Electrode for arc welding consists of the core and the coat.
电弧焊的焊条是由焊芯和药皮两个部分组成的。
The manual arc welding normally refers to the manual welding using coated electrode.
手工电弧焊通常是指采用药皮焊条的手工焊接法。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
This scheme not only eliminates the interference between main arc and pilot arc, but also reduces the deterioration of the tungsten electrode and improves the stability of welding process.
该方案不仅克服了传统方案存在的主维弧干涉现象，而且可大大降低钨电极的烧损，提高焊接过程的稳定性。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
在没有铸铁焊条的情况下，采用普通低碳钢焊条制作铸铁焊条，用电弧冷焊技巧修复损坏的铸铁件。
The stability of the welding arc depends mainly on the voltage and the gas ionization when current zero-crossing as well as the electron emission ability of the electrode.
其电弧稳定与否，主要取决于电流过零瞬间的电弧空间电离度、 电极发射电子能力及再引燃电压的上升速度。
" bridge brand " marble mostly to use in slagging powder with drug cover welding electrode. improve slag basicity, steady arc, increase surface strain. it also used on architecture industry.
粤桥牌大理石粉为白色或浅灰色矿粉，主要用于药皮焊条等焊接材料的造渣造气剂，可提高熔渣堿度稳。
The illinium electrode produces a slim arc when used in welding. With a high level of compression, it has a bigger melting depth in medium and high currents.
钇钨电极在焊接时弧束细长，压缩程度大，在中、大电流时其熔深比较大。
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。
Two cores melting speed can keep consistence is very important for twin electrode single arc welding to be stabilized.
两焊芯熔化速度能否保持一致是双电极焊条单弧焊过程能否稳定进行的关键。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
With measuring dynamic temperature change of twin electrode, the heating and melting of twin electrode single arc welding was investigated.
通过测量双电极焊条的动态温升等试验方法研究了双电极焊条单弧焊中双电极焊条的加热和熔化。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
In this paper, the technology of double electrode single arc welding is introduced and the double surfacing electrode is studied.
介绍了双电极焊条单弧焊工艺，研究了双电极石墨型堆焊焊条。
This paper introduces the twin electrode single arc welding technology.
介绍了双电极焊条单弧焊工艺。
In this thesis, a set of control system is developed for IGBT inverter power supply of consumable-electrode CO2 shielded arc-welding machine.
本文为熔化极CO2保护的IGBT逆变半自动弧焊机电源研制了一套控制系统。
Fine arc force adjustment, can prevent electrode sticking. Applicable for welding of each steel structure.
良好推力调节，具有焊条防黏功能，适用于各种刚结构焊接。
The paper introduces the high toughnesses Ultra-low hydrogen electrode (new J807CF) which matches WCF—80 steel for manual arc welding.
本文介绍了高强高韧性超低氢新J807CF焊条，其各项性能均达到国外同类产品的先进水平，是WCF—80钢的专用配套焊条。
At the same time, production and processing all kinds of resistance welding electrode, submerged arc welding, conductive nozzle.
同时生产加工各种电阻焊电极、埋弧焊、导电咀。
A method as claimed in claim 1, wherein said step of building up said barrier is carried out by using an arc having a submerged consumable welding electrode.
法所称的索赔1 ，其中说一步说屏障建设进行使用电弧有淹没消耗焊条。
Preferably the barrier is built up using an arc having a consumable electrode and it is further preferred that the part of the region against the barrier is built-up by submerged arc welding.
最好的屏障是建立了一个弧形使用了耗电，并进一步希望，该区域的一部分是对隔离墙建成的埋弧焊。
Preferably the barrier is built up using an arc having a consumable electrode and it is further preferred that the part of the region against the barrier is built-up by submerged arc welding.
最好的屏障是建立了一个弧形使用了耗电，并进一步希望，该区域的一部分是对隔离墙建成的埋弧焊。
应用推荐