All versions feature analog voltage or current outputs.
所有版本的功能模拟电压或电流输出。
A new analog voltage contact-less switch circuit is designed.
设计了一种新型模拟电压可切换无触点开关电路。
All Series 40l flowmeters provide analog voltage outputs proportional to flow for computer use.
所有40l系列的流量计提供与流量相称的模拟电压输出，以供计算机使用。
This paper discusses several problems to be considered in order to accurately measure voltage with analog voltage meter.
本文介绍了用模拟指示电压表实现准确测量电压需要注意的几个问题。
This is accomplished by providing internal voltage reference for each of the quanta into which the analog voltage range is divided.
该转换器的实现原理是，为每一份量值为输入模拟电压除以的电压提供一个内部参考电压。
Optional models: Analog Voltage controlled models. Dual function models, selectable input for either translator or phase shifter operations.
可选型号：模拟电压控制模式，双功能模式，转换器和移相器操作有可选输入。
The circuit can output analog voltage signals with positive and negative polarity according to the phase relation of encoder signals of orthogonal output type.
它可以根据正交输出型编码器信号的相位关系，输出具有正负极性的模拟电压信号。
The transfer function of the analog voltage regulator is converted into discrete time mode, so that the corresponding digital control algorithm can be obtained.
文中将模拟调压器的传递函数进行数字化，得到了可以应用于数字调压器的控制算法。
The second selected element selects one of the second groups of voltage references as an output analog voltage according to N-M least significant bits of the N-bit digital signal.
第 二选择单元依据N位数字信号的N-M个最低位，选择第二组参考电压之一作为输出模拟电压。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
In this case, the data provided is the voltage experienced at the instant of the request on analog pins 3, 4, 5, and 6.
在本例中，所提供的数据是该请求瞬间在模拟管脚3、4、5和6上所经历的电压值。
The Arduino is an inexpensive, adaptable, and programmable open source microprocessor that can read data input in the form of voltage at its analog pins.
Arduino是一种经济的、可调节和可编程的开源微处理器，可读取其模拟插脚处的电压形式的数据输入。
Analog pin voltage readings seem to depend critically on the voltage of the power supply to the Arduino.
模拟管脚电压读数紧密取决于Arduino的供电电压。
In mix signal circuits, digital circuits operate at a lower voltage and analog circuits at a higher one, so as to meet the requirement of power dissipation and performance.
在混合信号电路中，考虑到功耗和性能的要求，数字电路低电压工作而模拟电路高电压工作；
An analog maximum power point tracking (MPPT) controller integrated circuit (IC) based on open-circuit voltage method was proposed to enhance the photovoltaic conversion efficiency of solar cell.
为提高光伏电池的光电转换效率，设计一种基于开路电压法的光伏电池最大功率点跟踪(MPPT)控制芯片。
Therefore, it is significant for analog circuits to operate at the same low supply voltage as digital circuits.
因此，将类比电路操作在与数位电路同样的低电压下更是重要的。
Voltage reference is one of the most important cells in analog circuit.
基准电压源是模拟电路中的一个重要单元。
Many practical amplifiers chain together a series of analog amplifier stages to obtain a high overall voltage gain.
许多实际的放大器将多个放大器级联起来，以获得较高的电压增益。
In particular to such a circuit that directly digitizes analog battery cell voltage levels into associated digital signals.
特别涉及一种直接把电池电压模拟信号数字化成相关数字信号的电路。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
The system can be used to analog signals of frequency, voltage, current simultaneously etc. Meanwhile it can be used to detect precision of the meters.
该系统能够同时模拟频率类、电压类、电流类等多种信号，还能同时检测电子仪表的精度。
The voltage of the analog signals in control and protection circuits are all below DC 24V.
控制和保护回路模拟信号的电压都低于24V直流。
Reference sources are widely used in analog and mix-mode circuits, such as A/D, D/A converters, voltage regulators, measurements, instrumentation circuits, and bias circuits.
基准源模块广泛的应用于模拟和混合电路中，如A/D、D/A转换器，电压调谐器，电压表，电流表等测试仪器以及偏置电路。
Any change in the excitation voltage results is a change in the analog input voltage seen by the ADC.
任一变化在励磁电压的结果是由模数转换器在模拟输入电压。
By flexible design of the parameters, the circuit can satisfy different requirements of output voltage, and it is excellent solution for many analog isolation problems.
通过参数的灵活设计，可以满足不同的输出电压隔离要求，应用于不同的模拟信号隔离场合。
The data processing interface of voltage interface mud logging unit is composed of analog boards, this interface matches voltage sensor, but it isn't compatible with current sensors.
电压型接口综合录井仪其数据处理接口部分由模拟电路板组成，这种接口与电压型传感器匹配，但与电流型传感器却不兼容。
Bandgap reference voltages are important analog circuit blocks. It can provide a nearly constant reference voltage which is stabilized over process, power supply and temperature variation.
带隙基准电压源之所以是模拟电路中重要的模块，是因为它能够提供近似恒定的参考电压，这个电压不随温度，电源电压，工艺的变化而变化。
Calculation results show that the many parameter losses of importance for analog recording existed in the reproducing voltage.
计算结果表明，再生电压的幅值中包含着许多重要的记录损失参数。
Thus a prior art SAR converter USES a binary search method to determine a digital equivalent of the analog input voltage.
因此，现有技术的SAR转换器使用二进制搜索方法来确定模拟输入电压的数字等效。
Thus a prior art SAR converter USES a binary search method to determine a digital equivalent of the analog input voltage.
因此，现有技术的SAR转换器使用二进制搜索方法来确定模拟输入电压的数字等效。
应用推荐