• Together they form a closed die.

    两者合在一起形成闭式锻模。

    youdao

  • And as for the closed die forging, billet size will affect the process directly.

    而且,对于闭式模锻工艺而言,坯料尺寸直接影响模锻工艺的顺利进行。

    youdao

  • The differential gauge forging can be made by general open die or horizontal split precision closed die.

    差压计锻件可以采用普通开式模锻成形和可分凹模多向闭塞精密模锻成形。

    youdao

  • The densification effects of upsetting and repressing are compared, and a technology design principle for closed die forging is suggested .

    分析了粉末烧结材料镦粗和复压工艺的致密效果,提出了闭式模锻工艺设计原则。

    youdao

  • Closed-die forging can produce components of greater complexity and accuracy, with a better surface finish than the more traditional methods not using closed dies.

    闭式模锻能生产高度复杂和精确的零件,而且表面光洁度要比不用闭式锻模的更传统方法好。

    youdao

  • Using closed die upsetting process to manufacture thick wall tubes on normal hydraulic press may cause the dis uniformity of the thickness along the length of the tube.

    提出了一种浮动凹模芯模闭式镦粗法,以解决厚壁管在单向加压的普通液压机上进行闭式镦粗后壁厚不均的问题。

    youdao

  • The research results will be significant for extending the engineering application of cross wedge rolling, especially for the application of forming blank for closed die forging.

    研究结果对于扩大楔横轧工艺的应用有实际意义,尤其是对于锻件制坯成形的应用,将起到良好的作用。

    youdao

  • In powder forging an as-pressed component is usually heated to a forging temperature significantly below the usual sintering temperature of the material and then forged in a closed die.

    在粉末锻造中,压制零件一般加热到远低于该材料通常烧结温度的锻造温度,然后在闭模中锻造。

    youdao

  • In this paper, the metal flow route during closed die extrusion for spiral bevel driving gear of automotive final drive is analyzed and the profile of preformed blank has been designed.

    分析了主动螺旋伞齿轮闭塞挤压的金属流动路线,设计了预制坯的形状。

    youdao

  • Forged part and forming procedure and stroke-load curve obtained from rigid plastic FE simulation further discloses the deformation mechanics of closed die extrusion for spiral bevel driving gear.

    刚塑性有限元计算所得的齿轮锻件图、成形过程图、轴向断面网格图和力能曲线进一步揭示了螺旋伞齿轮塑性成形机理;

    youdao

  • The spring back and secondary yielding of cylindrical billets in elastic tools during upsetting and closed-die upsetting are analyzed.

    对圆柱形工件在弹性工具中镦粗和闭合模镦粗时的回弹和二次屈服进行了分析。

    youdao

  • Unsuccessful corner filling and excessive deformation force are the main limitations of classical cold closed-die forging of straight spur gear.

    齿形充填不满和成形力过高是齿轮闭式锻造典型方案的缺陷。

    youdao

  • Study on microstructure and properties of closed-die cold forging of bevel gear used in case of automobile differential;

    借助现代冶金分析技术对闭塞冷锻行星齿轮的晶粒尺寸、硬度变化和残余应力分布规律进行了研究。

    youdao

  • A distinction may be made between open-die forging, usually in the form of hammer forging, and closed-die forging.

    锤锻中常用的开式模锻与闭式模锻是有区别的。

    youdao

  • A distinction may be made between open-die forging, usually in the form of hammer forging, and closed-die forging.

    锤锻中常用的开式模锻与闭式模锻是有区别的。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定