This paper analyzes the positive and negative influence of CAD in the design, and states the system, it will make the designer keep the objective attitude in the application.
本文分析了CAD在设计中引起的正面和负面影响，并进行了系统的阐述，从而使设计者在应用中能够保持客观的态度。
Equipped with advanced computer - aided design (CAD) systems and computer management system.
配有先进的计算机辅助设计¡(CAD)系统和电脑管理系统。
The research on CAD system supporting the Design for assembly and Disassembly was carried out.
对支持面向装配和拆卸设计的CAD系统进行了研究。
CAD system has been a necessary tool and become more and more important in correlativity design departments.
CAD系统作为相关设计部门的必备工具，发挥着越来越重要的作用。
The model of CAD system is constructed after analyzing the actuality and process of heat-exchange equipments' design in refrigeration industry.
本文通过分析目前制冷行业换热设备设计的现状和流程，构建了换热设备CAD系统的系统模型。
NC processing program of earn is obtained through redesign by the CAD / CAM system. Fast design and machining of the earn are realized.
经过CAD／CAM系统的重新设计，可获得凸轮的NC加工程序，实现凸轮的快速设计与加工。
According to the characteristics of dish-spring combined design, using computer aided design, database and computer graphics technology, this paper gives a CAD system of dish-spring combined design.
根据碟形弹簧组合设计的特点，应用计算机辅助设计、数据库及计算机绘图技术，形成了一个叠形弹簧组合设计的计算机辅助设计系统。
The system takes intelligent CAD as the key technology, fulfils the vessel's structure design and process plan, and generates NC processing code.
系统以智能技术为核心，完成容器结构设计与工艺规划，最后输出NC加工代码。
A study is performed on the method for design of a miter gate CAD system and some correlative functions of the system.
对船闸人字门CAD系统的设计方法进行了研究，探讨了相关的设计问题。
The method of fabric appearance simulation is one of important researches during the fabric CAD (Computer Aided Design) system development.
织物外观模拟方法是织物CAD系统开发的一个重要研究内容。
When they are programmed, most of needed characteristic data could be attained from the CAD design system.
它们编程所需要的大多数特征数据均可从CAD设计系统中得到。
In this dissertation, networked information releasing technology was applied to part design in CAD system, brought forward a new three dimensional modeling method by networked parameter drive.
本文将网络化信息发布技术应用于CAD系统的零件设计，提出了通过网络化参数驱动建立三维模型的新方法。
These formulas lay a foundation for improving the design quality and developing a CAD system of this kind of cams.
这些公式为提高这类凸轮的设计质量，建立它们的CAD系统提供了基础。
The use of the leading domestic iron grating design CAD system can provide users with the most perfect grating layout.
采用国内领先铁cad钢格板设计系统，可为用户提供最完美的钢格板布局设计。
Based on the platform, an intellectual CAD system for specific product design can be developed rapidly.
利用该平台可以快速开发出针对特定产品设计的智能CAD系统。
This paper introduces a way of inputting picture in CAD system of sectional die design.
介绍了一种用于镶块模c A D系统设计的图形输入方法。
According to characteristics of the motorcycle property test facility, a set of MXSS CAD system of serial product design fitting the motor parts property test facility is researched and developed.
针对摩托车性能试验设备的特点，研制开发了一套适合于摩托车零部件性能试验设备系列产品设计的MXSS -CAD系统。
This paper deals with the CAD expert system in typical welding structure, its design concept and method and its application prospect.
论述了典型焊接结构CAD专家系统的内涵、设计思想和设计方法过程以及应用前景。
The company has advanced CAD-aided design system.
公司拥有先进的CAD 辅助设计系统。
To improve the efficiency of the design, the CAD automatic design and parametric drawing system for bursting disc devices was developed.
为了提高爆破片装置的设计效率，开发了爆破片装置CAD参数化自动设计与绘图系统。
The overall design CAD system of vehicles is developed for the product design in enterprises.
汽车总体设计CAD系统是为企业的产品设计而开发的软件。
The design of the system applies the technologies of CAD and es.
系统设计应用计算机辅助设计和专家系统技术。
Based on the existing CAD system, the robotic assembly-oriented concurrent design sys - tem has been developed.
在现有CAD系统的基础上，开发一面向机器人装配的并行设计系统。
The special Computer Aided Design (CAD) system is the necessary way to improve the sound quality of vehicle by promoting the design quality and efficiency of products.
专用计算机辅助设计（CAD）系统可以改善产品设计质量、提高生产效率，是提高车辆声品质的重要方法。
Imitate the process of manual design and use computer to aid the design with blanking die CAD system.
冲裁模cad系统设计，主要是模拟模具手工设计的过程，实现计算机辅助设计。
The basic method for aided design on microcomputer is discussed. The mutual CAD system for die design is set up.
论述了在微机系统上辅助设计的基本方法，建立了模具设计的交互式CAD系统。
This paper develops a CAD system of CAM design for this CAM linkage by using integrated analysis and synthesis in mechanism.
本文采用集成凸轮设计与机构分析为一体的方法，实现并开发了这类凸轮机构凸轮设计的CAD系统。
This paper develops a CAD system of CAM design for this CAM linkage by using integrated analysis and synthesis in mechanism.
本文采用集成凸轮设计与机构分析为一体的方法，实现并开发了这类凸轮机构凸轮设计的CAD系统。
应用推荐