请注意看那些不大的接触区域(齿牙上暗灰色的点)。
Notice the small area of contact (dulled gray spot on tooth).
它由砂轮的转速及接触区域的液体薄膜的厚度决定。
The value is determined by the grinding wheel speed and the fluid film thickness within the contact zone.
由于接触区域内有足够金存在，接触电阻变化趋势比较平稳。
The contact resistance is stable because of enough gold accumulating in the contact area.
在测试时流过接点的电流过大也能使接触区域发生细微的物理变化。
Excessive current through the contacts during testing can cause a physical change in the contact area on a microscopic level.
它还有着更大的前景：鼻腔是大脑与外部世界唯一接触的直接接触区域。
Even bigger: the nasal cavity is the only area where the brain meets the outside world.
研究了盘型件双面辗压成形过程，分析了辗压头与坯料各接触区域受力状态。
Process of rolling forming from both side of disk type parts has been studied with analysis of forces applied to rolling head and each contacting zone on billet.
第一电极位于预成型偏向部分上，设置将检测或激励提供给第一心肌接触区域。
A first electrode is located at the preformed biased portion and is arranged to provide sensing or stimulation to the first myocardial contact area.
过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。
The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.
微通道蒸发器包括微通道管，其促进微通道管和结冰表面之间的接触区域中的分布冷却效果。
The microchannel evaporator includes a microchannel tube that facilitates a distributed cooling effect in a contact area between the microchannel tube and the ice-forming surface.
辊锻工艺由于旋转的模具与辊锻件之间的接触区域在不断变化，一直以来成为数值模拟的难点。
Due to the contact areas between dies and work piece varying in forming, the simulation for this process is very difficult.
根据试验观察，提出了一种模拟预应力钢索与索道孔壁接触区域和接触压力的简单、实用的方法。
A simple and practical method was proposed to simulate the contact region and the contact pressure between the prestressed tendon and the wall of ropeway.
讨论了当植入时用于检测或激励第一心肌接触区域和不同的第二心肌接触区域的导线装置和方法。
Lead assemblies and methods for sensing or stimulating a first myocardial contact area and a distinct, second myocardial contact area when implanted are discussed.
此外，对农业工程机械中的密封提出反装油封产生微泄漏，以形成对唇口接触区域清洗作用的设想。
In addition, an imagination of using the reverse setting of oil seal to produce the microleakage inord er to make clean the lip contact region using in the agricultural construction Mach...
第二电极位于第一电极远端的导线体上并与其间隔，设置将检测或激励提供给不同的第二心肌接触区域。
A second electrode is located on the lead body distal to, and spaced apart from, the first electrode and is arranged to provide sensing or stimulation to the distinct, second myocardial contact area.
在该方法中，接触开口(17)形成在导体层(4)中，其相互位置与元件(6)的接触区域(7)的相互位置对应。
In the method contact openings (17) are made in the conductor layer (4), the mutual positions of which correspond to the mutual positions of the contact areas (7) of the component (6).
在此之后，至少在接触开口(17)中以及在元件(6)的接触区域(7)形成导体材料，将元件(6)与导体层(4)连接。
After this, at least in the contact openings (17) and the contact areas (7) of the component (6) a conductor material is made that connects the component (6) to the conductor layer (4).
在此基础上建立了求取齿轮副传动误差和齿面接触点的数学模型，提出了分析齿轮传动误差和接触区域的仿真算法，并编制了相应的计算程序。
On the basis of it, the mathematical models of driving error and contact point are set up, then the emulation algorithm is put forward and the program is worked out.
计及作用于接触斑点上的切向力，通过比较作用于接触斑点上的法向弹性载荷与法向塑性载荷，确定了区分弹性接触与塑性接触区域的临界接触斑点面积。
Considering the tangential force applied on a contact spot, the critical area demarcating the elastic and plastic regimes is obtained by comparing the normal elastic load with the normal plastic load.
计及作用于接触斑点上的切向力，通过比较作用于接触斑点上的法向弹性载荷与法向塑性载荷，确定了区分弹性接触与塑性接触区域的临界接触斑点面积。
Considering the tangential force applied on a contact spot, the critical area demarcating the elastic and plastic regimes is obtained by comparing the normal elastic load with the normal plastic load.
应用推荐