The arc-spraying aluminum coating on iron substrate was treated by induction remelting.
利用高频感应重熔工艺对铁基电弧喷涂铝层进行处理。
As one of the key parts of a super-sonic arc-spraying gun, the Laval nozzle design is still a pivot for researchers.
作为超音速电弧喷枪的关键部件之一，拉瓦尔喷嘴设计一直是人们研究的一个重点。
The results show that the skin and the cored powders melted and fused to form homogeneous solid solutions during the arc-spraying procedure using the cored wires.
结果表明：喷涂过程中粉芯丝材的表皮材料和芯粉材料能相互熔解和融合形成较均匀的固溶体；
There are some methods that are plasma spraying, arc-spraying and hypersonic flame spraying technology to prepare alloy coating with high erosion and corrosion resistance.
目前制备高性能涂层常用的方法有等离子喷涂、电弧喷涂、超音速火焰喷涂等。
Investigating Arc-spraying Rapid Tooling by the Numbers, we find that performance of spraying metal shell and the backup material influences the employ life of Arc spraying die.
本文对电弧喷涂快速制模技术进行了系统的研究，发现喷涂金属壳和背衬材料的性能优劣直接影响到整个模具的使用寿命。
Arc spraying rapid tooling manufacturing technique based on RP is a new technology of mould making.
基于RP原型的电弧喷涂快速模具制造工艺是一项模具制造新技术。
Atomization is very important in arc spraying, as the coating quality depends greatly on atomization.
雾化在电弧喷涂中具有重要的作用，涂层质量很大程度上取决于雾化效果。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
The supersonic velocity electric arc spraying technology (HVAS) has gained satisfactory solution.
电弧超音速喷涂技术(HVAS)可以有效的解决此问题。
In the present study, the microstructure and properties of iron aluminide intermetallic coatings in situ synthesized by cored wire and high velocity arc spraying (HVAS) were investigated.
采用粉芯丝材和高速电弧喷涂技术(HVAS)原位合成了铁铝金属间化合物涂层，并研究了涂层的显微组织和性能。
The microhardness of JCW-S-AM coatings prepared by high velocity electric arc spraying on conditions of different process parameters was tested by hardometer.
采用超音速电弧喷涂设备在不同工艺参数条件下制备JCW - S - AM涂层，利用显微硬度计测定各种涂层的显微硬度。
In this paper, basic principles and technical process of arc spraying are introduced. The main application and current development are also discussed.
介绍了电弧喷涂技术的原理和工艺过程，论述了该技术的主要应用和研究进展。
Aluminum coating on AZ91 magnesium alloy was deposited by arc spraying.
采用电弧喷涂技术在镁合金az91基材表面制备铝涂层。
High velocity arc spraying is one of the high tech processes in thermal spray devices where the high velocity arc spraying gun is the key equipment.
高速电弧喷涂技术是热喷涂技术中的高新技术，高速电弧喷涂枪是实现高速电弧喷涂的关键装置。
It is also proved to be the ideal power source for arc spraying process according to the experimental analysis of the dynamic behavior in arc.
对逆变方波交流电弧喷涂过程中电弧区的动态行为进行了一定试验分析，得出逆变方波交流电源是理想的电弧喷涂电源。
As a new method to improve the quality of arc spraying, arc ultrasonic is introduced into the field of spraying.
提出用电弧超声方法作为改善喷涂涂层质量的新方法。
The arc spraying technology was compared with the other thermal spraying technologies in the ways of coating performance and so on.
将电弧喷涂与其他热喷涂技术在涂层性能等方面做了对比。
Arc spraying of other parameters by the spraying equipment and spraying decide the properties of materials.
电弧喷涂的其他规范参数由喷涂设备和喷涂材料的特性决定。
Surface roughening is very important in arc spraying, as the coating quality depends greatly on its treatment result.
表面粗化在电弧喷涂中具有重要作用，涂层质量很大程度上取决于表面粗化预处理的效果。
This set of equipment by the arc gun, arc spraying of power supply. Take another corollary equipment: air compressor, air cleaner, put silk plate frame.
本套设备由高速电弧喷枪、电弧喷涂电源组成。另需配套设备：空气压缩机、空气滤清器、放丝盘架。
The results showed that the main parameters influencing the coating properties are the arc current, spraying distance and air pressure.
结果表明，影响涂层性能的工艺参数主要是电弧电流，其次是喷涂距离和雾化空气压力。
Theories and specialties are given about arc spraying technology.
介绍了电弧喷涂技术的原理和技术特点。
The major results are summarized as follows: the amorphous coatings were prepared by arc spraying technology, the highest amorphous content attainable 65.
主要研究结果如下：采用电弧喷涂方法制备非晶涂层，涂层中非晶含量最高可达65。
The result suggests that the coating of Al-based cored wire prepared by arc spraying has excellent high-temperature oxidation resistance and corrosion resistance.
研究结果表明：电弧喷涂铝基粉芯丝材制备的涂层具有优良的抗高温氧化和耐腐蚀性能。
Summarizes the first industrial experiment on protecting from water erosion by spraying blade, concludes that electric-arc spraying should be perfected and popularized in this respect.
通过对叶片防水蚀喷涂保护的首次工业性试验进行了总结，并认为喷涂在这方面应该得到完善和推广。
A new technology-the electric arc spraying technology combined by powder is introduced.
介绍一种新型电弧喷涂技术粉末复合电弧喷涂技术。
The arc spraying is a kind of important heat spraying technologies. It can be used to repair the damaged surface of hydraulic cylinder piston, and obtains the better effect.
电弧喷涂是热喷涂的主要技术之一，用于液压缸活塞柱体表面修复，可以得到较好的修复效果。
The bed test of diesel engine indicated that the optimized dry blasting steel grit and arc spraying technology was feasible to repairing crankshaft.
发动机台架试验结果表明，优化干喷钢砂电喷涂工艺规范用于修复曲轴是可行的。
The high-power two-time atomization electric arc spraying equipment and techniques are presented.
介绍大功率二次雾化电弧喷涂设备和技术。
The high-power two-time atomization electric arc spraying equipment and techniques are presented.
介绍大功率二次雾化电弧喷涂设备和技术。
应用推荐