time effect of the bearing load of column foundation is that the bearing load increases with the lapse of time.

    桩基础承载力随着时间推移呈逐渐增大的趋势,这就是桩基承载力的时间效应。

    youdao

  • The maximum load that can occur on a bearing should be used in the calculation of the equivalent static bearing load.

    应使用轴承可能承受的最大载荷计算轴承当量静载荷。

    youdao

  • For this account, the author provides a simplified method for estimating the bearing load of a single row diesel engine.

    为此,本文作者在研究了有关文献后,提出了单列式柴油机轴承负荷快速估算法。

    youdao

  • If transition at the shaft collar of a circular shaft adopting closed Angle will bring biggish stress concentration as bearing load.

    圆轴轴肩处若采用尖角过渡,承载时将引起较大的应力集中。

    youdao

  • These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").

    除轴向负荷外,此类轴承还能承受一定的径向负荷(见“当量轴承动负荷”)。

    youdao

  • The external wall of a warehouse is a reinforced concrete two-way slab which has one simply supported end and three fixed ends, bearing load of triangle.

    堆场类建筑的外墙一般按照三边固定一边自由的混凝土双向板,板承受荷载为三角形荷载。

    youdao

  • The counterweight is installed on the crankshaft for reducing the bending moment on it, but it will influence the magnitude and distribution of the main bearing load.

    曲轴上平衡重的安装减小了曲轴所受的弯矩,但也影响了主轴承载荷的大小和分布。

    youdao

  • Aiming at the importance of the elastomer, based on the ANSYS, the thesis has realized the structure optimization design of the elastomer of two-dimensional bearing load cell.

    针对传感器弹性体的重要性,本文应用有限元分析软件ANSYS对二维轴承载荷传感器弹性体进行了结构优化设计。

    youdao

  • Producing little stretch distortion and having no flection under permitted air speed and pressure are the criterions of assessing air conduit capacity based on its bearing load.

    基于风管所承受的各种荷载来评定其工作能力,通常在允许的气流速度(或压力)下,是否只产生较小的弹性变形,而不产生屈曲。

    youdao

  • Slab-column structure assembled by monolithic prestressing is a type of structure system in which prefabricated reinforced concrete slabs and columns are main members bearing load.

    装配式整体预应力板柱结构是采用预制的钢筋混凝土楼板和柱作为主要的受力构件,通过整体张拉预应力钢筋而形成的板柱结构体系。

    youdao

  • The replacement ratio is the main factor for the increase of proportion of pile bearing load, and the main way is to raise the replacement ratio of piles and the size of the pile cap.

    置换率是桩体承担荷载比例大小的主要因素,提高桩体承载比例的主要途径是提高桩的置换率,增大桩帽面积。

    youdao

  • This method utilizes some of non-dimensional parameters and combined parameters, in order to interrelate the bearing load with parameters of working process and structure of a diesel engine.

    本方法是利用了一些无因次参数及综合参数,使轴承负荷同柴油机工作过程及结构的某些参数联系起来。

    youdao

  • The results show that guide bearing load of large vertical water pump has something to do with inlet passage of pump station, pump unit manufacture and installation quality, structure pattern.

    研究结果表明:大型立式水泵导轴承荷载与进水流道和机组制造安装质量、结构形式有关。

    youdao

  • Based on the equivalent theory of statics this paper presents an accurate numerical method and accurate numerical formulas for calculating the bearing load distributed by cosine curve law are derived.

    本文根据静力学完全等效原理提出一种精确数值解法,并对余弦分布的轴承负荷转为节点力的解法作了具体的数学推导,得出了精确数值计算公式。

    youdao

  • And based on this way, the elastic-plastic ultimate bearing-load capacity of Dongjiang Bridge in largest cantilever stage and finished stage were assessed.

    并依此方法对东江大桥最大悬臂阶段及成桥阶段的弹塑性极限承载力进行了评估。

    youdao

  • Meanwhile, they were located in the traffic arteries and were the lifeline of national economy. So their reliability and the ultimate bearing-load capacity are quite important in service period.

    同时地处交通要道,交通流量大,是国民经济的命脉,因此它们施工阶段及服役期间的可靠性及极限承载能力至关重要。

    youdao

  • The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.

    介绍复合材料承力接头设计的相关理论及应用状况,包括设计基础、结构形式、强度分析、相关试验等。

    youdao

  • The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.

    介绍复合材料承力接头设计的相关理论及应用状况,包括设计基础、结构形式、强度分析、相关试验等。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定