The first step is to model the close loop control system of wire bonding force.
两步走的策略被采用：第一步，建立键合力控制系统的闭环模型；
The characteristics of bonding force in the ultrasonic bonding process were also studied.
在超声引线键合过程中，键合压力是影响键合强度的重要因素之一。
It has higher corrosion resistance, heat resistance and firmly bonding force with substrate.
具有优良的耐蚀性、耐热性，与基体钢材结合牢固。
All these are bonding force the relationship among family, country and society and constantly adjust them.
所有这些，对家庭、对国家和社会都起到了巨大的维系和调节作用。
Features: High temperature resistant net belt is adopted for pressing to enhance the bonding force of the product.
特点：采用耐高温网带压著、提高产品的粘合力。
Bonding force of substrate and adhesive layer is large. No adhesive failure occurs during storage and construction.
基材与胶层结合力大，在存放或施工过程中不存在脱胶现象。
The coating is in silver gray and half-bright, and the nickel coating has no pinhole, no pit and good bonding force.
镀层呈银灰色半光亮镀层，镍层无针孔、无麻点、结合力好。
Features: (1) High temperature resistant net belt is adopted for pressing to enhance the bonding force of the product.
特点：(1)采用耐高温网带压著、提高产品的粘合力。
Good properties of strong bonding force, water resistance, heat and wet resistance, frozen and thaw. It can be constructed on the wet surface, no poison and no smell.
粘接力强，耐水、耐湿热、耐冻融性能优良，可在潮湿基层施工，无毒无味。
The strength of the coated diamond, the bonding force with the metallic matrix, heat resistance (sintering temperature of diamond bits) and conductance are all improved.
覆层后的金刚石强度、与金属胎体的结合力和抗温(烧结钻头时的温度)性能，以及导电性等有明显的提高。
The experimental results showed that the interface moisture condition is an important factor to influence the bonding force of the interface between new and old concrete.
结果表明，界面干湿状态会影响界面结合强度，干燥状态对新旧混凝土结合最为有利。
The invention can effectively use metal silver, reduces the cost, improves the bonding force between plastics and the lead frame, and achieves the purpose of anti-layering.
本发明可以有效利用金属银，降低成本，提高塑料与引线框架的结合力，达到防分层目的。
Using high performance NdFeB permanent magnet, the alternator is high efficient and compact. The unique electro-magnet design makes the bonding force and cut-in speed very low.
用高性能钕铁硼永磁，发电机是高效率和紧凑。独特的电磁铁设计使粘接力和削减的速度非常低。
Choose the proper granularity and make the the working together of mechanic and chemical bonding force produce the greatest effect, then better bonding strength can be obtained.
选择合理的砂带粒度，使木材表面的机械结合力与化学结合力的共同作用达到最大，才可以获得较优的胶合强度。
The probe of the invention has the advantages of high sensitivity, high and stable probe bonding force, long service life and favorable orientation of probe on the substrate electrode.
本发明探头具有灵敏度高，探针结合力大、稳定，使用寿命长，探针在基质电极上取向性好的优点。
The essential of accessorial evidential administrative problem is the problem of relationship between the bonding force of concrete administrative behavior and the evidence effectiveness.
附属证据性行政问题的实质是具体行政行为公定力与证据效力的关系问题。
After adding can obviously improve the initial bonding strength, peeling strength and cohesive force, and achieves the best balance point.
添加后可明显提高初粘力、剥离强度和持粘力，并使之达到最佳平衡点。
The distributed force model of intelligent beam structures is presented in considering the effect of bonding layer on basis of hypothesis of linear strain in the paper.
基于线性应变假设，提出了考虑粘贴层影响的智能结构梁分布力模型。
The results show that there is not any evidence of silver migration within LTCC construction, and conductor adhesive force, wire-bonding strength and insulation resistance are high.
结果表明：基板内部的银导体不存在迁移现象，导体的附着力、键合强度以及基板的绝缘电阻等性能均比较理想。
The amplitude ratios of different reflected and transmitted waves were obtained for an imperfect boundary, and deduced for normal force stiffness, transverse force stiffness and perfect bonding.
得到不完全边界上不同反射波和透射波的振幅比，并导出法向力刚度、切向力刚度和完全粘接时的振幅比。
The distributed force model of intelligent beam structures is presented considering the effect of bonding layer on the basis of theory of linear strain.
以线性应变理论为基础，提出了考虑粘贴层影响的智能结构梁分布力模型。
So bonding performance of the interface and internal force translating mechanism between FRP and high strength concrete are crucial in FRP strengthening technology.
FRP与混凝土之间通过界面层传递内力，研究界面层的粘结性能和内力传递机理是FRP加固技术的关键。
The type of interfacial binding force was discussed in this paper, and formation process of bonding strength during wood gluing operation was also discussed.
简要概述了界面结合力的类型以及木材胶接操作过程中胶合强度的形成过程。
The paper mainly introduces raw material quality control, calculation of burden, stretch-draw force and elongation value, construction technology of non-bonding prestressed steel strand.
主要介绍无粘结预应力钢绞线的原材质量控制、配料、张拉力值、伸长值的计算及施工工艺。
The automatic assembly system consists of a micro force sensor integrated micromanipulator, a bonding centre with three working cells, and a microscopic vision module.
在此基础上确定了自动组装系统的组成结构，并详细介绍了研制的具有力感知功能的微操作手、三工位键合炉以及显微视觉等关键技术模块。
The adhesive layer may include a bonding agent, such as a polymer gel, having a residual extraction force of between about 50 grams and about 200 grams.
该粘合层可包括例如聚合物凝胶的结合剂，该结合剂具有在大约50克和大约200克之间的残留物拨出力。
The adhesive layer may include a bonding agent, such as a polymer gel, having a residual extraction force of between about 50 grams and about 200 grams.
该粘合层可包括例如聚合物凝胶的结合剂，该结合剂具有在大约50克和大约200克之间的残留物拨出力。
应用推荐