New method of wavelength accuracy calibration in Optical Spectrum Analyzer is introduced, its principle and implementation are described.
本文介绍了光谱分析仪波长准确度校准的一种新方法，详细阐述了其原理及具体实现。
High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters, controllers or recorders.
高精度校正功能模拟在使用温度计校准精度热电偶输出，发射器，控制器或录像机。
The micro Angle error between optical coordinate and mechanical datum coordinate of robot vision instrument due to mechanical assembly can be corrected by high accuracy calibration.
机器人视觉仪器由于机械安装引起的光学坐标系与机械基准坐标系之间的微小的角度误差可以通过高精度标定修正。
Second, device after calibration of pressure gauge, to check the accuracy of the work pressure gauge.
二是装置经过校验的压力表，以便核对工作压力表的准确度。
Responsible for site instrument management, including procedure establishing, calibration management, to ensure its accuracy and compliance with regulation of local and corporation.
负责工厂的仪表校正管理，包括制定相关程序，日常校验管理，确保其精确度并符合国家和公司的规定。
Since the ultimate measuring accuracy is limited by the accuracy of calibration, a new method of calibration is proposed in this paper.
由于测量的精度最终要受到标定精度的限制，本文引入了一种新的标定方法。
The accuracy grade of novel HVEM must be defined by integrated error calibration system.
新型高压电能表必须采用整体误差校验系统来定义准确度等级。
Experimental results show that the proposed method has a quite high accuracy of calibration.
实验结果表明，所提方法具有较高的定标精度。
The actual accuracy of an optical measurement system is due to the calibration accuracy. The calibration methods should possess the property of convenience and dependability.
线结构光的标定精度直接决定了测量系统的实际测量精度，而标定方法又直接影响着测量系统使用的方便性和可靠性。
The actual accuracy is due to the calibration accuracy. Calibration methods affect the convenience and dependability of an optical measurement system directly.
系统的标定精度直接决定了系统的实际使用精度，而标定方法又直接影响着视觉测量系统的使用方便性和可靠性。
Swing shaft test bench is used to test alignment, calibration and accuracy of system under simulating swing condition in laboratory.
摇晃轴试验台是在实验室模拟摇晃条件下，对被试系统进行对准、标校及精度试验的一种装置。
Software calibration method is used to increase measuring accuracy and reliability.
采用软件校正，提高了测量精度和整机的可靠性。
The error depends on the calibration accuracy of the amplitude response.
这种方法的误差取决于幅频特性曲线的标定精度。
In dynamic structure testing, the accuracy of measurement data relies significantly on the calibration quality of measurement channels.
在结构动力学试验中，测量通道的校准质量直接影响测量数据的精度。
As a basic guarantee of thermal instrumentation accuracy, thermal instrumentation calibration quality has an important impact on production safety.
作为热工仪表准确性的基础保障，热工仪表的校验质量对生产安全有着重要的影响。
By offline calibration for the coordinate measurements device, the measurement accuracy is promoted.
通过对坐标测量装置的离线刻度，提高了测量精度。
Use amplifiers, receivers must consider the level and burned compression level to take appropriate measures calibration, in order to improve measurement accuracy of the system.
采用放大器，就必须考虑接收机的烧毁电平和压缩电平，采取适当的措施进行校准，以便提高系统测量准确度。
Large range course Angle measurement system of medium-to-high accuracy was studied for the course Angle calibration of vehicle dynamic base.
研究用于飞行器等动态基座航向角校准的大范围、中高精度航向角度测量系统。
Correcting the distorted image of camera in calibration process of fringe projection measurement system that can effectively improve the calibration accuracy of system.
在条纹投射测量系统的标定过程中对摄像机畸变图像进行修正，能有效地提高系统的标定精度。
To improve the measurement accuracy of the thermometer, the calibration for different ambient temperature and the correction of ambient temperature compensation are presented.
并在实验基础上提出了采用分段标定及对环境温度补偿结果进行修正的方法，提高了测量精度。
It has both the accuracy of photogrammetric calibration and the flexibility of self-calibration.
该方法既具有摄影测量学的精确性，同时也具有自定标算法的灵活性。
And it emphatically demonstrates the basic principle of centrifugal calibration, error analysis, points for attention and achievable accuracy.
着重说明了离心校准法的基本原理、误差分析，以及注意事项和可达到的精确度。
A complete solution assembles the transmitter, sensor and thermowell together for improved calibration and accuracy.
一个完整的解决方案，组装发射器，传感器和热电偶改进校准和准确性在一起。
For higher accuracy and resolution, the calibration of high-precision digital thermometer has a higher requirement to its standard instrument, supporting equipment, environmental control and so on.
高精密数字测温仪因准确度和分辨力较高，对校准所用的标准器及其配套设备、环境控制等都有较高的要求。
This method decreases the number and values of error factors, improves the test accuracy and efficiency, also makes the calibration procedure be performed automatically by program.
该方法减少了误差因素，提高了测试精度，而且使在轨测试系统的校准由程序自动执行，提高了测试效率。
An analysis of factors influencing the calibration accuracy is done based on the experimental process and results.
根据试验的过程和结果，分析了影响标定精度的因素。
This paper discusses the dependence of the absolute calibration accuracy on the characteristics of the switch used in the equipment for calibrating calorimeters.
本文讨论了激光能量计绝对定标装置中所采用的开关特性对定标精度的影响。
By using motion selection, the bad effect of small rotations and the degenerate motions such as pure translations will be removed and the accuracy of online hand-eye calibration be improved.
通过该方法，可以避免随机运动序列中存在的小角度运动以及纯平移一类的退化情况对标定精度的影响，得到符合手眼标定精度的要求。
By using motion selection, the bad effect of small rotations and the degenerate motions such as pure translations will be removed and the accuracy of online hand-eye calibration be improved.
通过该方法，可以避免随机运动序列中存在的小角度运动以及纯平移一类的退化情况对标定精度的影响，得到符合手眼标定精度的要求。
应用推荐