本文导出了内泵浦方式下管状固体激光器的非均匀发热量和温度分布。
Inhomogeneous thermal power density and temperature distribution of inside-pumped solid-state tube lasers have been derived in this paper.
由于光泵浦热效应，高功率固体激光器的输出参数如光束远场发散角、输出功率等会发生变化。
The output parameters such as beam divergence angle in far-field output power of high power solid state lasers are variable due to thermal effect of optical pumping.
面泵浦固体激光器（即板条式激光器）、半导体二极管泵浦固体激光器和激光加工是这份报告的重点。
The report emphases on face-pumped solid-state lasers(or slab solid-state lasers), diode laser pumped solid-state lasers and laser material processing.
本文介绍了二极管泵浦固体激光器的优点及其应用，特别是它在强激光武器和激光聚变方面的应用前景。
This article describes the advantages and applications of the diode pumped solid state lasers (DPSSL), especially its future applications to the powerful laser weapons and the laser fusion.
本课题主要是针对LD泵浦固体激光器的高重复频率的电光调q系统的研究与设计。
The topic of this article mainly research and design about LD pumped solid laser high repetition frequency Q-switch system.
用LD-SLA来代替传统的LD来泵浦固体激光器也有很大的发展前景。
There are also great prospects in pumping solid laser instrument with LD-SLA instead of traditional LD.
脉冲铒YAG固体激光电源为氙灯提供能量，氙灯是激光的泵浦源，它燃烧发光激发工作物质铒YAG产生激光，因此激光电源的性能直接影响到激光光束的质量。
Power supply system provides flash energy to Xe lamp. Pumping of Er:YAG laser rod is provided by Xe lamp. Pulse solid laser power directly affects the attribute of laser.
该热稳定腔可应用于大功率半导体泵浦固体激光器，有效消除腔内的热透镜效应，在激光大功率输出时保证激光器性能稳定可靠。
The thermally-stabilized resonance cavity can be used in high power diode-pumped solid state laser, it can eliminate thermal-lensing and ensure the laser performance stability and credibility.
重点分析了高功率LD阵列泵浦的固体激光器热效应问题，提出了LD阵列与激光介质分别水冷的方案来解决高功率全固态激光器的热效应问题。
The method of individually water cooling of the LD array and the laser crystal is giver after analyzing the thermal effect of high power LD pumped solid-state laser.
采用铟-铌材料组件对超小型泵浦固体连续激光器的功率稳定性进行改良。
The effect of indium-niobium modules on improving the power stability of microminiature diode-laser was studied.
二极管泵浦固体激光器（DPL）输出光束的方向在某个微小范围内存在随机变化，这种光束指向性的波动在某种程度上严重制约了DPL的应用。
The output beam of diode pumped solid-state laser(DPL) has minute random variation in direction, which results in the restrictions on the appliance of DPL.
以半导体激光泵浦-固体激光器为激发光源，采用共聚焦光学结构，研制了一种小型化激光诱导荧光检测器。
Based on confocal configuration, a laser-induced fluorescence detector using laser diode double-pumped solid-state laser (LD-DPSSL) as excitation source is described.
研究提高铟组件超小型泵浦固体连续激光器的抗冲击性能方法。
Study on the advance methods of improving the indium module microminiature Diode-Laser's resistance of impact.
其中LD泵浦的全固体蓝绿激光器是国际上众多家机构花重金争相开展的科研项目。
First of all , LD-pumped All-solid-state blue and green laser is now the scientific project which most national department have spent much money to study in .
LD泵浦固体激光器出现使激光器得到飞速发展，但是其在大功率运行时所表现出的强烈的热透镜效应，严重影响了激光器的稳定性和输出光的模式、光束质量。
Laser techniques is surging with LD-pumped solid-state laser. But, the stability, model and beam quality of the laser are strongly affected by the thermal lens effect at high power.
本文研究了脉冲固体激光器的YAG激光棒光泵浦动态热效应对激光波面的影响。
The influence of dynamic thermal effect induced by optical pumping of YAG crystal rod in a pulsed solid laser on the wave front of the output laser beam is studied in this paper.
本文提出了一种测量端面泵浦固体激光器热致损耗的方法。
In this paper, a method for measuring thermally induced losses in highpower end-pumped solid-state lasers has been proposed.
大功率激光器阵列的重要应用是泵浦固体激光器。
High power laser diode array is mainly used as the pumping energy source for solid state laser.
在二极管泵浦固体激光器耦合光学系统中，柱面透镜起着非常重要的作用。
The cylindrical lens ACTS as an important role in the coupled optical system of DPL.
大口径激光二极管阵列的高效泵浦耦合技术是高功率二极管泵浦固体激光系统急需解决的关键技术之一。
High-efficient coupling technology is the key technology of the high power diode-pumped solid state laser systems.
分析和比较了各种类型的二极管泵浦固体激光器，并给出了它们的最新进展。
Then it analyzes and compares a variety of DPSSL, and presents their recent progress.
分析了对固体激光介质热效应有重要影响的工作物质、泵浦源，研究了热透镜产生的原因。
We research the issue of heat effect in the laser medium, analysis the work of substances, pump source, the cause of thermal lens which has an important impact on solid-state laser medium heat effect.
激光二极管泵浦的高重复频率调Q固体激光器在激光通信、光存储、打标、焊接和测距雷达等方面已经获得了广泛应用。
The high repetition rate LD pump Q-switch solid state laser has been widely used in a lot of fields, such as the laser communication, optical storage, marking, welding and ranging radar.
本文详细介绍了一台最大输出功率为37w的二极管侧面泵浦连续固体激光器。
With a diode maximum output power 37w CW a diode side pumped solid state Nd: YAG laser is presented in this paper.
对固体激光器的灯泵浦和二极管泵浦方式进行了比较，详细分析了不同类型的固体激光器所适用的泵浦方式。
In this paper lamp pumping and diode pumping for solid-state lasers are compared. The different forms of pumping for different sorts of solid-state lasers are analyzed in details.
和连续激光器一样，对于脉冲泵浦固体激光器，利用其输出能量(功率)表达式，得到了输出镜最佳反射率的一般表达式。
The general expression of the output mirror optimum reflectivity is derived by pulse-pumped solid - state laser output energy (power), as known for CW laser.
采用椭圆柱泵浦灯的固体激光器椭圆柱聚光腔属于固体激光器技术领域。
A solid laser elliptic cylinder photospot chamber adopting an elliptic cylinder pumping lamp belongs to the technical field of a solid laser.
已知调Q二极管端面泵浦的固体激光器的输出参数而要求所对应的激光器的谐振腔参数和泵浦参数，被称为调Q二极管端面泵浦的固体激光器的反向设计。
Solutions to the resonator parameters and pump parameters of Q-switched end-pumped DPL according to the given laser outputs are termed as backward design of lasers.
已知调Q二极管端面泵浦的固体激光器的输出参数而要求所对应的激光器的谐振腔参数和泵浦参数，被称为调Q二极管端面泵浦的固体激光器的反向设计。
Solutions to the resonator parameters and pump parameters of Q-switched end-pumped DPL according to the given laser outputs are termed as backward design of lasers.
应用推荐