In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.
在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Through the analysis of testing results of orthotropic steel deck under more loading cases, actual stress in deck is presented.
通过对多工况下正交异性板测试结果进行分析，说明桥面板的实际应力情况。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The thought of this paper is to discuss on and analysis to dynamic response of HSMS under impact load, and estimate its mean life based on noted stress fatigue design method.
本文的主导思想是讨沦和分析冲击载荷下螺旋弹簧质量系统的动态响应，并应用名义应力疲劳设计方法估计其平均寿命。
A model for fatigue reliability analysis of structural members under random stress time courses is proposed.
提出了一种随机应力时间历程作用下构件疲劳可靠性分析的新模型。
The basic fatigue failure characteristics have been analyzed according to the stress analysis and simulation test under inhomogeneous swallowtail between compressor disk and blade.
分析了非均匀接触下燕尾形榫头连接的应力状态，并借助于模拟试验，提出了非均匀接触导致疲劳破坏的基本痕迹特征。
The finite element analysis (FET) software ANSYS have been used to simulate the temperature and stress distribution in stacked die package under power load.
应用有限元分析软件ANSYS，模拟功率载荷下叠层芯片封装中各层的温度和应力分布。
The stress freezing under a uniform pressure, slicing and stress analysis are performed on the model.
然后将模型在危险载荷作用下，进行应力冻结、切片及应力分析。
MCSAP program was applied to the finite element analysis for the stress and deformation of a high-speed Gleason spiral bevel gear under centrifugal load.
使用修改移植的MCSAP有限元分析程序对某高速弧齿锥齿轮进行了离心载荷下的变形和应力的分析。
Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states.
在详细分析试验和有限元计算结果的基础上，提出了复杂应力状态下的低周疲劳寿命模型。
Based on the elastic stress analysis, the stresses of the hoop fiber reinforced steel pressure vessels (compressed natural gas bottle) under internal pressure are obtained.
用弹性理论分析方法，得到了环向纤维增强钢压力容器(压缩天然气气瓶)在内压作用下的应力。
Rock cutting by a step ped bit has been studied with experimental stress analysis and is tested under atmospheric pressure.
本文用平面光弹方法，对阶梯金刚石钻头切削刃下岩石的应力进行分析。
Stress and strain of elastic beam under inertial load was analyzed, and modal analysis of elastic structure was figured out.
分析了在惯性载荷作用下的弹性梁的应力及应变，并对弹性结构进行了模态分析。
Based on the universal finite element analysis software ANSYS, a spatial model of the bridge is built and the stress distribution under the live load on main sections is analyzed.
利用大型通用软件ANSYS建立结构空间有限元分析模型，分析活载作用下各控制截面的应力分布规律。
Through the analysis of finite element example, we can see that the stress and deformation situation of buildings has improved significantly under the action of earthquake.
通过有限元算例的分析，可以看到在地震作用下建筑物的受力状态和变形情况有所明显改善。
This paper mainly analysis the holes technics of the Expansion Pin stress Coining and the principle of the stress holes, discuss the lifetime under different condition by fatigue test.
本文主要分析孔的挤胀销棒应力压印工艺特点，挤压孔的受力机理分析，并通过疲劳试验观察不同条件下的寿命。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
对螺纹槽管进行了疲劳强度计算，并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
Through theoretical analysis of rheological properties of frozen soil, the logarithmic creep equation of frozen clay is established under complex stress state.
通过对冻土的流变特性进行理论分析，建立了冻黏土在复杂应力状态下的对数型蠕变方程。
The stress field analysis showed that the cleavages formed under horizontal, S-N trending compressive stress.
应力场的分析表明，劈理构造由近南北向的地壳水平挤压应力作用形成。
The finite element analysis of truss system with interval parameters under interval load is studied and the structural interval displacement and stress response are deduced.
构建了区间参数杆系结构在区间荷载作用下的分析模型，导出了结构的区间位移和区间应力响应区间变量表达式。
A new type of clutch flywheel needs to determine the limited strength under high centrifugal stress. Finite element analysis and burst spin tests of the flywheels has been done.
为确定一种离合器飞轮新产品在大离心力作用下的总体强度储备，对飞轮在离心力场及配合应力作用下的应力分布作有限元分析，并进行了超速破坏试验。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
The paper has also made analysis of the characteristics of the rock mass shear strength under high normal stress.
分析了高正应力条件下岩体抗剪强度的特征。
Through static, modal and crack stress intensity factor analysis, the vibration stress of blade under rotating state before fracture can be calculated out finally.
然后采用有限元数值计算方法对叶片进行静力分析、模态分析及裂纹应力强度因子计算，最后反推出叶片在旋转状态下振动应力值的大小。
This paper presents the parametric equations on stress concentration factor(SCF) of completely overlapped tubular joints under axial loading using experimental and numerical analysis.
通过试验和数值研究推导了完全叠接管节点试件在轴向力作用下应力集中因子的参数方程。
In the analysis of the elastic tripping of the stiffener, the critical stress under this mode of failure is derived by using the energy method and the principle of least potential energy.
对于加筋板中筋的侧倾失稳，则通过能量法推导加强筋侧倾失稳时的总势能泛函，利用最小势能原理求解出此失稳模式下的临界应力。
Based on the failure analysis of the fracturing pump valve chamber, a model for calculating its reliability under three-dimensional stress is established, and a computing program is worked out.
基于压裂泵阀箱的失效分析，建立了在三向应力作用下计算阀箱可靠性的模型，设计了计算程序。
The stress distribution law of adherence of young on old concrete under splitting-tension load is studied as viewed from stress analysis.
从应力分析角度研究在劈拉荷载作用下，新老混凝土粘结的应力分布规律。
应用推荐