Table 3.9. Characteristic temperatures determined from the bending modulus curves.
表3.9从弯曲模量曲线测定的特征温度。
The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.
测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；
Fabric Stiffness Tester. To determine the bending height, flexural rigidity and bending modulus of fabric by simple procedures and calculation.
织物硬挺度测试仪，可通过简单操作及计算测出织物的弯曲高度、弯曲刚度、弯曲模量。
Fabric by tester dull color. gives degrees operation and simple calculation out the fabric of bending height, bending rigidity, bending modulus. Standard: ERT 50-2 ASTM D1388 bs3356.
织物硬挺度测试仪，可通过简单操作及计算求出织物的弯曲高度、弯曲刚度、弯曲模量。标准：ERT 50 - 2ASTM D1388 BS 3356。
The tensile strength and the bending modulus of RHDPE/EVA/MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.
废胶粉经自制表面改性剂ACDI预处理后，其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%，而对共混物的其它性能影响不大。
Bending Strength and Weibull modulus of eight kinds of ceramics samples were studied.
研究了八种不同陶瓷试样的抗弯强度和韦布尔模数。
Results show that the shape and relative thickness of section, section modulus in bending are the main factors that determine the bending properties of the profiles.
结果表明，型材的截面形状、相对厚度及抗弯截面系数等是决定弯曲性能的主要因素。
The theory and method of bending test on nanobeam for the measurement of Young's modulus based on atomic force microscope (AFM) are introduced.
阐述了基于原子力显微镜(afm)的弯曲测试测量纳米梁杨氏模量的理论和方法。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
There was little change in the bending strength, Young's modulus and dynamic ductility of the test wood treated by microwave irradiation and steaming appropriately.
适当的微波处理和汽蒸处理使试材的抗弯强度、抗弯弹性模量和冲击韧性并不明显降低。
Result When the whole thickness of the samples were determined, the fracture load, bending strength and elastic modulus were increasing according the increase of the metal thickness.
在总厚度不变时，破坏载荷，弯曲强度及弹性模量都随金属厚度增加而增加。
The stress state of the branch was reflected by its bending degree. Bending degree could be controlled by changing the value of Young's modulus.
枝条的弯曲程度体现了它的受力情况，同时也可以用杨氏弹性模量来控制其弯曲度；
In addition, there is positive correlation between fractal dimension and bending strength, bending elastic modulus.
另外，发现分形维数与抗弯弹性模量、抗弯强度之间存在正相关趋势。
The design of punching, bending, cutting off consecutive modulus design.
本设计进行了冲孔、压弯、切断连续模的设计。
The bending stiffness of elastoplastic member is product of tangent elastic modulus of material and inertia moment of the section.
抗弯刚度的概念是材料切线模量和截面对中和轴的惯性矩的乘积。
It shows that after adding 20% low profile additive to the UP resin, the shrinkage rate of cured resin is 2.1%, the retention rate of bending strength is 88% and no change in flexural modulus.
结果表明，在不饱和聚酯树脂中加入2 0 %的该类低收缩添加剂，树脂的固化收缩率为2 1% ，弯曲强度保有率为88% ，弯由模量没有明显变化；
With respect of bamboo, bending strength and modulus of rupture increased gradually from inboard bamboo inner place to outboard bamboo skin in the radial direction.
毛竹沿径向的弯曲强度和弯曲模量从最内层竹黄处向最外层竹青处逐渐增大。
The Young's modulus of silicon nano-beam on <100> direction was measured by bending test method using an atomic force microscope(AFM).
阐述了基于原子力显微镜（AFM）的弯曲测试测量纳米梁杨氏模量的理论和方法。
So far, we have found that the static elastic modulus of wood can only be measured through the experiments of tension, compression and bending.
到目前为止，仅通过拉伸、压缩或弯曲试验测得了木材的静弹性模量。
Methods: the carbon -fiber cloth were embedded in diverse positions of the PMMA denture -base. The bending strength and the modulus of elasticity were determined and compared among them.
方法：将碳纤维预浸织布埋入PM MA不同部位的基托内，测定并比较不同形式的碳纤维织布增强PMMA基托的弯曲强度和弹性模量。
Experimental and theoretical researches were undertaken on the elastic modulus in tension and bending of 3d braided composites containing axial yarns.
对包含有轴纱的三维编织复合材料的拉伸弹性模量和弯曲弹性模量进行了试验研究和理论分析。
The results showed the addition of a little amount of PEG improved the tensile strength, bending strength and modulus of the blend greatly, with a small increase of the impact strength of the blend;
结果表明，少量PEG的加入使复合材料的拉伸、弯曲强度和模量都得到了显著改善， 冲击强度略有增加；
The results showed the addition of a little amount of PEG improved the tensile strength, bending strength and modulus of the blend greatly, with a small increase of the impact strength of the blend;
结果表明，少量PEG的加入使复合材料的拉伸、弯曲强度和模量都得到了显著改善， 冲击强度略有增加；
应用推荐