The nano Na-montmorillonite was filled into PP by melting method.
采用熔融法把纳米钠基蒙脱土填充到聚丙烯中。
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。
UV-curable unsaturated polyester-urea resins which could be used as UV-curing coating were prepared by melting method and its structure was determined by FT-IR.
采用本体熔融聚合法制备了可紫外光固化的不饱和聚酯酰胺脲树脂，该类树脂可用作紫外光固化涂料，并对树脂进行了红外表征。
METHODS Preparing the solid dispersion by melting method at different drug-to-PEG ratios with different PEG moleculars and studying the preparation with dissolution rate in vitro and DSC method.
方法以不同分子量不同比例的聚乙二醇为载体，以熔融法制备固体分散体，并进行体外溶出度研究和DSC扫描。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
By optimizing composition, foundry method, melting process and heat treatment process, the rate of qualified castings was increased up to 85%.
通过对成分、铸造工艺、熔炼工艺及热处理工艺的优化，使铸件的工艺出品率达到85%。
Solgel process was specially suitable for preparing the functional ceramic fibers which was very difficult or even could not be obtained by the conventional melting method.
溶胶凝胶工艺尤其适合制作传统的熔融法不能或不易获得的功能陶瓷纤维。
Alloy coating is prepared by induction melting and casting with the method of direct feeding powder on the surface of a shaft.
介绍了用直接送粉方式在轴类零件表面感应熔铸合金层的工艺原理和实验装置。
This paper makes a systematic study of anharmonic properties and melting law for solids at high temperatures-high pressures by using phenomenological method.
本文运用唯象的方法对高温高压的宏观条件下固体的非谐性质以及熔化规律作出了较为系统的研究。
By analysing the domestic and international situation of method for measuring mould powder melting velocity, crucible method was brought forward.
通过分析结晶器保护渣熔化速度测定方法的国内外现状，提出用坩埚法测定的方法。
The raw materials are added into a crucible for melting, then the obtained glass liquid is added into a platinum crucible for melting, clarifying and homogenizing by an optical glass fusion method.
该光放大用玻璃的制备方法是把原料加入坩埚中，进行熔化，得到玻璃液，加入铂坩埚中，再用光学玻璃熔制法使其熔融、澄清、均化。
Niobium acid was synthesized by potassium hydroxide melting method using different inorganic acid treatment and its properties were characterized by FF-IR, TG and UV-VIS spectra.
采用氢氧化钾熔融法以不同无机酸处理合成了铌酸。
Fenofibrate solid dispersion tablets were prepared by solvent melting method using PEG4000 and sodium lauryl sulfate.
PEG4000十烷硫酸钠体，溶剂-熔融制备非诺贝特固体散体，再适辅混合压片制非诺贝特固体散片。
This paper deals with the preparation of polyester-amide hot melting adhesive for textile by the method of co-condensed polymerized synthesis.
本文叙述了通过共缩聚反应制备织物用聚酯酰胺热熔胶的方法。
The structure and working principle of the devices for melting point measurement by means of thin film comparative method of cryoscopy were introduced.
介绍凝固点下降薄层比较法测量熔点标准物质熔点的测量装置的构成与工作原理。
The uniformity of thin melt-blown webs which is produced of low melting point copolyamide by melt blowing line with accessory device was tested by weight method.
采用称重法对在添加了辅助装置的熔喷设备上制得的以低熔点共聚酰胺为原料的热熔纤网的均匀性进行了测试。
The finite element method is used to analyze the influence of external circumstances on effect of deicing or snow melting system by electrically conductive concrete.
用有限元程序分析了外部环境对导电混凝土用于融雪化冰时效果的影响。
The invention discloses the method of combined production of hydraulicity gelation by melting magnesium under thermal reduction process.
本发明公开的是热还原法炼镁联产水硬性胶凝材料的方法。
Samples of blended coal ash were taken from the boiler of a power plant 700mw unit. Their softening temperature was measured by a pyramid method on an intelligent ash-melting point measuring device.
从某电厂700MW机组锅炉取混煤灰样，在智能灰熔点测定仪上采用角锥法对其进行软化温度测定。
In the formula of the method, all components are dispersed to be mixed and are subject to melting by a double screw extruder, mixing, extrusion, cooling, drying, granulating and packaging.
该方法是将配方中各组分分散混合后，通过双螺杆机熔融、混炼、挤出、冷却、干燥、切粒和包装。
The phosphate glass-ceramic of different components is prepared by the melting method and crystallization technique, TiO2 is nucleator.
本文采用熔融和晶化技术制备出不同组份的磷酸盐玻璃陶瓷，成核剂为TiO2。
The key to realize ice-melting of long HV transmission lines by short-circuit method is to obtain a huge ice-melting power supply.
高压长线路实现短路法融冰的关键是获得大容量的融冰电源。
Also sum up the manufacturing methods of magnesium based hydrogen storage materials, containing melting method, diffusing method, mechanical alloy method, composing by hydrogen burning metho...
总结了目前制备镁基储氢材料所用的主要方法，例如熔炼法、扩散法、机械合金化法、氢化燃烧合成法等。
In this paper a series of RE2MgNi9 hydrogen storage alloys were synthesized by vacuum induction melting method.
用真空熔炼法制备了多种贮氢合金原样，分别经不同温度、时间热处理和保护气氛下球磨处理。
The comparative tests show that the content of silicon dioxide in carbon materials determined by the melting method (MM) is more stable and accurate than the hydrofluoric acid method (MHA);
通过对比试验发现：测定炭素材料中二氧化硅的含量，熔融法的分析结果比氢氟酸法更稳定、准确；
The invention also relates to a method for measuring the heat conduction coefficient, the eutectic point and the congruent melting point by the device.
本发明还涉及利用该装置测量导热系数、共晶点和共熔点的方法。
Improved the method of purification, the structure of lactide was characterized by the melting point, IR, UV, Digital Automatic Polarimeter and HPLC.
改进了提纯L -丙交酯的方法，采用熔点、红外光谱、紫外光谱、数字自动旋光仪及高效液相色谱对提纯后的L -丙交酯进行了表征。
Method: carvedilol solid dispersions were prepared by solvent-melting and coevaporation methods with PEG-6000 and PVP as carriers, the study on the dissolution was conducted in vitro.
方法：以聚乙烯吡咯烷酮（PVP）、聚乙二醇-6000（PEG-6000）为载体，溶剂法和溶剂熔融法制备固体分散体，并进行体外溶出度研究。
Method: carvedilol solid dispersions were prepared by solvent-melting and coevaporation methods with PEG-6000 and PVP as carriers, the study on the dissolution was conducted in vitro.
方法：以聚乙烯吡咯烷酮（PVP）、聚乙二醇-6000（PEG-6000）为载体，溶剂法和溶剂熔融法制备固体分散体，并进行体外溶出度研究。
应用推荐