The calculation results show that the boundary element method possesses some advantages, such as less work, higher accuracy and wider use.
实例计算的结果表明，边界单元法具有工作量少、精度高、适应性强的优点。
The results have shown that it was convenient, speedy and of high accuracy for adopting boundary element method to deal with similar problems.
结果表明，用边界元法处理同类问题，具有方便、快速、精度高等优点。
The results show that the higher-order, fast multipole boundary element method can be applied to large problems with high numerical accuracy for engineering designs.
研究结果表明，高阶快速多极边界元法易于分析此类大规模问题，并具有很高的数值计算精度，满足工程设计的要求。
The direct boundary element method used in sound field analysis is studied.
研究了用于声场分析的直接边界元法。
The boundary element method can be used for the sound radiation calculation.
两者结合可以进一步计算远场辐射声压。
The boundary integral equation is discretized by the boundary element method.
运用边界单元法将边界积分离散化。
Theory of solving the response function by boundary element method is discussed.
旨在探讨用边界元法求解响应函数的理论方法。
Considering the peculiarity of this problem, it can be solved by boundary element method.
考虑到问题的特殊性，利用边界元法进行求解。
Aim To study the boundary element method of the dynamical response of viscoelastic thin plates.
目的研究粘弹性薄板动力响应的边界元方法。
The paper describes a boundary element method to solve problems in transient temperature fields.
本文讨论用边界单元法解瞬变温度场问题。
This paper deals with the application of the boundary element method for sound radiation problems.
讨论了边界元方法在声辐射问题中的应用。
The primal research work about virtual boundary element method is on the problems of single domain.
等额配点法和最小二乘积分法是两种最常用的虚边界元法构造思路。
In this paper, a new efficient and accurate all particular solution boundary element method is developed.
提出一种新的高效、高精度的全特解场边界元方法。
This is an extended application of the boundary element method in electromagnetic field eigenvalue problem.
这是边界元算法在波导本征值问题中的深入应用。
In this paper, we establish the theory for boundary element method and its application in potential problems.
本文研究了边界单元法的理论及其在解位势问题中的应用。
In this paper, we analyse the shallow spherical shells with variable thickness by the boundary element method.
本文利用边界元方法分析了变厚度扁球壳的非线性问题。
The scaled boundary element method is used to calculate the deflection of pavement structure under dynamic loads.
将比例边界元方法引入路面结构的动态响应求解，并与有限元方法进行对比分析。
In this paper a new simple boundary element method for solving polygonal thick plate bending problems is proposed.
本文对多边形厚板弯曲问题，提出了一种新的简单的边界元解法。
In this paper the boundary element method based on stress for solving the elastic problems of the plane is proposed.
本文提出了求解平面弹性问题的应力边界元法。
The fast multipole method (FMM) was used with the boundary element method (BEM) to predict fractures in large castings.
将快速多极算法(FMM)应用到边界元法(BEM)中，对断裂力学问题进行大规模计算。
The cutoff wavelength of the rectangular coaxial waveguide in the coupling region is calculated by boundary element method.
其耦合区为矩形同轴波导。 文中用边界元素法对矩形同轴波导的截止波长进行了计算。
A numerical calculation of enhanced heat transfer efficiency of LFT is finished in this paper by the boundary element method.
本文运用边界单元法对低肋管的强化传热效能进行了数值计算。
The three-dimensional potential flow inside the impeller of a screw centrifugal pump was analysed by the boundary element method.
采用边界元法对螺旋离心泵叶轮中的三维势流进行了数值计算。
A boundary element method for the analysis of interfacial slip in fiber-reinforced composites under transverse loading is presented.
用边界元方法对横向载荷作用下纤维增强复合材料界面的滑移进行分析。
Only the subsoil-foundation boundary is discretized, the same as boundary element method, which reduces the spatial dimension by one.
这些方法，仅对地基-基础界面进行有限元离散，使问题的空间维数减少一维；
Based on the boundary element method, an inverse method is developed to identify the material parameters of orthotropic plane problem.
以边界元计算为基础，提出正交各向异性平面问题材料参数识别的反分析方法。
The spline fictitious boundary element method (SFBEM) is a modified method to the conventional indirect singular boundary element method.
样条虚边界元法是针对传统间接奇异边界元法存在的问题而提出的一种半解析半数值方法。
This paper describes the dynamic boundary element method and its application to the analysis of dynamic effects of soil-structure interaction.
本文研究了动力边界单元法及其在土一结构动力耦合效应分析中的应用。
The traditional boundary element method of outside domain singularity points for plate bending problems needs two boundary integral equations.
传统的平板弯曲边界元域外奇点法要求建立二个边界积分方程才能求解。
The emphasis is placed upon the numerical methods, including finite difference method, finite element method, boundary element method and so on.
着重讨论了包括有限差分法、有限元法和边界元法等在内的数值方法。
应用推荐