Moreover, in this paper we analyse the initial failure of bolt connection in gear couplings.
文中对齿轮联轴器的连接螺栓的早期失效进行了分析。
The force and deformation of bolt connection with elastic cell fixed under a nut are analyzed.
现有文献称“在螺母下面安装弹性元件，起到了柔性螺栓的效果”。
A plastic pallet comprises a plastic upper and lower pallet body component with bolt connection.
塑胶托盘，由塑胶上、下托盘体组件通过螺栓连接构成。
Reliable references are provided for simplified computation of bolt connection from complex structure.
为复杂结构中螺栓连接的简化计算提供了可靠参考依据。
The steel-structure bridge deck is three-span, and each one is welded separately with bolt connection.
三跨的人行桥的桥面为钢结构，总共三段，每段分开焊接制作，通过螺栓连接。
In this paper presents optimum design of flange bolt connection with constraint of strength reliability.
本文以强度可靠度为约束，对法兰螺栓联接进行了优化设计。
The contact finite element method is used in present paper to analyze stress of bolt connection structure.
应用接触有限元方法，对螺栓联接结构进行了应力分析。
Poor sub-sea welding is avoided by using bolt connection; it can be directly used for sub-sea pipeline welding.
由于采用螺栓联接，避免了焊接质量差的水下焊接，可直接用于海底管道维修。
Sun Valley of Expo Axis applies free-form design idea, which is reticulated shell structure with bolt connection joint.
上海世博会世博轴阳光谷采用自由形态设计理念，是一种采用栓接节点的网壳结构。
The invention avoids the defects of bolt connection, and has the advantages of hidden connection and reasonable structure.
本发明避免了螺栓连接带来的缺陷，具有连接隐蔽、结构合理的优点。
Frame: Frame including upright by the automatic-punching, rolling Bracing. That be connected through the pine-bolt connection.
柱片：柱片由经过全自动冲孔、冷弯轧制的立柱及横斜撑通过防松螺栓联结。
In order to ensure the reliability of flywheel bolt connection, stress analysis of bolt is performed using contact analysis method.
为了确保飞轮螺栓连接的可靠性，采用接触分析法对螺栓进行了应力分析。
Simply and easy method named check table method in design of tightened bolt connection with uncontrolled tightened force is presented.
针对不控制预紧力的紧螺栓联接设计计算时需采用试算法的问题，提出一种无需试算的新方法即查表法。
By the practical engineering, authors show the quality influence factors and control measures of high-strength bolt connection in steel structure.
通过工程实例，介绍了钢结构中高强度螺栓连接的质量影响因素及控制措施。
The additional bending moment results in the pulling state of rear back rod of the mast and the conventional bolt connection seems to be very weak.
附加弯矩导致桅杆的后背主弦杆受拉，传统的螺栓连接方法显得薄弱。
A whole building adopts bolt connection or splicing modes so that the building body is smooth and beautiful and is convenient to mount and dismount.
整栋房均采用螺栓连接或插接方式，房体平整美观，安装拆装方便。
Compared with the traditional methods, such as embedded fixation, hole casting, bolt connection and welding, Haihang nail fastening technology has many advantages.
海行射钉紧固技术与传统的预埋固定，打洞浇注，螺栓连接及焊接等方法相比，具有许多优越性。
By using the concept of equivalent reliability, the reliability design of bolt connection can be simpler and more feasible with scientifically reasonable calculation.
采用“当量可靠度”概念进行螺栓联接的可靠性设计简便可行，使得螺栓联接的可靠性计算更加科学合理。
This paper discusses the application of calculation formulas of high strength bolt connection in bearing type under the action of both shearing force and axial tensile force.
本文讨论了承压型高强度螺栓连接在同时承受剪力和杆轴方向拉力时其计算公式的应用。
The paper provides some valuable references and is useful for engineers and technicians on the basis of analysis of problems needing attention in the design of bolt connection.
对螺栓联接设计中应注意的主要问题进行分析，提供了一些有价值的资料，对工程技术人员合理设计螺栓有一定参考作用。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
Stress relaxation should be taken into consideration while designing tight bolt connection under a high temperature. The paper discusses the calculation thought and solution about stress relaxation.
在高温环境下有紧密性要求的螺栓联接，在设计时应考虑应力松弛。讨论了关于应力松驰问题的计算思路和解决方法。
This paper analyses the special points and mechanism of bolt connection mode on type HXD1 locomotive traction base, and shows the effect of bush to bolt application reliability by stress calculation.
分析HXD1型机车牵引座的螺栓连接方式中的特殊点及其机理，并通过受力计算说明了衬套对螺栓使用可靠性的影响。
Fix the connection plate of foundation bolt with nut.
将地脚螺栓连接板用螺母紧固。
To make the connection surface tight, we must increase the bolt preload.
若要使连接面贴紧，就必须加大连续螺栓的预紧力。
Expression of angle section based on the result of ANSYS finite element analyse is presented at last, which provide the basis for the design of bolt- Angle beam-to-column Connection.
最后依据有限元结果分析，提出角钢截面的计算公式，为螺栓—角钢梁柱连接节点设计提供了依据。
Homeproductseven roof flat roof fully use internal wall panel and ones own intensity of the roof boarding, through draw nail, bolt, connection nailed to make.
是通过充分利用夹芯墙板及屋面板的自身强度，经过拉钉螺栓自攻钉的连接而组成的定型活动房屋系统。
Homeproductseven roof flat roof fully use internal wall panel and ones own intensity of the roof boarding, through draw nail, bolt, connection nailed to make.
是通过充分利用夹芯墙板及屋面板的自身强度，经过拉钉螺栓自攻钉的连接而组成的定型活动房屋系统。
应用推荐