Roller gear CAM mechanism is a type of indexing device. It is widely used in various automatic machines because of large indexing Numbers, high indexing precision, reliable localization etc.
弧面分度凸轮机构是一种精密分度机构，因其具有分度数大、分度精度高、定位可靠等优点，被广泛应用于各种自动机械中。
It realizes the dynamic indexing precision and static indexing precision testing on dimensional globoid indexing CAM mechanism.
实现了对空间弧面分度凸轮机构的动分度精度检测和静分度精度的检测。
The primary coverage as follows:Firstly, according to the running features of the globoidal indexing cam mechanism establishes mathematical model, then builds overall design.
主要内容如下：首先根据弧面分度凸轮机构的运行特点建立数学模型，并进行总体设计。
One of the major projects in old loom reform and new loom design is to substitute the CAM mechanism with link mechanism.
用连杆机构取代凸轮机构是老机改造和新机开发中的重要课题之一。
The signal control can be easily realized by this virtual CAM mechanism with good stability, high reliability, and better practical value.
这种虚拟凸轮机构能方便地实现电信号控制，稳定性好，可靠性高，具有很好的实用价值。
The problem is important for the design and application of the CAM mechanism.
在凸轮机构的设计和应用中必须重视这一问题。
This paper proposes double action parallel indexing CAM mechanism, and studies cams profile by methods used in gear meshing.
提出了双作用式平行分度凸轮机构，并按研究齿轮啮合的方法研究其凸轮廓线。
The Motion law design directly influences the operation accuracy of the CAM mechanism.
运动规律的设计，直接影响凸轮机构的运行精度。
This thesis discusses CAD for globular indexing CAM mechanism on base of reverse engineering.
本文是围绕弧面分度凸轮机构CAD中的逆向设计进行的。
In this paper, the pressure Angle and minimal radius of curvature of CAM mechanism with swinging roller follower are discussed in details.
本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。
An analytical design method of disk CAM mechanism with oscillating roller follower is introduced.
介绍了摆动滚子从动件盘形凸轮机构设计的解析法。
Based on the theory of forming cycloidal gear, this paper discusses the basic fundamentals and methods of machining cycloidal gear with CAM mechanism.
根据摆线齿轮齿廓的形成理论，探讨利用凸轮机构实现摆线齿轮加工的原理和方法。
In this paper, the calculating method for the contact stress of plate CAM mechanism with translating roller moving follower is presented, and some examples are given.
本文详细分析了对心滚子移动从动件盘形凸轮机构接触应力的计算方法，并给出具体计算例题。
This paper describes the establishing process of the equation of working profile curved surface of worm CAM mechanism, the calculation of its pressure Angle and normal curvature.
介绍了圆锥滚子蜗杆凸轮机构的轮廓曲面方程的建立、压力角和啮合曲面法曲率的计算过程。
The result shows that though such method we can efficiently obtain first tolerance design optimum for CAM mechanism, and thus realizes first Product Correct (FPC).
结果表明该方法保证了凸轮机构公差设计一次达到最优，从而实现了一次产品成功。
A kind of effective thought of design and method of analysis for determining the CAM profile of parallel indexing CAM mechanism was introduced.
介绍一种确定平行分度凸轮机构凸轮轮廓的有效设计思路和分析方法。
The roller gear cam mechanism is studied and the surface equations of various types of roller gear cam are acquired.
本文对弧面分度凸轮机构进行了研究，根据凸轮旋向、转向、头数的不同，推导了各种类型的弧面分度凸轮的通用方程；
Theorical and experimental investigation on programmable cam mechanism are conducted in this dissertation.
论文以可控凸轮机构为研究对象，进行了理论和实验研究。
Impact and vibration will reduce the precision of CAM mechanism, result in invalidation of CAM mechanism.
从动件运动时产生的冲击和振动会造成凸轮机构传动精度的降低，使凸轮传动系统产生失效。
The theoretical base of the new cam mechanism and the designing steps of the cam contour are discussed.
本文就这种新型凸轮机构的理论基础与凸轮轮廓曲线的设计步骤进行了详细论述。
Methods for solving number of degrees of freedom of planar mechanism are put forward by solving that of mechanism such as planar linkage mechanism, cam mechanism, gear mechanism, and so on.
通过对平面连杆机构、凸轮机构和齿轮机构等机构自由度数的求解分析，提出了准确求解平面机构自由度数的方法。
The paper researches designing method of the motion rule-divisible cam mechanism , makes a detailed analysis of the mathematical equation, and builds the mathematical model of the cam mechanism .
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构。
For vacuum circuit breaker with spring operating mechanism, an optimum design of CAM mechanism is significant to make the output force characteristics match the load characteristics.
对与真空断路器相配的弹簧操动机构而言，其输出力特性和开关负载特性的合理匹配取决于凸轮机构的合理设计。
The paper researches designing method of the motion rule-divisible CAM mechanism, makes a detailed analysis of the mathematical equation, and builds the mathematical model of the CAM mechanism.
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构的数学模型。
With the background of Gatling gun′s cam curve slot and main roller system, dynamics analysis of high speed inverse cylinder cam mechanism was carried out.
以转管武器凸轮曲线槽主滚轮系统为背景，进行了高速反圆柱凸轮机构滚轮动力学分析。
The user can input link mechanisms, gear mechanism and CAM mechanism visually. The software can identify the types and number of basic mechanisms intelligently and record the path identifying.
该软件可以使用户可视化地任意输入连杆机构、齿轮机构、凸轮机构等，并能智能识别出机构中的基本机构的类型及其数目，并记录识别路径。
The influence of errors of cam profiles on the dynamic accuracy of cam mechanism is studied using the correlation function method, and a calculation means of dynamic accuracy is given.
运用相关函数法研究了凸轮廓线误差对凸轮机构从动件动力精度的影响，并给出了动力精度的求解方法。
The other is a mechanical automatic reversing mechanism designed for atmospheric pumps, which adopts involute (zero pressure Angle) CAM mechanism as reversing mechanism.
另一种是为气压泵设计的机动自动换向机构，该机构是利用渐开线(零度压力角)凸轮机构作为换向机构。
The operating principle of seaming mechanism of automatic paper cup machine was introduced and the motion law of the CAM mechanism was analyzed.
以机械机构的参数化设计为启示，论述了全自动纸杯成型机卷封机构的工作原理，分析了卷封凸轮机构的运动规律。
Based on the analysis of traditional worm CAM mechanism, it introduces a new worm CAM mechanism.
在分析传统蜗形凸轮传动机构特点的基础上，设计出了一种新型的蜗形凸轮传动机构。
应用推荐