热性能测试表明，该类化合物液晶相变区间较宽并具有较高的清亮点。
The results of thermal analysis show that these compounds have broad nematic phase range and high clearing point.
论述了自行研制的FRY型服装热性能测试仪的测量原理和结构特点。
The measure theory and structure characteristic of FRY clothing thermal property apparatus are discussed, which developed by ourselves.
设计了机油冷却器传热性能测试系统的硬件部分，编写了流量数据的采集和通信程序。
Secondly, it designs the hardware of the oil cooler heat transfer test system and compiles the programs of the flow data collection and communication.
涂膜隔热性能测试结果表明，该种微胶囊具有明显吸热性能，可作为隔热添加剂使用。
The measurement of coating within the microcapsules proves the heat insulation property, and the microcapsules can be used as heat insulation additive.
介绍一种地源热泵地下埋管换热性能测试装置及测试方法，并对该装置的用途进行了分析讨论。
This paper introduces an testing method and testing equipment for the performance of heat transfering of pipes buried under ground in a ground source heat pump system.
本文通过工程实际应用及保温隔热性能测试、比较，证明绝热反射膜是一种特别适于墙体和屋面保温的新型建筑材料。
The heat insulating and reflective film was approved to be a new building material especially suitable for wall and roof insulation by insulation test and actual project application.
复合材料的力学性能和耐热性能测试结果表明，适量有机粘土的加入能使其拉伸强度和维卡软化点均较纯聚氯乙烯有较大提高。
The experimental results show that tensile strength is enhanced with the increasing adding of the appropriate organoclay. However, the mechanical property is damaged with the too high clay conte…
本文通过对相变材料热性能测试及分析，选用高温相变材料TH576为蓄热介质，它具有相变潜热大、导热性能好、原材料易得等优点。
The high-temperature phase change material TH576 is chosen as the thermal energy storage material by testing and analysing its thermal performance.
采用温度调制式DSC技术（简称ADSC） ，研究了聚酯热性能的测试方法。
The thermal properties of polyesters were studied by temperature modulated DSC (ADSC).
阐述了地源热泵地埋管传热性能的测试原理，并与热响应测试原理相对比。
The heat transfer performance test of ground heat exchanger was presented and compared with thermal response test.
用DSC测试了配合物的热性能。
采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。
The test results showed that the base of the raw material of the booster steering oil pump stock tank of Fukang car of Shenlong Co.
对复合材料进行热性能、结晶形态及微观形态测试分析。
The thermal behavior, crystalline morphology and micromorphology of the composite were tested and analyzed .
对该复合材料进行了力学性能，热性能和熔体流动性的测试。
The composite material to the mechanical properties, thermal properties and melt flow of the test.
用DSC测试了配合物的热性能。
研究了热熔黏合纤维的热性能，改进了非织造布服装领衬（领底呢）的加工过程，测试和分析了领衬物理机械性能和染色性能。
To start with, studied the thermal quality of the thermofusible fiber, then improved the process of clothing collar lining with non-woven fabric.
经过实验，讨论各种因素对织物防辐射热性能影响的规律。为高性能热防护纤维及其织物提供了较好的测试方法及评价标准。
The affection of various factors to this property was discussed by experiments, which supplys a good testing method and evaluation standard to high property heat protective fibers and fabrics.
同时对冷板的散热性能进行了测试，得到了冷板的平均换热系数和压力损失。
At the same time, the average heat exchange coefficient and the pressure loss of the cold plate have been tested.
通过动态升温测试试验和织物保温性能试验来对动态热性能进行分析。
Dynamic heat transmitting properties of fabrics and warmth retention testing methods have been developed;
搭建实验台，测试导热塑料盘管蓄冰槽的传热性能，通过实验结果与理论结果的比较来验证数学模型；
An experimental apparatus is built up to study its heat transfer characteristics and to verify the numerical model.
对各种正装和倒装焊功率型LED芯片的表面温度分布进行了直接测试，对其散热性能进行了分析。
The temperature distribution of power LEDs is measured, and the performance of thermal dispersion is discussed.
本文介绍了一种以工控机为核心的内燃机机油冷却器传热性能自动测试系统。
In this paper, an automation testing system of engine oil cooler heat transfer capability based on industry computer is introduced.
通过力学测试、DSC、DMA和SEM等分析，研究了聚乳酸和淀粉在不同质量配比下，复合材料力学性能、热性能、吸水率的变化，并研究了增容剂环氧树脂对复合材料性能的影响。
The changes of mechanical, thermal properties and water absorption of blends were analysed with mechanical test, DSC, DMA and SEM. The influence of epoxy resin in blends was also studied.
镀层的显微硬度、耐热性等性能进行了测试。
The properties of microhardness and heat resistance were tested.
对不同工况下不同浓度和配比的CTAC减阻流体在二维流道中的减阻性能和传热性能进行了试验测试。
Drag reducing performances of Cetyltrimethyl Ammonium Chloride (CTAC) drag reducing fluid in two-dimensional channel under different experimental situations were measured.
通过对管壳式换热器现场测试工作进行总结，提出了管壳式换热器的传热性能的热工检测方法与校核计算方法。
Based on the on - site testing of the pipe - shell heat exchanger, ways to test and check - up the heat transfer property of the pipe - shell heat exchanger are suggested int...
在去离子水、乙醇、二甲苯三种介质中的沸腾传热测试表明表面多孔管具有优良的强化沸腾传热性能。
Porous surface tubes exhibited excellent performance in enhancing boiling heat transfer, with the deionized water, ethanol and xylene as the working fluids.
在去离子水、乙醇、二甲苯三种介质中的沸腾传热测试表明表面多孔管具有优良的强化沸腾传热性能。
Porous surface tubes exhibited excellent performance in enhancing boiling heat transfer, with the deionized water, ethanol and xylene as the working fluids.
应用推荐