Superhuman mental powers, including his extraordinary sense of hearing and blazing speed-reading, are as vital to Superman as his bullet-beating velocity and steel-bending strength.
超人的精神超能力，包括他拥有的听觉超能力和阅读超能力，就像他拥有的可以躲避子弹的速度和折断钢铁的力量一样至关重要。
The carrying capacity of a reinforced concrete slab under concentrated load depends on its bending strength and punching strength.
集中力作用下钢筋砼板的承载力取决于板的抗弯强度与冲切强度。
Practice shows that the laser treatment of hard metals surface can significantly increase the product's bending strength and wear resistance.
并通过实际应用，证实了激光表面强化处理具有使硬质合金制品的抗弯强度、耐磨性能大为提高的显著效果。
The ultimate bending strength of rigid beam-column connections is a key point ensuring structural safety of earthquake-resistant frames under major earthquakes.
梁柱刚性连接的极限承载力是保证强震下抗震钢框架安全性的关键要素之一。
The use of polypropylene fiber in concrete of the bridge deck paving can improve its tensile strength, bending strength, permeability strength, impact ductility, cracking resistance and toughness.
在桥面铺装层混凝土中掺用聚丙烯纤维能够增强其抗拉、抗折、抗渗、抗冲击能力，并起到阻裂增韧的作用。
Stiffness: It is a measure of the bending strength of paper and board.
挺度：挺度是衡量纸和纸板耐弯曲的强度性能。
The forming pressure has no obvious effect on the bending strength of the composite.
成型压力对反应浸渗材料的强度影响不大。
Additionally, the fracture surfaces of bending strength specimen were also explained.
此外，还对抗弯强度试样的断口进行了分析。
The hardness, the fracture toughness and the bending strength of the composites were tested.
对热压烧结后材料的硬度、断裂韧性和抗弯强度进行了测试和分析；
It is found that the bending strength of gauge glass increases when the temperature decreases.
随着温度降低，玻璃板的抗弯强度测定值增加。
However, the research on the bending strength of large module gear tooth root is scarce until now.
但是，目前对大模数齿轮弯曲强度的研究还比较少，因此研究大模数齿轮轮齿弯曲强度具有重要意义。
Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.
应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。
The mechanism of bending strength increased by bauxite chalmette and the process were investigated by XRD and SEM.
利用XRD、SEM等测试手段，对熟铝矾土提高瓷坯抗弯强度的机理和生产工艺进行了研究。
The proper quantity of water selected may increase the static bending strength and decrease the transfiguration of plates.
选择合适的水分可以提高板材静弯曲强度，减小板材变形。
Within certain temperature range, the bending strength of wood and plastic composites reduces with the temperature power-up.
在一定温度范围内，木塑复合材料的抗弯性能随温度的升高而降低。
Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。
The tensile strength and bending strength of gas-assisted molding automobile handle were compared with conventional injection molding.
并对汽车把手件气辅成型制品和传统注塑成型制品的抗拉强度和抗弯强度进行了比较。
The effect of the sintering temperature and the mullite content on the dielectric properties and the bending strength has been studied.
研究了烧结温度和莫来石含量对复合材料的介电性能和抗弯强度的影响。
The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.
测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；
The results show that porosity is a linear function of graphite content and that bending strength is an exponential function of porosity.
结果表明：孔隙度与石墨含量呈线性关系，抗弯强度与孔隙度呈指数关系。
The dry density, bending strength and compressive strength of foam concrete block increased with the increasing of the amount of fly ash.
粉煤灰加入量增加，泡沫混凝土砌块的干密度递增，抗折和抗压强度增大。
The results show that steel fiber reinforced ferroconcrete t beam possesses high bending strength and excellent crack resistance property.
结果表明，钢纤维增强钢丝网混凝土T形梁具有较高的正截面抗弯强度和良好的抗裂性能。
PEI 5% in the content, the composite material has better mechanical properties, bending strength increase by 28.0%, impact strength 26.1%.
在PEI含量5%左右时，复合材料的综合力学性能较佳，弯曲强度提高了28.0%，冲击强度提高了26.1%。
Based on the experiments of the 12 SRC flexural members, the stiffness, crack width and ultimate bending strength of the SRC beams are analysed.
本文以12个型钢钢筋混凝土(以下简称SRC)梁受弯试验为基础，对SRC梁的刚度、裂缝宽度和受弯承载力进行试验研究和理论分析。
The measuring technique of tensile strength of ceramics is usually sophisticated, but it is easy for us to measure the bending strength of ceramics.
陶瓷材料抗拉强度的测试技术一直是个难以解决的问题，而抗弯强度的测定则已经较成熟且简便。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
The stress shielding rate, bending strength of different directions and torsion strength of the three different fixation methods were measured and compared.
然后对三种固定方法对固定骨段的应力遮挡率、不同加载方向的弯曲强度和扭转强度进行测试。
The results show that the dry density, bending strength and compressive strength of foam concrete block decreased with the increasing of the amount of foam.
研究结果表明：泡沫加入量增加，泡沫混凝土砌块的干密度逐步减小，抗折和抗压强度递减。
Microwave Sintering, as a new aspect on the study of ZTA ceramics, improves the bending strength and the fracture toughness KIC of ZTA and the micro structure.
选用微波烧结新工艺，对ZTA陶瓷力学性能进行了研究，获得了较传统烧结工艺优良的陶瓷力学强度和断裂韧性。同时，新工艺改善了陶瓷体的显微结构。
The microstructure examined by SEM and TEM indicates that the increase in bending strength is found to be dependent on the load shift from matrix to the whisker.
用SEM和TEM观察了材料的显微结构，指出弯曲强度增加是由于荷载从基体转移到晶须。
应用推荐